Contact us to receive an offer.
| Manufacturer | JORNS |
|---|---|
| Model | MaxiLine 200S-SMCNC400A-6 |
| Year | 2004 |
| Location | Poland
|
This is a controlled edge bending machine manufactured by JORNS, model MaxiLine 200S-SMCNC400A-6, produced in 2004 in Switzerland. It offers a bending capacity of 6050 mm in length and can handle sheet metal thicknesses up to 2.0 mm, suitable for materials such as St40 steel. The machine features a hydraulic clamping and bending drive system, with a jaw opening of 300 mm and a total drive power of 5.5 kW. It weighs approximately 6000 kg.
The bending angle and stop settings are programmable and can be adjusted from the CNC panel, allowing for precise control. The machine supports both manual and automatic operation modes, with a minimum achievable bending angle of 35 degrees. Additionally, it is equipped with a guillotine cutter capable of cutting sheets up to 2 mm thick.
Visually, the machine is painted blue and includes multiple folding segments—five prominent folding segments are visible, each marked with warning labels for safety. A red safety bar runs along the front bottom of the machine, enhancing operator safety. The surface of the machine shows signs of wear and use, including some discoloration and marks, which is typical for industrial equipment of this age and usage.
This folding machine comes with documentation and is suitable for industrial applications requiring precise edge bending and cutting of sheet metal up to the specified dimensions and thickness.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Controlled edge bending machine manufactured by JORNS, type MaxiLine 200S-SMCNC400A-6, Switzerland, bending capacity 6050 x 2 mm, year 2004.
Thickness of bent sheet steel (St40) 2 mm, bending length 6050 mm.
The machine is equipped with a guillotine cutter up to 2 mm.
Setting the bending angle and stop from the CNC panel.
Programming
Minimum angle up to 35 degrees.
Very simple operation of the machine, manual and automatic mode.
Hydraulic clamping and bending drive.
Jaw opening 300 mm.
Total drive 5.5 kW, weight 6000 kg.
Documentation
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 63 |
| Last activity | Oct. 27, 2026 |
Controlled edge bending machine manufactured by JORNS, type MaxiLine 200S-SMCNC400A-6, Switzerland, bending capacity 6050 x 2 mm, year 2004.
Thickness of bent sheet steel (St40) 2 mm, bending length 6050 mm.
The machine is equipped with a guillotine cutter up to 2 mm.
Setting the bending angle and stop from the CNC panel.
Programming
Minimum angle up to 35 degrees.
Very simple operation of the machine, manual and automatic mode.
Hydraulic clamping and bending drive.
Jaw opening 300 mm.
Total drive 5.5 kW, weight 6000 kg.
Documentation
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This is a controlled edge bending machine manufactured by JORNS, model MaxiLine 200S-SMCNC400A-6, produced in 2004 in Switzerland. It offers a bending capacity of 6050 mm in length and can handle sheet metal thicknesses up to 2.0 mm, suitable for materials such as St40 steel. The machine features a hydraulic clamping and bending drive system, with a jaw opening of 300 mm and a total drive power of 5.5 kW. It weighs approximately 6000 kg.
The bending angle and stop settings are programmable and can be adjusted from the CNC panel, allowing for precise control. The machine supports both manual and automatic operation modes, with a minimum achievable bending angle of 35 degrees. Additionally, it is equipped with a guillotine cutter capable of cutting sheets up to 2 mm thick.
Visually, the machine is painted blue and includes multiple folding segments—five prominent folding segments are visible, each marked with warning labels for safety. A red safety bar runs along the front bottom of the machine, enhancing operator safety. The surface of the machine shows signs of wear and use, including some discoloration and marks, which is typical for industrial equipment of this age and usage.
This folding machine comes with documentation and is suitable for industrial applications requiring precise edge bending and cutting of sheet metal up to the specified dimensions and thickness.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2012 |
| Offers online | 63 |
| Last activity | Oct. 27, 2026 |
| Working length | 6100 mm |
|---|---|
| Type | Sheet metal |
| Max. thickness | 3 mm |
|---|
Poland
1993
| Working length | 6100 mm |
|---|
| Max. thickness | 2.5 mm |
|---|
| Working length | 8000 mm |
|---|---|
| Type | Sheet metal |
| Max. thickness | 2.5 mm |
|---|
Poland
2001
| Working length | 6100 mm |
|---|
| Max. thickness | 2 mm |
|---|
Poland
2001
| Working length | 6100 mm |
|---|
| Max. thickness | 2 mm |
|---|
Poland
2007
| Working length | 6400 mm |
|---|---|
| Type | Sheet metal |
| Max. thickness | 2 mm |
|---|
Poland
1993
Netherlands
1997
| Working length | 6000 mm |
|---|
| Max. thickness | 1.5 mm |
|---|
Машина за сгъване JORNS MaxiLine 200S-SMCNC400A-6
Ohýbačka plechu JORNS MaxiLine 200S-SMCNC400A-6
JORNS MaxiLine 200S-SMCNC400A-6 Foldemaskine
JORNS MaxiLine 200S-SMCNC400A-6 Abkantmaschine
Πτυσσόμενη μηχανή JORNS MaxiLine 200S-SMCNC400A-6
JORNS MaxiLine 200S-SMCNC400A-6 Folding machine
Plegadora manual JORNS MaxiLine 200S-SMCNC400A-6
Plieuse d'établi JORNS MaxiLine 200S-SMCNC400A-6
Stroj za savijanje JORNS MaxiLine 200S-SMCNC400A-6
JORNS MaxiLine 200S-SMCNC400A-6 Összecsukható gép
Piegatrice JORNS MaxiLine 200S-SMCNC400A-6
Lankstymo mašina JORNS MaxiLine 200S-SMCNC400A-6
JORNS MaxiLine 200S-SMCNC400A-6 Vouwmachine
Używana zaginarka JORNS MaxiLine 200S-SMCNC400A-6
Máquina dobrável JORNS MaxiLine 200S-SMCNC400A-6
Mașină de pliat JORNS MaxiLine 200S-SMCNC400A-6
JORNS MaxiLine 200S-SMCNC400A-6 Гибочный станок
Mašina za preklapanje JORNS MaxiLine 200S-SMCNC400A-6
JORNS MaxiLine 200S-SMCNC400A-6 Vikmaskin
Bükme / Katlama makinesi JORNS MaxiLine 200S-SMCNC400A-6
Belgium
EN
- Languages
English (GB)