| Manufacturer | KH MTech |
|---|---|
| Model | 3.5 Inch Tube Mill |
| Year | 2017 |
| Location | South Korea
|
Overview
Manufacturer: KH MTech
Model: 3.5 Inch Tube Mill
Year of manufacture: 2017
Condition: Used
Note: Rolling mill not included
This listing is for a used 3.5 inch tube mill line supplied by KH MTech. The equipment is presented as a multi-module line suitable for producing round, square and rectangular welded tubes within the size ranges shown below. The rolling mill is explicitly not included in this offering; the line components listed under “Included Modules” are supplied without the upstream rolling mill.
Included modules
- Uncoiler
- Pinch leveler
- Shear welder
- Rotary looper (accumulator)
- Forming part and forming part drive
- Cooling part
- Sizing part
- Cut off machine
- Run out conveyor
Production capacity and tube specifications
- Round tubes: 48.6 mm to 89.1 mm (1.9" to 3.5")
- Square tubes: 40 x 40 mm to 75 x 75 mm
- Rectangular tubes: 50 x 30 mm to 100 x 50 mm
- Tube outer diameter range indicated as 34.0 mm to 101.6 mm
- Thickness range: 1.2 mm to 3.2 mm
Coil and line specifications
- Coil outer diameter: maximum 1800 mm
- Coil inner diameter: 508 mm
- Coil width: 40 mm to 100 mm
- Hoop width: maximum 300 mm
- Maximum coil weight: 5 ton
- Line speed: up to 120 m/min
- Line direction: left to right (L → R)
Electrical and welding
- Main electrical supply: AC 380 V, 60 Hz, 3-phase
- Welding capacity: 350 kW (400 KVA)
Important notes
- The description and specifications above are taken from the available product information. No additional components, hours of use, testing status, warranty, or refurbishment claims are provided. For further technical details, electrical requirements at your site, shipping, or to request inspection reports and operational history, please contact the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: KH MTech
Model: 3.5 Inch Tube Mill
Year of Manufacture: 2017
Condition: Used
Note: Rolling mill not included
Included Modules: Composition Uncoiler; Pinch Leveler; Shear Welder; Rotary Looper (Accumulator); Forming Part; Forming Part Drive; Cooling Part; Sizing Part; Cut Off Machine; Run Out Conveyor
Production Capacity: Round tubes 48.6 mm to 89.1 mm; Square tubes 40x40 to 75x75; Rectangular tubes 50x30 to 100x50
Coil Specifications: Outer Diameter max 1800 mm; Inner Diameter 508 mm; Width 40-100 mm; Hoop Width max 300 mm; Coil Weight 5 ton
Tube Specifications: Outer Diameter 34.0-101.6 mm; Thickness 1.2-3.2 mm
Line Information: Speed max 120 m/min; Direction L → R
Electrical Power: AC380V, 60 Hz, 3P
Welding Capacity: 350 kW (400 KVA)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| forging-preform-trimming-and-sizing-presses-kh-mtech-35-inch-tube-mill-p260818077_3.pdf | Download |
| forging-preform-trimming-and-sizing-presses-kh-mtech-35-inch-tube-mill-p260818077_3.pdf | Download |
| forging-preform-trimming-and-sizing-presses-kh-mtech-35-inch-tube-mill-p260818077_3.pdf | Download |
| forging-preform-trimming-and-sizing-presses-kh-mtech-35-inch-tube-mill-p260818077_3.pdf | Download |
| forging-preform-trimming-and-sizing-presses-kh-mtech-35-inch-tube-mill-p260818077_3.pdf | Download |
| forging-preform-trimming-and-sizing-presses-kh-mtech-35-inch-tube-mill-p260818077_8.pdf | Download |
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Nov. 3, 2026 |
Manufacturer: KH MTech
Model: 3.5 Inch Tube Mill
Year of Manufacture: 2017
Condition: Used
Note: Rolling mill not included
Included Modules: Composition Uncoiler; Pinch Leveler; Shear Welder; Rotary Looper (Accumulator); Forming Part; Forming Part Drive; Cooling Part; Sizing Part; Cut Off Machine; Run Out Conveyor
Production Capacity: Round tubes 48.6 mm to 89.1 mm; Square tubes 40x40 to 75x75; Rectangular tubes 50x30 to 100x50
Coil Specifications: Outer Diameter max 1800 mm; Inner Diameter 508 mm; Width 40-100 mm; Hoop Width max 300 mm; Coil Weight 5 ton
Tube Specifications: Outer Diameter 34.0-101.6 mm; Thickness 1.2-3.2 mm
Line Information: Speed max 120 m/min; Direction L → R
Electrical Power: AC380V, 60 Hz, 3P
Welding Capacity: 350 kW (400 KVA)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
Manufacturer: KH MTech
Model: 3.5 Inch Tube Mill
Year of manufacture: 2017
Condition: Used
Note: Rolling mill not included
This listing is for a used 3.5 inch tube mill line supplied by KH MTech. The equipment is presented as a multi-module line suitable for producing round, square and rectangular welded tubes within the size ranges shown below. The rolling mill is explicitly not included in this offering; the line components listed under “Included Modules” are supplied without the upstream rolling mill.
Included modules
- Uncoiler
- Pinch leveler
- Shear welder
- Rotary looper (accumulator)
- Forming part and forming part drive
- Cooling part
- Sizing part
- Cut off machine
- Run out conveyor
Production capacity and tube specifications
- Round tubes: 48.6 mm to 89.1 mm (1.9" to 3.5")
- Square tubes: 40 x 40 mm to 75 x 75 mm
- Rectangular tubes: 50 x 30 mm to 100 x 50 mm
- Tube outer diameter range indicated as 34.0 mm to 101.6 mm
- Thickness range: 1.2 mm to 3.2 mm
Coil and line specifications
- Coil outer diameter: maximum 1800 mm
- Coil inner diameter: 508 mm
- Coil width: 40 mm to 100 mm
- Hoop width: maximum 300 mm
- Maximum coil weight: 5 ton
- Line speed: up to 120 m/min
- Line direction: left to right (L → R)
Electrical and welding
- Main electrical supply: AC 380 V, 60 Hz, 3-phase
- Welding capacity: 350 kW (400 KVA)
Important notes
- The description and specifications above are taken from the available product information. No additional components, hours of use, testing status, warranty, or refurbishment claims are provided. For further technical details, electrical requirements at your site, shipping, or to request inspection reports and operational history, please contact the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Nov. 3, 2026 |
Тръбогиб KH MTech 3.5 Inch Tube Mill
Ohýbačka trubek KH MTech 3.5 Inch Tube Mill
KH MTech 3.5 Inch Tube Mill Rørbukningsmaskine
KH MTech 3.5 Inch Tube Mill Rohrbiegemaschine
Μηχανή κάμψης σωλήνων KH MTech 3.5 Inch Tube Mill
KH MTech 3.5 Inch Tube Mill Tube bending machine
Curvadora de tubos KH MTech 3.5 Inch Tube Mill
Cintreuse de tubes KH MTech 3.5 Inch Tube Mill
Savijač cijevi KH MTech 3.5 Inch Tube Mill
KH MTech 3.5 Inch Tube Mill Csőhajlító gép
Curvatubi KH MTech 3.5 Inch Tube Mill
KH MTech 3.5 Inch Tube Mill Vamzdžių lenkimo staklės
KH MTech 3.5 Inch Tube Mill Buisbuigmachine
Giętarka do rur KH MTech 3.5 Inch Tube Mill
Curvadora de tubos KH MTech 3.5 Inch Tube Mill
Mașină de îndoire a țevilor KH MTech 3.5 Inch Tube Mill
KH MTech 3.5 Inch Tube Mill Трубогиб
Savijač cevi KH MTech 3.5 Inch Tube Mill
KH MTech 3.5 Inch Tube Mill Rörbockningsmaskin
Boru bükme makinesi KH MTech 3.5 Inch Tube Mill
EN
- Languages
English (GB)