Contact us to receive an offer.
| Category | Foundry furnaces |
| Engine Power | 16.2 kW |
| Frequency | 50 Hz |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 07/09/2026 |
| Product id | P230810106 |
| Language |
This listing features an ILVET C-1321 continuous annealing furnace, manufactured in 2011. It is designed for heat treatment processes such as pre-polymerization and annealing. The furnace operates at a frequency of 50 Hz and requires an electrical supply of 380 V at 50 Hz, with a total power consumption of 16.2 kW.
The temperature range of the furnace spans from 1°C up to a maximum of 199°C. The manufacturer recommends an optimal operating temperature between 80°C and 90°C for specific processes. The unit incorporates a Teflon chain conveyor or feed line, facilitating smooth transport of workpieces through the heat treatment zone. The chain width measures 200 mm, while the maximum allowable workpiece width is 150 mm.
The furnace is housed in a large blue industrial casing, featuring a small entrance protected by black rubber flaps to maintain internal conditions. A white electrical control box is mounted on the side of the unit, enabling operational management. Two posters or labels are attached to the side, which may provide additional operational or safety information.
The unit shows minor surface dirt and wear consistent with typical industrial use but no visible damage, indicating it has been maintained in reasonable condition. This equipment is suitable for applications requiring controlled heat treatment with precise temperature regulation and conveyor handling.
Please note that no specific information regarding testing status, refurbishment, or warranty is provided. Interested buyers should consider these factors when evaluating the furnace for their operational needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Continious annealing furnace
temperature min.: 1 °
temperature max.: 199 °
electrics - voltage/frequency: 380 / 50 V/Hz
total power requirement: 16,2 kW
Pre-polymerization tunnel - heat treatment tunnel
Other features:
-Recommended temperature according to the manufacturer 80°C - 90°C
-with Teflon chain conveyor/feed line
- Chain width 200mm
-Max. Workpiece width 150mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 15, 2026 |
Continious annealing furnace
temperature min.: 1 °
temperature max.: 199 °
electrics - voltage/frequency: 380 / 50 V/Hz
total power requirement: 16,2 kW
Pre-polymerization tunnel - heat treatment tunnel
Other features:
-Recommended temperature according to the manufacturer 80°C - 90°C
-with Teflon chain conveyor/feed line
- Chain width 200mm
-Max. Workpiece width 150mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Foundry furnaces |
| Engine Power | 16.2 kW |
| Frequency | 50 Hz |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 07/09/2026 |
| Product id | P230810106 |
| Language |
This listing features an ILVET C-1321 continuous annealing furnace, manufactured in 2011. It is designed for heat treatment processes such as pre-polymerization and annealing. The furnace operates at a frequency of 50 Hz and requires an electrical supply of 380 V at 50 Hz, with a total power consumption of 16.2 kW.
The temperature range of the furnace spans from 1°C up to a maximum of 199°C. The manufacturer recommends an optimal operating temperature between 80°C and 90°C for specific processes. The unit incorporates a Teflon chain conveyor or feed line, facilitating smooth transport of workpieces through the heat treatment zone. The chain width measures 200 mm, while the maximum allowable workpiece width is 150 mm.
The furnace is housed in a large blue industrial casing, featuring a small entrance protected by black rubber flaps to maintain internal conditions. A white electrical control box is mounted on the side of the unit, enabling operational management. Two posters or labels are attached to the side, which may provide additional operational or safety information.
The unit shows minor surface dirt and wear consistent with typical industrial use but no visible damage, indicating it has been maintained in reasonable condition. This equipment is suitable for applications requiring controlled heat treatment with precise temperature regulation and conveyor handling.
Please note that no specific information regarding testing status, refurbishment, or warranty is provided. Interested buyers should consider these factors when evaluating the furnace for their operational needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 15, 2026 |