| Manufacturer | Invernizzi |
|---|---|
| Model | DTM2 |
| Year | 1997 |
| Location | Italy
|
| Category | Forging - Mechanical presses |
| Power in tons | 120 T |
| Table length | 1700 mm |
| Table width | 600 mm |
| Ram stroke | 110 mm |
| Engine Power | 15.6 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | yes |
| status | |
| Datasheet | INVERNIZZI DTM2 |
| Last availability date | 03/11/2026 |
| Product id | P260126083 |
| Language |
Механична преса Invernizzi DTM2
Mechanický lis Invernizzi DTM2
Invernizzi DTM2 Mekanisk presse
Invernizzi DTM2 Mechanische Presse
Μηχανική πρέσα Invernizzi DTM2
Invernizzi DTM2 Mechanical press
Prensa mecánica Invernizzi DTM2
Presse mécanique Invernizzi DTM2
Mehanička preša Invernizzi DTM2
Invernizzi DTM2 Mechanikus prés
Pressa meccanica Invernizzi DTM2
Mechaninis presas Invernizzi DTM2
Invernizzi DTM2 Mechanische pers
Prasa mechaniczna Invernizzi DTM2
Prensa mecânica Invernizzi DTM2
Presă mecanică Invernizzi DTM2
Invernizzi DTM2 Механические прессы
Mehanička presa Invernizzi DTM2
Invernizzi DTM2 Mekanisk press
Mekanik presler Invernizzi DTM2
|
This listing is for an Invernizzi mechanical press, model DTM2, manufactured in 1997. The press has a capacity of 120 tons and features a ram stroke of 110 mm. The machine's ram dimensions are 1700 mm in length and 600 mm in width, providing a substantial working area. The overall height of the press is 3250 mm.
The press is powered by a 15.6 kW engine and operates with a line voltage of 220 volts, along with auxiliary voltages of 110 and 24 volts. It functions under a pressure of 5 atm, with a balancing device pressure range of 2 to 4 atm. The machine is capable of delivering between 30 to 120 strikes per minute.
The mechanical press is primarily white and includes hydraulic and pneumatic components. It is equipped with a yellow safety guard on the side, as well as pressure gauges and a control panel for operational monitoring. The exterior of the machine shows signs of dirt and wear consistent with industrial use, but no major damage is visible.
Additional items visible near the machine include a broom, a wooden box with metal rods, and a red tool cabinet with some stored items. A black cable or hose is coiled and hanging on the front of the press.
This mechanical press is offered as-is and where-is. Potential buyers should consider the condition and inspect the machine accordingly before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Invernizzi
Model: DTM2
Year of Manufacture: 1997
Technical Condition: As-is, where-is
Capacity: 120 ton
Type: DTM2
Stroke: 110 mm
Strikes: 30 – 120 al min
Ram Dimensions: 1700 x 600 mm
Height: 3250 mm
Light at 500 mm: Yes
Absorption: 15.6 kW
Line Voltage: 220 Volt
Auxiliary Voltage: 110 - 24 Volt
Pressure: 5 Atm
Balancing Device Pressure: 2-4 Atm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 30 |
| Last activity | Nov. 7, 2026 |
Sidicom Group S.R.L. is a leading Italian company specializing in the trade of new and refurbished machinery for the sheet metal and swarf industries. With a strong presence in the market, Sidicom offers a comprehensive range of equipment, including mechanical and hydraulic presses, forming presses, shears, and feeder lines. Their extensive inventory also features a variety of machines such as bending rolls, punching machines, and lifting and handling equipment, catering to diverse industrial needs. Located in Limena, Padua, Sidicom Group S.R.L. operates from a fully equipped facility that ensures meticulous inspection and potential revamping of used machinery, guaranteeing compliance with current regulations. Their commitment to quality is further demonstrated through complete mechanical and electrical retrofitting services, providing clients with equipment that matches the productivity of new machines while offering cost-effective solutions. Beyond machinery sales, Sidicom Group S.R.L. offers a suite of services, including 360° complete consultancy, maintenance, compliance and safety certifications, as well as transport and installation. Their dedicated team of skilled technicians and consultants work closely with clients to identify optimal machinery solutions, ensuring seamless integration and long-term operational efficiency. With a focus on sustainable innovation and customer satisfaction, Sidicom Group S.R.L. stands as a trusted partner for businesses seeking reliable and high-quality machinery solutions in the sheet metal and swarf sectors.
Manufacturer: Invernizzi
Model: DTM2
Year of Manufacture: 1997
Technical Condition: As-is, where-is
Capacity: 120 ton
Type: DTM2
Stroke: 110 mm
Strikes: 30 – 120 al min
Ram Dimensions: 1700 x 600 mm
Height: 3250 mm
Light at 500 mm: Yes
Absorption: 15.6 kW
Line Voltage: 220 Volt
Auxiliary Voltage: 110 - 24 Volt
Pressure: 5 Atm
Balancing Device Pressure: 2-4 Atm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Mechanical presses |
| Power in tons | 120 T |
| Table length | 1700 mm |
| Table width | 600 mm |
| Ram stroke | 110 mm |
| Engine Power | 15.6 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | yes |
| status | |
| Datasheet | INVERNIZZI DTM2 |
| Last availability date | 03/11/2026 |
| Product id | P260126083 |
| Language |
Механична преса Invernizzi DTM2
Mechanický lis Invernizzi DTM2
Invernizzi DTM2 Mekanisk presse
Invernizzi DTM2 Mechanische Presse
Μηχανική πρέσα Invernizzi DTM2
Invernizzi DTM2 Mechanical press
Prensa mecánica Invernizzi DTM2
Presse mécanique Invernizzi DTM2
Mehanička preša Invernizzi DTM2
Invernizzi DTM2 Mechanikus prés
Pressa meccanica Invernizzi DTM2
Mechaninis presas Invernizzi DTM2
Invernizzi DTM2 Mechanische pers
Prasa mechaniczna Invernizzi DTM2
Prensa mecânica Invernizzi DTM2
Presă mecanică Invernizzi DTM2
Invernizzi DTM2 Механические прессы
Mehanička presa Invernizzi DTM2
Invernizzi DTM2 Mekanisk press
Mekanik presler Invernizzi DTM2
|
This listing is for an Invernizzi mechanical press, model DTM2, manufactured in 1997. The press has a capacity of 120 tons and features a ram stroke of 110 mm. The machine's ram dimensions are 1700 mm in length and 600 mm in width, providing a substantial working area. The overall height of the press is 3250 mm.
The press is powered by a 15.6 kW engine and operates with a line voltage of 220 volts, along with auxiliary voltages of 110 and 24 volts. It functions under a pressure of 5 atm, with a balancing device pressure range of 2 to 4 atm. The machine is capable of delivering between 30 to 120 strikes per minute.
The mechanical press is primarily white and includes hydraulic and pneumatic components. It is equipped with a yellow safety guard on the side, as well as pressure gauges and a control panel for operational monitoring. The exterior of the machine shows signs of dirt and wear consistent with industrial use, but no major damage is visible.
Additional items visible near the machine include a broom, a wooden box with metal rods, and a red tool cabinet with some stored items. A black cable or hose is coiled and hanging on the front of the press.
This mechanical press is offered as-is and where-is. Potential buyers should consider the condition and inspect the machine accordingly before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 30 |
| Last activity | Nov. 7, 2026 |
Sidicom Group S.R.L. is a leading Italian company specializing in the trade of new and refurbished machinery for the sheet metal and swarf industries. With a strong presence in the market, Sidicom offers a comprehensive range of equipment, including mechanical and hydraulic presses, forming presses, shears, and feeder lines. Their extensive inventory also features a variety of machines such as bending rolls, punching machines, and lifting and handling equipment, catering to diverse industrial needs. Located in Limena, Padua, Sidicom Group S.R.L. operates from a fully equipped facility that ensures meticulous inspection and potential revamping of used machinery, guaranteeing compliance with current regulations. Their commitment to quality is further demonstrated through complete mechanical and electrical retrofitting services, providing clients with equipment that matches the productivity of new machines while offering cost-effective solutions. Beyond machinery sales, Sidicom Group S.R.L. offers a suite of services, including 360° complete consultancy, maintenance, compliance and safety certifications, as well as transport and installation. Their dedicated team of skilled technicians and consultants work closely with clients to identify optimal machinery solutions, ensuring seamless integration and long-term operational efficiency. With a focus on sustainable innovation and customer satisfaction, Sidicom Group S.R.L. stands as a trusted partner for businesses seeking reliable and high-quality machinery solutions in the sheet metal and swarf sectors.
EN
- Languages
English (GB)