Contact us to receive an offer.
| Manufacturer | HYUNDAI |
|---|---|
| Model | WIA KH63G |
| Year | 2008 |
| Location | United Kingdom
|
The HYUNDAI WIA KH63G is a robust horizontal palletized machining center manufactured in 2008, designed for heavy-duty industrial use. It features a heavy-duty cast iron construction with hardened and ground box guideways on all axes, ensuring durability and precision. The machine is equipped with a FANUC 18i-MB CNC control system, providing reliable and advanced operational capabilities.
This machining center includes a heavy-duty shuttle pallet exchange system with two pallets, each measuring 630 x 630 mm, capable of handling a maximum part weight of 1000 kg per pallet. The pallet indexing is precise at 1.0 degree, facilitating accurate positioning during machining operations. The machine offers travel dimensions of 950 mm on the X-axis, 825 mm on the Y-axis, and 760 mm on the Z-axis, accommodating a maximum working size of 1,120 mm diameter by 875 mm height.
The spindle is a two-step geared type with a taper #50, delivering a rotation speed of up to 4,500 rpm and a motor power of 18.5 kW. It provides substantial torque of 1,071 Nm in the higher power setting and 901 Nm in the lower. Rapid traverse rates are 20 m/min across all three axes, contributing to efficient machining cycles. The machine also includes a 60-tool automatic tool changer (ATC) with tool change times of 6 seconds for tool-to-tool and 11 seconds for chip-to-chip.
From the images, the machine is installed indoors in a factory environment with adequate lighting. It features two windowed access doors and a control panel with various buttons and a screen on the right side. A blue tool cart with various tools and parts is positioned next to the machine. The exterior shows signs of industrial use with some dirt and wear but no visible major damage. A yellow safety railing surrounds the machine area for operator safety. Additionally, a coolant or chip conveyor system is visible at the rear, along with a coolant or chip collection tank below the conveyor.
The control screen displays the FANUC Series 18i-MB interface along with machine position and modal information for X, Y, Z, and B axes. The run time displayed is approximately 956 hours and 26 minutes, with a total power-on time of over 47,000 hours, indicating extensive operational history. This machining center is well-suited for heavy cutting tasks requiring precision and reliability in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Heavy Duty Cast Iron Construction
Hardened & Ground Box Guideways On All Axes
2 Step Geared Spindle For Heavy Cutting
Heavy Duty Shuttle Pallet Exchange System
FANUC 18i-MB CNC
Pallet Size 2 x 630 x 630 MM
Max. Pallet Load 2 x 1,000 KGS
Max. Working Size 1,120 Dia x 875 H MM
Pallet Indexing 1.0 DEG
Spindle Taper #50
Spindle Speed 4,500 RPM
Spindle Power 22.0 / 18.5 KW
Spindle Torque 1,071 / 901 NM
Spindle Drive 2 STEP GEARED
Travels X/Y/Z 950 / 825 / 760 MM
Dist. Table Top to SP Centre 0 ~ 825 MM
Dist. Table Centre to SP Nose 175 ~ 935 MM
Rapid Traverse Rate - X/Y/Z 20 / 20 / 20 M/MIN
Slideways HARDENED & GROUND BOX GUIDEWAYS
ATC 60
ATC - TT Time 6 SEC
ATC - CC Time 11 SEC
APC - Number of Pallets 2
APC - Exchange Type SHUTTLE EXCHANGE
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 18 |
| Last activity | Oct. 22, 2026 |
Heavy Duty Cast Iron Construction
Hardened & Ground Box Guideways On All Axes
2 Step Geared Spindle For Heavy Cutting
Heavy Duty Shuttle Pallet Exchange System
FANUC 18i-MB CNC
Pallet Size 2 x 630 x 630 MM
Max. Pallet Load 2 x 1,000 KGS
Max. Working Size 1,120 Dia x 875 H MM
Pallet Indexing 1.0 DEG
Spindle Taper #50
Spindle Speed 4,500 RPM
Spindle Power 22.0 / 18.5 KW
Spindle Torque 1,071 / 901 NM
Spindle Drive 2 STEP GEARED
Travels X/Y/Z 950 / 825 / 760 MM
Dist. Table Top to SP Centre 0 ~ 825 MM
Dist. Table Centre to SP Nose 175 ~ 935 MM
Rapid Traverse Rate - X/Y/Z 20 / 20 / 20 M/MIN
Slideways HARDENED & GROUND BOX GUIDEWAYS
ATC 60
ATC - TT Time 6 SEC
ATC - CC Time 11 SEC
APC - Number of Pallets 2
APC - Exchange Type SHUTTLE EXCHANGE
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The HYUNDAI WIA KH63G is a robust horizontal palletized machining center manufactured in 2008, designed for heavy-duty industrial use. It features a heavy-duty cast iron construction with hardened and ground box guideways on all axes, ensuring durability and precision. The machine is equipped with a FANUC 18i-MB CNC control system, providing reliable and advanced operational capabilities.
This machining center includes a heavy-duty shuttle pallet exchange system with two pallets, each measuring 630 x 630 mm, capable of handling a maximum part weight of 1000 kg per pallet. The pallet indexing is precise at 1.0 degree, facilitating accurate positioning during machining operations. The machine offers travel dimensions of 950 mm on the X-axis, 825 mm on the Y-axis, and 760 mm on the Z-axis, accommodating a maximum working size of 1,120 mm diameter by 875 mm height.
The spindle is a two-step geared type with a taper #50, delivering a rotation speed of up to 4,500 rpm and a motor power of 18.5 kW. It provides substantial torque of 1,071 Nm in the higher power setting and 901 Nm in the lower. Rapid traverse rates are 20 m/min across all three axes, contributing to efficient machining cycles. The machine also includes a 60-tool automatic tool changer (ATC) with tool change times of 6 seconds for tool-to-tool and 11 seconds for chip-to-chip.
From the images, the machine is installed indoors in a factory environment with adequate lighting. It features two windowed access doors and a control panel with various buttons and a screen on the right side. A blue tool cart with various tools and parts is positioned next to the machine. The exterior shows signs of industrial use with some dirt and wear but no visible major damage. A yellow safety railing surrounds the machine area for operator safety. Additionally, a coolant or chip conveyor system is visible at the rear, along with a coolant or chip collection tank below the conveyor.
The control screen displays the FANUC Series 18i-MB interface along with machine position and modal information for X, Y, Z, and B axes. The run time displayed is approximately 956 hours and 26 minutes, with a total power-on time of over 47,000 hours, indicating extensive operational history. This machining center is well-suited for heavy cutting tasks requiring precision and reliability in an industrial setting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 18 |
| Last activity | Oct. 22, 2026 |
Палетизиран обработващ център HYUNDAI WIA KH63G
Paletizované obráběcí centrum HYUNDAI WIA KH63G
HYUNDAI WIA KH63G Palleteret bearbejdningscenter
HYUNDAI WIA KH63G Paletten-Bearbeitungszentrum
Παλετοποιημένο κέντρο μηχανουργικής επεξεργασίας HYUNDAI WIA KH63G
HYUNDAI WIA KH63G Palletized machining center
Centro de mecanizado paletizado HYUNDAI WIA KH63G
Centre d’usinage palettisé HYUNDAI WIA KH63G
Paletizirani obradni centar HYUNDAI WIA KH63G
HYUNDAI WIA KH63G Raklapozott megmunkáló központ
Centro di lavoro con cambio pallet HYUNDAI WIA KH63G
Padėklų apdirbimo centras HYUNDAI WIA KH63G
HYUNDAI WIA KH63G Gepalletiseerd bewerkingscentrum
Centrum obróbcze z wymianą palet HYUNDAI WIA KH63G
Centro de maquinação paletizado HYUNDAI WIA KH63G
Centru de prelucrare paletizat HYUNDAI WIA KH63G
HYUNDAI WIA KH63G Высокоточный обрабатывающий центр
Paletizovani obradni centar HYUNDAI WIA KH63G
HYUNDAI WIA KH63G Palleterad bearbetningscentral
Paletli işleme merkezi HYUNDAI WIA KH63G
EN
- Languages
English (GB)