| Manufacturer | Index |
|---|---|
| Model | MS 22 |
| Year | 2011 |
| Location | Germany
|
Index MS 22 – multi-spindle turning machine (2011) — overview
This listing is for an Index MS 22 multi-spindle turning machine, manufactured in 2011. The machine is a 6-axis turning center equipped with a Siemens Sinumerik 840D powerline control (Index C200-4D) with Dual NCU. A counter spindle is fitted and the machine is specified for bar stock up to 24 mm maximum diameter. Maximum spindle speed is specified as 12,000 rpm.
Control, automation and material handling
- Control: SIEMENS Sinumerik 840D (powerline) with Dual NCU
- Bar loader: IEMCA / SIR MS22 P flat loader, Type 33 (YOM 2011). Loader electrical data: 400 V / 50 Hz, 7 A; specified maximum pressure: 6 bar; mass: 100 kg.
- Material feeders included (sets): Ø12 with reducer tubes, Ø18 with reducer tubes, and Ø24.
Tooling, back-machining and drives
- Tooling attachments listed: 1x polygon turning device; 3x powered tool holders ER11 (gear ratio 1:2, max speed 12,000 rpm); 1x powered tool holder VDI25 (gear ratio 1:1, max speed 6,000 rpm).
- Back-machining unit: mounted on slide 6.3 with 2x powered tool holders and 1x fixed holder (gear ratio 1:2, max speed 12,000 rpm).
- Tooling drive connections: 2 electrical connections on NCU 1 and 3 electrical connections on NCU 2.
Coolant, filtration and optional equipment
- Knoll coolant/filter system (YOM 2011) with: 1x high-pressure pump 80 bar, 24 l/min; 1x high-pressure pump 40 bar, 55 l/min; 1x low-pressure pump 300 l/min at 4 bar.
- Optional equipment noted: fire suppression system; coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage); integrated ARTIS process monitoring system.
Electrical and operating data (as provided)
- Nominal voltage: 400 V; Rated current: 99 A; Rated power: 64 kW; Connected load: 67 kVA; Frequency: 50 Hz; Control voltage: 24 VDC.
- Short circuit current (Icu): 50 kA; Peak current (I2): 3.6 kA; Maximum backup fuse: 100 A.
Recorded time counters (as provided)
- Operating hours: 124,075 h; Hydraulic operation hours: 61,189 h; Operating time: 37,971 h; Production time: 27,865 h.
Notes
All specifications and accessories above are taken from the provided equipment data. No additional condition statements (e.g., tested, refurbished, warranty) are made beyond the documented information.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 6-axis Index MS 22 multi-spindle turning machine was manufactured in 2011. It features a Siemens Sinumerik 840D control system and includes a bar loader system with a maximum pressure of 6 bar. The machine is equipped with a Knoll coolant/filter system and various tooling attachments for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Index MS 22 machine we have for sale. Contact us for further details.- Nominal Voltage: 400 V
- Rated Current (In): 99 A
- Short Circuit Current (Icu): 50 kA
- Peak Current (I2): 3.6 kA
- Maximum Backup Fuse: 100 A
- Rated Power: 64 kW
- Connected Load: 67 kVA
- Frequency: 50 Hz
- Control Voltage: 24 VDC
- Operating Hours: 124,075 h
- Hydraulic Operation Hours: 61,189 h
- Operating Time: 37,971 h
- Production Time: 27,865 h
- Control System: Siemens Sinumerik 840D powerline (Index C200-4D) with Dual NCU
- Bar Loader System: IEMCA / SIR MS22 P flat loader, Type 33 (YOM: 2011, Pressure: 6 bar, Mass: 100 kg, Voltage: 400 V / 50 Hz, Current: 7 A)
- Material Feeders: 1 set Ø12 with reducer tubes, 1 set Ø18 with reducer tubes, 1 set Ø24
- Clamping Heads: Ø9, Ø10, Ø12 – Ø18, Ø20 – Ø22
- Knoll Coolant/Filter System (YOM: 2011): 1x high-pressure pump (80 bar, 24 l/min), 1x high-pressure pump (40 bar, 55 l/min), 1x low-pressure pump (300 l/min at 4 bar)
- Tooling Drive Connections: 2x electrical connections on NCU 1, 3x electrical connections on NCU 2
- Tooling Attachments: 1x polygon turning device, 3x powered tool holders ER11 (i = 1:2, max speed 12,000 rpm), 1x powered tool holder VDI25 (i = 1:1, max speed 6,000 rpm)
- Back-machining Unit: on slide 6.3 (with 2x powered tool holders, 1x fixed holder, i = 1:2, max speed 12,000 rpm)
- Optional Equipment: Fire suppression system, Coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage design), Integrated ARTIS process monitoring system
Control Brand: SIEMENS
Control Model: Sinumerik 840D
Counter Spindle: yes
Max. Bar Diameter: 24 mm
Number of Axes: 6
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2041 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 6-axis Index MS 22 multi-spindle turning machine was manufactured in 2011. It features a Siemens Sinumerik 840D control system and includes a bar loader system with a maximum pressure of 6 bar. The machine is equipped with a Knoll coolant/filter system and various tooling attachments for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Index MS 22 machine we have for sale. Contact us for further details.- Nominal Voltage: 400 V
- Rated Current (In): 99 A
- Short Circuit Current (Icu): 50 kA
- Peak Current (I2): 3.6 kA
- Maximum Backup Fuse: 100 A
- Rated Power: 64 kW
- Connected Load: 67 kVA
- Frequency: 50 Hz
- Control Voltage: 24 VDC
- Operating Hours: 124,075 h
- Hydraulic Operation Hours: 61,189 h
- Operating Time: 37,971 h
- Production Time: 27,865 h
- Control System: Siemens Sinumerik 840D powerline (Index C200-4D) with Dual NCU
- Bar Loader System: IEMCA / SIR MS22 P flat loader, Type 33 (YOM: 2011, Pressure: 6 bar, Mass: 100 kg, Voltage: 400 V / 50 Hz, Current: 7 A)
- Material Feeders: 1 set Ø12 with reducer tubes, 1 set Ø18 with reducer tubes, 1 set Ø24
- Clamping Heads: Ø9, Ø10, Ø12 – Ø18, Ø20 – Ø22
- Knoll Coolant/Filter System (YOM: 2011): 1x high-pressure pump (80 bar, 24 l/min), 1x high-pressure pump (40 bar, 55 l/min), 1x low-pressure pump (300 l/min at 4 bar)
- Tooling Drive Connections: 2x electrical connections on NCU 1, 3x electrical connections on NCU 2
- Tooling Attachments: 1x polygon turning device, 3x powered tool holders ER11 (i = 1:2, max speed 12,000 rpm), 1x powered tool holder VDI25 (i = 1:1, max speed 6,000 rpm)
- Back-machining Unit: on slide 6.3 (with 2x powered tool holders, 1x fixed holder, i = 1:2, max speed 12,000 rpm)
- Optional Equipment: Fire suppression system, Coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage design), Integrated ARTIS process monitoring system
Control Brand: SIEMENS
Control Model: Sinumerik 840D
Counter Spindle: yes
Max. Bar Diameter: 24 mm
Number of Axes: 6
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Index MS 22 – multi-spindle turning machine (2011) — overview
This listing is for an Index MS 22 multi-spindle turning machine, manufactured in 2011. The machine is a 6-axis turning center equipped with a Siemens Sinumerik 840D powerline control (Index C200-4D) with Dual NCU. A counter spindle is fitted and the machine is specified for bar stock up to 24 mm maximum diameter. Maximum spindle speed is specified as 12,000 rpm.
Control, automation and material handling
- Control: SIEMENS Sinumerik 840D (powerline) with Dual NCU
- Bar loader: IEMCA / SIR MS22 P flat loader, Type 33 (YOM 2011). Loader electrical data: 400 V / 50 Hz, 7 A; specified maximum pressure: 6 bar; mass: 100 kg.
- Material feeders included (sets): Ø12 with reducer tubes, Ø18 with reducer tubes, and Ø24.
Tooling, back-machining and drives
- Tooling attachments listed: 1x polygon turning device; 3x powered tool holders ER11 (gear ratio 1:2, max speed 12,000 rpm); 1x powered tool holder VDI25 (gear ratio 1:1, max speed 6,000 rpm).
- Back-machining unit: mounted on slide 6.3 with 2x powered tool holders and 1x fixed holder (gear ratio 1:2, max speed 12,000 rpm).
- Tooling drive connections: 2 electrical connections on NCU 1 and 3 electrical connections on NCU 2.
Coolant, filtration and optional equipment
- Knoll coolant/filter system (YOM 2011) with: 1x high-pressure pump 80 bar, 24 l/min; 1x high-pressure pump 40 bar, 55 l/min; 1x low-pressure pump 300 l/min at 4 bar.
- Optional equipment noted: fire suppression system; coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage); integrated ARTIS process monitoring system.
Electrical and operating data (as provided)
- Nominal voltage: 400 V; Rated current: 99 A; Rated power: 64 kW; Connected load: 67 kVA; Frequency: 50 Hz; Control voltage: 24 VDC.
- Short circuit current (Icu): 50 kA; Peak current (I2): 3.6 kA; Maximum backup fuse: 100 A.
Recorded time counters (as provided)
- Operating hours: 124,075 h; Hydraulic operation hours: 61,189 h; Operating time: 37,971 h; Production time: 27,865 h.
Notes
All specifications and accessories above are taken from the provided equipment data. No additional condition statements (e.g., tested, refurbished, warranty) are made beyond the documented information.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2041 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC многошпинделен струг Index MS 22
CNC vícevřetenový soustruh Index MS 22
Index MS 22 CNC fler-spindel drejebænk
Index MS 22 CNC-Mehrspindel-Drehmaschine
Πολυάξονος τόρνος CNC Index MS 22
Index MS 22 CNC multi-spindle lathe
Torno CNC multihusillo Index MS 22
Tour CNC multibroche Index MS 22
CNC viševreteni tokarski stroj Index MS 22
Index MS 22 CNC többorsós esztergagép
Tornio CNC plurimandrino Index MS 22
Index MS 22 CNC daugiaverpstės tekinimo staklės
Index MS 22 CNC-meerspillige draaibank
Tokarka CNC wielowrzecionowa Index MS 22
Torno CNC multifuso Index MS 22
Strung CNC multiax Index MS 22
Index MS 22 Многошпиндельный токарный станок с ЧПУ
CNC viševreteni strug Index MS 22
Index MS 22 CNC flerspindlig svarv
CNC çok milli torna Index MS 22
EN
- Languages
English (GB)