Contact us to receive an offer.
| Manufacturer | Innocenti |
|---|---|
| Model | 250 t |
| Year | |
| Location | Italy
|
| Category | Forging - Mechanical presses |
| Type | H-Frame |
| Power in tons | 250 T |
| Table length | 2750 mm |
| Table width | 1320 mm |
| Ram stroke | 350 mm |
| Engine Power | 38 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Innocenti 250 t |
| Last availability date | 06/11/2026 |
| Product id | P261104188 |
| Language |
Механична преса Innocenti 250 t
Mechanický lis Innocenti 250 t
Innocenti 250 t Mekanisk presse
Innocenti 250 t Mechanische Presse
Μηχανική πρέσα Innocenti 250 t
Innocenti 250 t Mechanical press
Prensa mecánica Innocenti 250 t
Presse mécanique Innocenti 250 t
Mehanička preša Innocenti 250 t
Innocenti 250 t Mechanikus prés
Pressa meccanica Innocenti 250 t
Innocenti 250 t Mechaninis presas
Innocenti 250 t Mechanische pers
Prasa mechaniczna Innocenti 250 t
Prensa mecânica Innocenti 250 t
Presă mecanică Innocenti 250 t
Innocenti 250 t Механический пресс
Mehanička presa Innocenti 250 t
Innocenti 250 t Mekanisk press
Mekanik pres Innocenti 250 t
|
Used INNOCENTI 250 t double-column (H-frame) mechanical press, sold as-is.
The press has a double-column structure, a die-holding table with T-slots, and a slide. Its listed rated capacity is 250 metric tons (approximately 2,450 kN). The table measures 2,750 × 1,320 mm, and the slide measures 2,750 × 1,170 mm. The maximum opening between levels is 1,250 mm, with a slide stroke of 350 mm.
Drive equipment includes a 38 kW main motor rated at 380/660 V, 6-pole, B3 construction; an 11 kW low-speed motor rated at 220/380 V, 4-pole, B3, with self-braking; and a 4 kW slide adjustment motor rated at 220/380 V, 6-pole, B3, with automatic braking.
The listed power supply is 400 V, three-phase, 50 Hz, 80 A. Auxiliary circuits are 24 V AC, and the operating air pressure is 6 bar. The electrical cabinet is identified as a Lanfranco Impianti S.r.l. unit, CE marked, with IP65 protection. Its listed supply is 380 V, three-phase, 50 Hz, 80 A, with a breaking capacity of 40 kA.
Listed safety and control equipment includes a two-hand control panel with an emergency stop, a vertical panel with key-operated selectors and a pressure gauge, and a front perimeter mesh guard. The double-column arrangement is described as providing rigidity and even load distribution, suitable for large dies.
On-site inspection is recommended to assess the machine’s condition and verify its dimensions. Specifications are informational and subject to verification during inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: INNOCENTI
Model: 250 t
Type: Double-column, H-frame mechanical press
Condition: Used, sold as-is
Rated capacity: 250 metric tons (approximately 2,450 kN)
Table dimensions: 2,750 × 1,320 mm
Table: Die-holding table with T-slots
Slide dimensions: 2,750 × 1,170 mm
Maximum opening between levels: 1,250 mm
Slide stroke: 350 mm
Main motor: 38 kW, 380/660 V, 6-pole, B3
Low-speed motor: 11 kW, 220/380 V, 4-pole, B3, self-braking
Slide adjustment motor: 4 kW, 220/380 V, 6-pole, B3, automatic braking
Power supply: 400 V, three-phase, 50 Hz, 80 A
Auxiliary circuits: 24 V AC
Operating air pressure: 6 bar
Electrical cabinet: Lanfranco Impianti S.r.l., CE marked, IP65
Electrical cabinet supply: 380 V, three-phase, 50 Hz, 80 A
Breaking capacity: 40 kA
Visible safety equipment: Two-hand control panel with emergency stop
Additional controls: Vertical panel with key-operated selectors and pressure gauge
Guarding: Front perimeter mesh guard
The double-column structure is designed to provide rigidity and even load distribution, making the press suitable for large dies. On-site inspection is recommended to assess the machine’s condition and verify its dimensions. Specifications are provided for informational purposes and are subject to verification during inspection.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 26 |
| Last activity | Nov. 5, 2026 |
Manufacturer: INNOCENTI
Model: 250 t
Type: Double-column, H-frame mechanical press
Condition: Used, sold as-is
Rated capacity: 250 metric tons (approximately 2,450 kN)
Table dimensions: 2,750 × 1,320 mm
Table: Die-holding table with T-slots
Slide dimensions: 2,750 × 1,170 mm
Maximum opening between levels: 1,250 mm
Slide stroke: 350 mm
Main motor: 38 kW, 380/660 V, 6-pole, B3
Low-speed motor: 11 kW, 220/380 V, 4-pole, B3, self-braking
Slide adjustment motor: 4 kW, 220/380 V, 6-pole, B3, automatic braking
Power supply: 400 V, three-phase, 50 Hz, 80 A
Auxiliary circuits: 24 V AC
Operating air pressure: 6 bar
Electrical cabinet: Lanfranco Impianti S.r.l., CE marked, IP65
Electrical cabinet supply: 380 V, three-phase, 50 Hz, 80 A
Breaking capacity: 40 kA
Visible safety equipment: Two-hand control panel with emergency stop
Additional controls: Vertical panel with key-operated selectors and pressure gauge
Guarding: Front perimeter mesh guard
The double-column structure is designed to provide rigidity and even load distribution, making the press suitable for large dies. On-site inspection is recommended to assess the machine’s condition and verify its dimensions. Specifications are provided for informational purposes and are subject to verification during inspection.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Mechanical presses |
| Type | H-Frame |
| Power in tons | 250 T |
| Table length | 2750 mm |
| Table width | 1320 mm |
| Ram stroke | 350 mm |
| Engine Power | 38 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Innocenti 250 t |
| Last availability date | 06/11/2026 |
| Product id | P261104188 |
| Language |
Механична преса Innocenti 250 t
Mechanický lis Innocenti 250 t
Innocenti 250 t Mekanisk presse
Innocenti 250 t Mechanische Presse
Μηχανική πρέσα Innocenti 250 t
Innocenti 250 t Mechanical press
Prensa mecánica Innocenti 250 t
Presse mécanique Innocenti 250 t
Mehanička preša Innocenti 250 t
Innocenti 250 t Mechanikus prés
Pressa meccanica Innocenti 250 t
Innocenti 250 t Mechaninis presas
Innocenti 250 t Mechanische pers
Prasa mechaniczna Innocenti 250 t
Prensa mecânica Innocenti 250 t
Presă mecanică Innocenti 250 t
Innocenti 250 t Механический пресс
Mehanička presa Innocenti 250 t
Innocenti 250 t Mekanisk press
Mekanik pres Innocenti 250 t
|
Used INNOCENTI 250 t double-column (H-frame) mechanical press, sold as-is.
The press has a double-column structure, a die-holding table with T-slots, and a slide. Its listed rated capacity is 250 metric tons (approximately 2,450 kN). The table measures 2,750 × 1,320 mm, and the slide measures 2,750 × 1,170 mm. The maximum opening between levels is 1,250 mm, with a slide stroke of 350 mm.
Drive equipment includes a 38 kW main motor rated at 380/660 V, 6-pole, B3 construction; an 11 kW low-speed motor rated at 220/380 V, 4-pole, B3, with self-braking; and a 4 kW slide adjustment motor rated at 220/380 V, 6-pole, B3, with automatic braking.
The listed power supply is 400 V, three-phase, 50 Hz, 80 A. Auxiliary circuits are 24 V AC, and the operating air pressure is 6 bar. The electrical cabinet is identified as a Lanfranco Impianti S.r.l. unit, CE marked, with IP65 protection. Its listed supply is 380 V, three-phase, 50 Hz, 80 A, with a breaking capacity of 40 kA.
Listed safety and control equipment includes a two-hand control panel with an emergency stop, a vertical panel with key-operated selectors and a pressure gauge, and a front perimeter mesh guard. The double-column arrangement is described as providing rigidity and even load distribution, suitable for large dies.
On-site inspection is recommended to assess the machine’s condition and verify its dimensions. Specifications are informational and subject to verification during inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 26 |
| Last activity | Nov. 5, 2026 |
EN
- Languages
English (GB)