| Manufacturer | INNSE |
|---|---|
| Model | FAC 221 |
| Year | 1980 |
| Location | Romania
|
| Category | Borers - floor type boring machines CNC |
| CNC | |
| X travel | 22500 mm |
| Y travel | 6000 mm |
| Z travel | 1500 mm |
| Table length | 5000 mm |
| Table width | 4000 mm |
| Spindle taper | ISO 60 |
| Spindle diameter | 221 mm |
| Overhauled | yes |
| Year of overhauling | 2008 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | dismantled |
| Last availability date | 26/08/2026 |
| Product id | P230427060 |
| Language |
INNSE FAC 221
Desková vyvrtávačka CNC INNSE FAC 221
INNSE FAC 221
INNSE FAC 221 CNC Plattenbohrwerk
INNSE FAC 221
INNSE FAC 221 Floor type boring machine CNC
Mandrinadora CNC INNSE FAC 221
Aléseuse à montant mobile CNC INNSE FAC 221
INNSE FAC 221
INNSE FAC 221
Alesatrice a montante mobile CNC INNSE FAC 221
INNSE FAC 221
INNSE FAC 221
Wytaczarka CNC INNSE FAC 221
INNSE FAC 221
INNSE FAC 221
INNSE FAC 221 Горизонтально-расточной станок с ЧПУ
INNSE FAC 221
INNSE FAC 221
CNC zemin tipi borverk makinesi INNSE FAC 221
|
This offering consists of two INNSE FAC 221 vertical boring machines mounted on the same bed, designed for heavy-duty machining tasks. The machines differ primarily in their Y-axis travel, with one machine providing 5000 mm and the other extending to 6000 mm, while both share a Z-axis boring spindle travel of 1500 mm and an X-axis travel up to 22500 mm. The boring spindle diameter measures 221 mm, featuring an ISO 60 taper. The headstock section dimensions are 1145 x 860 mm, and the main drive motor delivers 100 kW of power with a two-step gearbox, allowing spindle speeds from 2.7 to 600 rpm. Both machines operate with 5 CNC axes controlled by Siemens 840D systems. The setup includes a large slotted metal worktable measuring 4000 x 5000 mm, capable of supporting a maximum load of 200,000 kg evenly distributed over circular hydrostatic guideways. This worktable is equipped with several clamping fixtures to secure workpieces during machining. One machine is equipped to work with a face plate (U axis), while the other can operate with a COLGAR bi-rotary head. Included accessories are a COLGAR bi-rotary head, a universal angular head type TU 16/1, two angular milling heads at 90° type 2TS100/1, an angular milling head with main spindle type TUR 8, a face plate type PST 85/C, and a RENISHAW measuring system. The machines show signs of use, including some dirt and wear marks consistent with an industrial environment. An overhead yellow crane system is installed above the machines to facilitate heavy lifting operations. The machines underwent upgrades in 2004 and 2008, with the year of overhauling recorded as 2008. This robust and versatile machining center is suitable for large-scale boring applications requiring precise CNC control and heavy load capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine.
Boring spindle diameter 221 mm
Boring spindle taper ISO 60
Headstock section 1145 x 860 mm
Power of main drive motor 100 Kw
Gearbox steps 2
Main spindle speed 2,7-600 rpm
Column horizontal travel (X axis) (machine 1) 18000 mm
Column horizontal travel (X axis) (machine 2) 22500 mm
Headstock vertical travel (Y axis) (machine 1) 5000 mm
Headstock vertical travel (Y axis) (machine 2) 6000 mm
Headstock horizontal travel ( W axis) 1500 mm
Boring spindle travel (Z axis) 1500 mm
5 CNC axes – Siemens 840D
Able to work with face plate (U axis) (machine 1)
Able to work with COLGAR bi-rotary head (machine 2)
ROTARY TABLE type PMCF 2500
Table surface 4000 x 5000mm
Table longitudinal travel ( W1 axis) 3000mm
Max. load on the table 200000 Kg
(equally distributed into circular hydrostatic guideways)
ACCESSORIES
COLGAR bi-rotary head 1 piece
Universal angular head type TU 16/1 1 piece
Angular milling head at 90 type 2TS100/1 2 pieces
Angular milling head with main spindle type TUR 8 1 piece
Face plate type PST 85/C 1 piece
RENISHAW measuring system
H101 UPGRADED IN 2004
H102 UPGRADED IN 2008
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machine is the INNSE FAC 221?
This INNSE FAC 221 is a floor type boring machine with CNC capabilities.
When was the INNSE FAC 221 manufactured?
This INNSE FAC 221 was manufactured in 1980.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | Sept. 12, 2026 |
The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine.
Boring spindle diameter 221 mm
Boring spindle taper ISO 60
Headstock section 1145 x 860 mm
Power of main drive motor 100 Kw
Gearbox steps 2
Main spindle speed 2,7-600 rpm
Column horizontal travel (X axis) (machine 1) 18000 mm
Column horizontal travel (X axis) (machine 2) 22500 mm
Headstock vertical travel (Y axis) (machine 1) 5000 mm
Headstock vertical travel (Y axis) (machine 2) 6000 mm
Headstock horizontal travel ( W axis) 1500 mm
Boring spindle travel (Z axis) 1500 mm
5 CNC axes – Siemens 840D
Able to work with face plate (U axis) (machine 1)
Able to work with COLGAR bi-rotary head (machine 2)
ROTARY TABLE type PMCF 2500
Table surface 4000 x 5000mm
Table longitudinal travel ( W1 axis) 3000mm
Max. load on the table 200000 Kg
(equally distributed into circular hydrostatic guideways)
ACCESSORIES
COLGAR bi-rotary head 1 piece
Universal angular head type TU 16/1 1 piece
Angular milling head at 90 type 2TS100/1 2 pieces
Angular milling head with main spindle type TUR 8 1 piece
Face plate type PST 85/C 1 piece
RENISHAW measuring system
H101 UPGRADED IN 2004
H102 UPGRADED IN 2008
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machine is the INNSE FAC 221?
This INNSE FAC 221 is a floor type boring machine with CNC capabilities.
When was the INNSE FAC 221 manufactured?
This INNSE FAC 221 was manufactured in 1980.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Borers - floor type boring machines CNC |
| CNC | |
| X travel | 22500 mm |
| Y travel | 6000 mm |
| Z travel | 1500 mm |
| Table length | 5000 mm |
| Table width | 4000 mm |
| Spindle taper | ISO 60 |
| Spindle diameter | 221 mm |
| Overhauled | yes |
| Year of overhauling | 2008 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | dismantled |
| Last availability date | 26/08/2026 |
| Product id | P230427060 |
| Language |
INNSE FAC 221
Desková vyvrtávačka CNC INNSE FAC 221
INNSE FAC 221
INNSE FAC 221 CNC Plattenbohrwerk
INNSE FAC 221
INNSE FAC 221 Floor type boring machine CNC
Mandrinadora CNC INNSE FAC 221
Aléseuse à montant mobile CNC INNSE FAC 221
INNSE FAC 221
INNSE FAC 221
Alesatrice a montante mobile CNC INNSE FAC 221
INNSE FAC 221
INNSE FAC 221
Wytaczarka CNC INNSE FAC 221
INNSE FAC 221
INNSE FAC 221
INNSE FAC 221 Горизонтально-расточной станок с ЧПУ
INNSE FAC 221
INNSE FAC 221
CNC zemin tipi borverk makinesi INNSE FAC 221
|
This offering consists of two INNSE FAC 221 vertical boring machines mounted on the same bed, designed for heavy-duty machining tasks. The machines differ primarily in their Y-axis travel, with one machine providing 5000 mm and the other extending to 6000 mm, while both share a Z-axis boring spindle travel of 1500 mm and an X-axis travel up to 22500 mm. The boring spindle diameter measures 221 mm, featuring an ISO 60 taper. The headstock section dimensions are 1145 x 860 mm, and the main drive motor delivers 100 kW of power with a two-step gearbox, allowing spindle speeds from 2.7 to 600 rpm. Both machines operate with 5 CNC axes controlled by Siemens 840D systems. The setup includes a large slotted metal worktable measuring 4000 x 5000 mm, capable of supporting a maximum load of 200,000 kg evenly distributed over circular hydrostatic guideways. This worktable is equipped with several clamping fixtures to secure workpieces during machining. One machine is equipped to work with a face plate (U axis), while the other can operate with a COLGAR bi-rotary head. Included accessories are a COLGAR bi-rotary head, a universal angular head type TU 16/1, two angular milling heads at 90° type 2TS100/1, an angular milling head with main spindle type TUR 8, a face plate type PST 85/C, and a RENISHAW measuring system. The machines show signs of use, including some dirt and wear marks consistent with an industrial environment. An overhead yellow crane system is installed above the machines to facilitate heavy lifting operations. The machines underwent upgrades in 2004 and 2008, with the year of overhauling recorded as 2008. This robust and versatile machining center is suitable for large-scale boring applications requiring precise CNC control and heavy load capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | Sept. 12, 2026 |
EN
- Languages
English (GB)