Contact us to receive an offer.
| Manufacturer | IPG Photonics |
|---|---|
| Model | YLR-3000 |
| Year | 2021 |
| Location | Greece
|
Product: IPG Photonics YLR-3000 Fiber Laser Source
Manufacturer: IPG Photonics
Model: YLR-3000
Year of manufacture: 2021
Type: Fiber
Technical condition: As-is, where-is
State: Packed
Overview:
This listing is for an IPG Photonics YLR-3000 fiber laser source. The unit is described as having been repaired by IPG Photonics and is offered with the associated repair and service documentation. The item is being sold in its current condition (as-is, where-is) and is supplied in packed condition.
Key specifications (as provided):
- Nominal output power: 3000 W
- Operation mode: CW / Modulated
- Modulation frequency: Up to 50 kHz
- Electrical supply: 3-phase, 400–480 VAC, 50/60 Hz
- Maximum power consumption: 7400–8500 W (approx. 7900–9000 VA)
- Control interfaces: Analog, RS-232, Ethernet
- Cooling method: Water cooling (tap or deionized water)
- Water flow rate: 15 L/min
- Recommended water temperature range: 21°C to 25°C (above dew point)
- Chiller capacity requirement: 4.8 kW to 5.5 kW
- Dimensions (L x W x H): 1100 x 760 x 450 mm
- Weight: 90 kg
Documentation included (as listed):
- IPG failure/repair analysis report
- Authenticity/service documentation
Notes and buyer guidance:
- The unit is sold as-is. Prospective buyers should review the provided repair documentation and may request additional photographs or information prior to purchase.
- No additional components or accessories are described in the provided information. If specific accessories or verification of operational status are required, please request those details.
If you would like copies of the repair report, additional photographs, or further technical information, please request them before placing an order.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer title: IPG Photonics YLR-3000 Fiber Laser Source
Manufacturer: IPG Photonics
Model: YLR-3000
Year of manufacture: 2021
Technical condition: As-is, where-is
State: Packed
Type: Fiber
Nominal output power: 3000 W
Operation mode: CW / Modulated
Modulation frequency: Up to 50 kHz
Electrical supply: 3-phase, 400–480 VAC, 50/60 Hz
Maximum power consumption: 7400–8500 W (approx. 7900–9000 VA)
Control interfaces: Analog, RS-232, Ethernet
Cooling method: Water cooling via tap or deionized water
Water flow rate: 15 L/min
Water temperature range: 21°C to 25°C (above dew point)
Chiller capacity requirement: 4.8 kW to 5.5 kW
Dimensions (L x W x H): 1100 x 760 x 450 mm
Weight: 90 kg
Power: 3000 W
Highlights: Officially repaired by IPG Photonics; Fully tested and verified by the manufacturer; Excellent working condition; Complete repair and service documentation included; Ready for immediate installation and operation
Documentation included: IPG failure/repair analysis report; Authenticity/service documentation
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Nov. 7, 2026 |
Offer title: IPG Photonics YLR-3000 Fiber Laser Source
Manufacturer: IPG Photonics
Model: YLR-3000
Year of manufacture: 2021
Technical condition: As-is, where-is
State: Packed
Type: Fiber
Nominal output power: 3000 W
Operation mode: CW / Modulated
Modulation frequency: Up to 50 kHz
Electrical supply: 3-phase, 400–480 VAC, 50/60 Hz
Maximum power consumption: 7400–8500 W (approx. 7900–9000 VA)
Control interfaces: Analog, RS-232, Ethernet
Cooling method: Water cooling via tap or deionized water
Water flow rate: 15 L/min
Water temperature range: 21°C to 25°C (above dew point)
Chiller capacity requirement: 4.8 kW to 5.5 kW
Dimensions (L x W x H): 1100 x 760 x 450 mm
Weight: 90 kg
Power: 3000 W
Highlights: Officially repaired by IPG Photonics; Fully tested and verified by the manufacturer; Excellent working condition; Complete repair and service documentation included; Ready for immediate installation and operation
Documentation included: IPG failure/repair analysis report; Authenticity/service documentation
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Product: IPG Photonics YLR-3000 Fiber Laser Source
Manufacturer: IPG Photonics
Model: YLR-3000
Year of manufacture: 2021
Type: Fiber
Technical condition: As-is, where-is
State: Packed
Overview:
This listing is for an IPG Photonics YLR-3000 fiber laser source. The unit is described as having been repaired by IPG Photonics and is offered with the associated repair and service documentation. The item is being sold in its current condition (as-is, where-is) and is supplied in packed condition.
Key specifications (as provided):
- Nominal output power: 3000 W
- Operation mode: CW / Modulated
- Modulation frequency: Up to 50 kHz
- Electrical supply: 3-phase, 400–480 VAC, 50/60 Hz
- Maximum power consumption: 7400–8500 W (approx. 7900–9000 VA)
- Control interfaces: Analog, RS-232, Ethernet
- Cooling method: Water cooling (tap or deionized water)
- Water flow rate: 15 L/min
- Recommended water temperature range: 21°C to 25°C (above dew point)
- Chiller capacity requirement: 4.8 kW to 5.5 kW
- Dimensions (L x W x H): 1100 x 760 x 450 mm
- Weight: 90 kg
Documentation included (as listed):
- IPG failure/repair analysis report
- Authenticity/service documentation
Notes and buyer guidance:
- The unit is sold as-is. Prospective buyers should review the provided repair documentation and may request additional photographs or information prior to purchase.
- No additional components or accessories are described in the provided information. If specific accessories or verification of operational status are required, please request those details.
If you would like copies of the repair report, additional photographs, or further technical information, please request them before placing an order.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | Nov. 7, 2026 |
IPG Photonics YLR-3000 Влакнест лазерен източник
Vláknový laserový zdroj IPG Photonics YLR-3000
IPG Photonics YLR-3000 fiberlaserkilde
Faserlaserquelle IPG Photonics YLR-3000
Πηγή οπτικής ίνας IPG Photonics YLR-3000
IPG Photonics YLR-3000 Fiber Laser Source
Fuente láser de fibra IPG Photonics YLR-3000
Source laser à fibre IPG Photonics YLR-3000
IPG Photonics YLR-3000 Izvor laserskog vlakna
IPG Photonics YLR-3000 Száloptikás Lézerforrás
Sorgente Laser a Fibra IPG Photonics YLR-3000
IPG Photonics YLR-3000 pluošto lazerio šaltinis
IPG Photonics YLR-3000 vezellaserbron
Źródło lasera światłowodowego IPG Photonics YLR-3000
Fonte de Laser de Fibra IPG Photonics YLR-3000
Sursa de laser cu fibră IPG Photonics YLR-3000
Волоконный лазерный источник IPG Photonics YLR-3000
IPG Photonics YLR-3000 Izvor laserskog vlakna
IPG Photonics YLR-3000 fiberlaserkälla
IPG Photonics YLR-3000 Fiber Lazer Kaynağı
EN
- Languages
English (GB)