| Manufacturer | Inciner8 International |
|---|---|
| Model | I8-1000 |
| Year | 2018 |
| Location | Bulgaria
|
The Inciner8 I8-1000 is a hazardous waste incineration plant manufactured by Inciner8 International Ltd., United Kingdom, in 2018. This robust system is designed for the thermal treatment of hazardous and industrial waste, ensuring compliance with stringent European environmental regulations. It features a dual-chamber incinerator equipped with a secondary afterburner and Eco Flam burners, providing a total engine power of 44.0 kW.
The incinerator has a length of 6490 mm, width of 2000 mm, height of 6260 mm, and weighs 21,500 kg. It includes a hydraulic RAM feeder with an automatic loading door and safety interlocks, enabling fully automatic waste loading. The feeding capacity can reach up to 330 kg per batch, automatically adjusted based on waste type.
Combustion occurs at primary temperatures between 800 and 1100 °C and secondary temperatures at or above 850 °C with a residence time of 2 seconds, ensuring complete oxidation of waste. The system operates under a 2 mbar underpressure maintained by an induced draft fan with frequency control. Auxiliary low-NOx diesel burners support two-stage surface-stabilized combustion.
For pollution control, the plant incorporates a three-stage flue-gas cleaning system: a heat exchanger rapidly cools gases below 425 °C, followed by hydrated lime or limestone injection to neutralize acid gases, and a ceramic candle filter for particulate and heavy metal removal. The ceramic filters have automatic reverse-pulse cleaning, achieving particulate emissions below 1 mg/Nm³. The system also prevents de novo dioxin formation by maintaining temperatures above 800 °C and removing chlorine compounds.
Visible components include a waste inlet with an automatic loading system on the right side, a purified smoke outlet on the left, a clean hot air outlet at the heat exchanger section, and an ash outlet. The unit comes with a Continuous Emission Monitoring System (CEMS) measuring multiple parameters such as O₂, CO, NOx, HCl, HF, and particulates, with data output via USB or internet.
The Inciner8 I8-1000 holds CE certification and complies with EU Directives 2006/42/EC, 2014/35/EU, and 2014/30/EU. Emission testing confirms compliance with EU Directive 2000/76/EC. Documentation and certification accompany the system.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hazardous Waste Incineration Plant – Inciner8 I8-1000
Manufacturer: Inciner8 International Ltd., United Kingdom
Condition: Installed, fully operational, complete documentation and CE certification
The Inciner8 I8-1000 is a high-performance system for thermal treatment of hazardous and industrial waste, featuring fully automatic loading, dual-chamber combustion, and an integrated flue-gas cleaning system.
Designed for ease of operation, robust construction, and long service life, the unit ensures full compliance with EU Directive 2000/76/EC and the European Industrial Emissions Directive (IED).
The system guarantees complete oxidation of waste under controlled temperature and residence time, resulting in non-hazardous ash and emissions meeting EU regulatory limits.
• Type: Dual-chamber incinerator with secondary afterburner
• Model: Inciner8 I8-1000 C/W Eco Flam Burners
• Feeding capacity: up to 330 kg per batch (automatically adjusted to waste type)
• Combustion temperatures: Primary 800–1100 °C | Secondary ≥ 850 °C (2 s residence time)
• Loading system: Hydraulic RAM feeder with automatic door and safety interlocks
• Auxiliary fuel: Low-NOx diesel burners (two-stage surface-stabilized combustion)
• Operation mode: Underpressure – 2 mbar (ID fan with frequency control)
• Heat recovery: Air-cooled heat exchanger for waste-heat utilization (up to 400 °C)
Flue-Gas Cleaning System (Pollution Control System – PCS):
Three-stage treatment:
1. Heat exchanger – rapid cooling of flue gases below 425 °C
2. Powder dosing unit – hydrated lime/limestone injection for neutralization of acid gases (HCl, SO₂, HF)
3. Ceramic candle filter – final filtration of particulates, heavy metals, and residual compounds
Key features:
• Ceramic filter candles with automatic reverse-pulse cleaning
• Particulate emissions (PM₁₀ / PM₂.₅) < 1 mg/Nm³
• Integrated system preventing de novo dioxin formation by maintaining temperature > 800 °C and removing chlorine compounds
Continuous Emission Monitoring System (CEMS):
• Measured parameters: O₂, CO, CO₂, NO, NO₂, HCl, HF, TOC, particulates, humidity, pressure, temperature
• Ranges: in accordance with EN 14181 (O₂ 0–25%, CO 0–4000 ppm, etc.)
• Data management: USB / Internet output, software package included
Certification & Compliance:
• CE Declarations of Conformity for the complete system and subsystems (autoloader, ID fan, PCS)
• Manufacturer ISO quality certification
• Complies with EU Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage), 2014/30/EU (EMC)
• Emission testing: QUAL 1 Test Report No. 05/24-01-2019 – confirmed compliance with 2000/76/EC
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of incinerator is this Inciner8 I8-1000?
This Inciner8 I8-1000 is a dual-chamber hazardous waste incinerator.
Does this equipment have a pollution control system?
This equipment includes a pollution control system.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Private person / Without company |
| Active since | 2025 |
| Offers online | 2 |
| Last activity | April 28, 2026 |
Hazardous Waste Incineration Plant – Inciner8 I8-1000
Manufacturer: Inciner8 International Ltd., United Kingdom
Condition: Installed, fully operational, complete documentation and CE certification
The Inciner8 I8-1000 is a high-performance system for thermal treatment of hazardous and industrial waste, featuring fully automatic loading, dual-chamber combustion, and an integrated flue-gas cleaning system.
Designed for ease of operation, robust construction, and long service life, the unit ensures full compliance with EU Directive 2000/76/EC and the European Industrial Emissions Directive (IED).
The system guarantees complete oxidation of waste under controlled temperature and residence time, resulting in non-hazardous ash and emissions meeting EU regulatory limits.
• Type: Dual-chamber incinerator with secondary afterburner
• Model: Inciner8 I8-1000 C/W Eco Flam Burners
• Feeding capacity: up to 330 kg per batch (automatically adjusted to waste type)
• Combustion temperatures: Primary 800–1100 °C | Secondary ≥ 850 °C (2 s residence time)
• Loading system: Hydraulic RAM feeder with automatic door and safety interlocks
• Auxiliary fuel: Low-NOx diesel burners (two-stage surface-stabilized combustion)
• Operation mode: Underpressure – 2 mbar (ID fan with frequency control)
• Heat recovery: Air-cooled heat exchanger for waste-heat utilization (up to 400 °C)
Flue-Gas Cleaning System (Pollution Control System – PCS):
Three-stage treatment:
1. Heat exchanger – rapid cooling of flue gases below 425 °C
2. Powder dosing unit – hydrated lime/limestone injection for neutralization of acid gases (HCl, SO₂, HF)
3. Ceramic candle filter – final filtration of particulates, heavy metals, and residual compounds
Key features:
• Ceramic filter candles with automatic reverse-pulse cleaning
• Particulate emissions (PM₁₀ / PM₂.₅) < 1 mg/Nm³
• Integrated system preventing de novo dioxin formation by maintaining temperature > 800 °C and removing chlorine compounds
Continuous Emission Monitoring System (CEMS):
• Measured parameters: O₂, CO, CO₂, NO, NO₂, HCl, HF, TOC, particulates, humidity, pressure, temperature
• Ranges: in accordance with EN 14181 (O₂ 0–25%, CO 0–4000 ppm, etc.)
• Data management: USB / Internet output, software package included
Certification & Compliance:
• CE Declarations of Conformity for the complete system and subsystems (autoloader, ID fan, PCS)
• Manufacturer ISO quality certification
• Complies with EU Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage), 2014/30/EU (EMC)
• Emission testing: QUAL 1 Test Report No. 05/24-01-2019 – confirmed compliance with 2000/76/EC
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of incinerator is this Inciner8 I8-1000?
This Inciner8 I8-1000 is a dual-chamber hazardous waste incinerator.
Does this equipment have a pollution control system?
This equipment includes a pollution control system.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Inciner8 I8-1000 is a hazardous waste incineration plant manufactured by Inciner8 International Ltd., United Kingdom, in 2018. This robust system is designed for the thermal treatment of hazardous and industrial waste, ensuring compliance with stringent European environmental regulations. It features a dual-chamber incinerator equipped with a secondary afterburner and Eco Flam burners, providing a total engine power of 44.0 kW.
The incinerator has a length of 6490 mm, width of 2000 mm, height of 6260 mm, and weighs 21,500 kg. It includes a hydraulic RAM feeder with an automatic loading door and safety interlocks, enabling fully automatic waste loading. The feeding capacity can reach up to 330 kg per batch, automatically adjusted based on waste type.
Combustion occurs at primary temperatures between 800 and 1100 °C and secondary temperatures at or above 850 °C with a residence time of 2 seconds, ensuring complete oxidation of waste. The system operates under a 2 mbar underpressure maintained by an induced draft fan with frequency control. Auxiliary low-NOx diesel burners support two-stage surface-stabilized combustion.
For pollution control, the plant incorporates a three-stage flue-gas cleaning system: a heat exchanger rapidly cools gases below 425 °C, followed by hydrated lime or limestone injection to neutralize acid gases, and a ceramic candle filter for particulate and heavy metal removal. The ceramic filters have automatic reverse-pulse cleaning, achieving particulate emissions below 1 mg/Nm³. The system also prevents de novo dioxin formation by maintaining temperatures above 800 °C and removing chlorine compounds.
Visible components include a waste inlet with an automatic loading system on the right side, a purified smoke outlet on the left, a clean hot air outlet at the heat exchanger section, and an ash outlet. The unit comes with a Continuous Emission Monitoring System (CEMS) measuring multiple parameters such as O₂, CO, NOx, HCl, HF, and particulates, with data output via USB or internet.
The Inciner8 I8-1000 holds CE certification and complies with EU Directives 2006/42/EC, 2014/35/EU, and 2014/30/EU. Emission testing confirms compliance with EU Directive 2000/76/EC. Documentation and certification accompany the system.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Private person / Without company |
| Active since | 2025 |
| Offers online | 2 |
| Last activity | April 28, 2026 |
Inciner8 I8-1000 Двукамерен инсинератор за опасни отпадъци със система за контрол на замърсяването
Inciner8 I8-1000 Dvoukomorová spalovna nebezpečného odpadu se systémem kontroly znečištění
Inciner8 I8-1000 Forbrændingsanlæg til farligt affald med to kamre og forureningskontrolsystem
Inciner8 I8-1000 Zweikammer-Verbrennungsanlage für gefährliche Abfälle mit Abgasreinigungssystem
Inciner8 I8-1000 Αποτεφρωτήρας επικίνδυνων αποβλήτων διπλού θαλάμου με σύστημα ελέγχου της ρύπανσης
Inciner8 I8-1000 Dual-Chamber Hazardous Waste Incinerator with Pollution Control System
Inciner8 I8-1000 Incinerador de residuos peligrosos de doble cámara con sistema de control de la contaminación
Inciner8 I8-1000 Incinérateur de déchets dangereux à deux chambres avec système de contrôle de la pollution
Inciner8 I8-1000 Dvokomorna spalionica opasnog otpada sa sustavom za kontrolu onečišćenja
Inciner8 I8-1000 kétkamrás veszélyes hulladékégető berendezés szennyezéscsökkentő rendszerrel
Inceneritore di rifiuti pericolosi a doppia camera Inciner8 I8-1000 con sistema di controllo dell'inquinamento
"Inciner8 I8-1000" dviejų kamerų pavojingų atliekų deginimo įrenginys su taršos kontrolės sistema
Inciner8 I8-1000 Verbrandingsoven voor gevaarlijk afval met twee kamers en systeem voor verontreinigingsbeheersing
Inciner8 I8-1000 Dwukomorowa spalarnia odpadów niebezpiecznych z systemem kontroli zanieczyszczeń
Inciner8 I8-1000 Incinerador de resíduos perigosos de câmara dupla com sistema de controlo da poluição
Inciner8 I8-1000 Incinerator cu două camere pentru deșeuri periculoase cu sistem de control al poluării
Inciner8 I8-1000 Двухкамерный инсинератор опасных отходов с системой контроля загрязнения
Inciner8 I8-1000 Dvokomorna spalionica opasnog otpada sa sistemom za kontrolu zagađenja
Inciner8 I8-1000 Förbränningsugn för farligt avfall med dubbla kammare och föroreningskontrollsystem
Inciner8 I8-1000 Kirlilik Kontrol Sistemli Çift Odacıklı Tehlikeli Atık Yakma Fırını
EN
- Languages
English (GB)