| Manufacturer | Hydmech |
|---|---|
| Model | H10A |
| Year | 2007 |
| Location | USA
|
The Hydmech H10A is a horizontal automatic band saw designed for metal cutting applications. Manufactured in 2007, this machine features a robust construction suitable for handling a maximum workload of up to 5000 lbs. It is equipped with a 10-inch cutting capacity for rectangular, round, and square materials at 90 degrees, making it versatile for various cutting needs.
This band saw includes a power down feed system and a chip conveyor to facilitate efficient operation and material handling. The blade used measures 1-1/4 inches by 12 feet 6 inches with a thickness of .042 inches, and it operates at speeds ranging from 50 to 350 surface feet per minute. Carbide blade guides and a 16-inch diameter blade wheel contribute to precise cutting performance.
The machine incorporates an automatic vise control mounted on linear bearings for secure material clamping and a hydraulic full stroke vise control ensuring consistent pressure. The shuttle stroke ranges from 0 to 24 inches with multi-index capability, allowing for flexible cutting lengths. Hydraulic and blade drive motors are rated at 1 hp and 5 hp respectively, supported by a 4-gallon hydraulic tank and a 15-gallon coolant tank, with a system pressure of 435 psi.
The Hydmech H10A's overall dimensions are approximately 83 inches wide, 68 inches long, and 67 inches high, with a table height of 31 inches and a discharge table length of 10 inches. The machine weighs around 3500 lbs.
From the images, the band saw is in used but good condition with no visible damage. It features a control panel with manual and automatic mode buttons, including blade start/stop and coolant controls, all appearing intact. Safety labels with operator rules are present on the machine, enhancing safe operation. A red hose is attached to the lower left side, which may be part of the coolant or hydraulic system. The machine carries clear branding with the Hydmech logo and model designation H10A, and it was made in Canada as indicated by a nameplate and Canadian flag sticker.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
saws – horizontal
saws
10" Automatic Band Saw
Power Down Feed
Chip Conveyor
Saw in a Box Design
Capacity Rectangular 90 Degrees: 10" x 10"
Capacity Round 90 Degrees: 10"
Capacity Square 90 Degrees: 10" x 10"
Round Capacity 45 Degrees: NA
Rectangle Capacity 45 Degrees: NA
Round Capacity 60 Degrees: NA
Rectangle Capacity 60 Degrees: NA
Table Height: 31"
Maximum Work Load: 5000 lbs
Blade Size: 1-1/4" x 12'6" x .042
Blade Speed: 50-350 sfm
Blade Guides: Carbide
Blade Wheel Diameter: 16"
Guide Arm: AUto (vise Driven) Mounted on linear bearings
Blade Drive Motor: 5 hp
Hydruaulic Drive Motor: 1 hp
Hydraulic Tank Capacity: 4 gallon
Coolant Tank Capacity: 15 gallon
System Pressure: 435 psi
Vise Control: Hydraulic full stroke
Shuttle Stroke: 0-24" single stroke, multi-index capability
Discharge Table: 10"
Machine Weight: 3500 lbs
Overall Dimensions: 83" wide x 68" long x 67" high
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 84 |
| Last activity | June 12, 2026 |
saws – horizontal
saws
10" Automatic Band Saw
Power Down Feed
Chip Conveyor
Saw in a Box Design
Capacity Rectangular 90 Degrees: 10" x 10"
Capacity Round 90 Degrees: 10"
Capacity Square 90 Degrees: 10" x 10"
Round Capacity 45 Degrees: NA
Rectangle Capacity 45 Degrees: NA
Round Capacity 60 Degrees: NA
Rectangle Capacity 60 Degrees: NA
Table Height: 31"
Maximum Work Load: 5000 lbs
Blade Size: 1-1/4" x 12'6" x .042
Blade Speed: 50-350 sfm
Blade Guides: Carbide
Blade Wheel Diameter: 16"
Guide Arm: AUto (vise Driven) Mounted on linear bearings
Blade Drive Motor: 5 hp
Hydruaulic Drive Motor: 1 hp
Hydraulic Tank Capacity: 4 gallon
Coolant Tank Capacity: 15 gallon
System Pressure: 435 psi
Vise Control: Hydraulic full stroke
Shuttle Stroke: 0-24" single stroke, multi-index capability
Discharge Table: 10"
Machine Weight: 3500 lbs
Overall Dimensions: 83" wide x 68" long x 67" high
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Hydmech H10A is a horizontal automatic band saw designed for metal cutting applications. Manufactured in 2007, this machine features a robust construction suitable for handling a maximum workload of up to 5000 lbs. It is equipped with a 10-inch cutting capacity for rectangular, round, and square materials at 90 degrees, making it versatile for various cutting needs.
This band saw includes a power down feed system and a chip conveyor to facilitate efficient operation and material handling. The blade used measures 1-1/4 inches by 12 feet 6 inches with a thickness of .042 inches, and it operates at speeds ranging from 50 to 350 surface feet per minute. Carbide blade guides and a 16-inch diameter blade wheel contribute to precise cutting performance.
The machine incorporates an automatic vise control mounted on linear bearings for secure material clamping and a hydraulic full stroke vise control ensuring consistent pressure. The shuttle stroke ranges from 0 to 24 inches with multi-index capability, allowing for flexible cutting lengths. Hydraulic and blade drive motors are rated at 1 hp and 5 hp respectively, supported by a 4-gallon hydraulic tank and a 15-gallon coolant tank, with a system pressure of 435 psi.
The Hydmech H10A's overall dimensions are approximately 83 inches wide, 68 inches long, and 67 inches high, with a table height of 31 inches and a discharge table length of 10 inches. The machine weighs around 3500 lbs.
From the images, the band saw is in used but good condition with no visible damage. It features a control panel with manual and automatic mode buttons, including blade start/stop and coolant controls, all appearing intact. Safety labels with operator rules are present on the machine, enhancing safe operation. A red hose is attached to the lower left side, which may be part of the coolant or hydraulic system. The machine carries clear branding with the Hydmech logo and model designation H10A, and it was made in Canada as indicated by a nameplate and Canadian flag sticker.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 84 |
| Last activity | June 12, 2026 |
лентов трион за метал Hydmech H10A
Použitá pásová pila na kov Hydmech H10A
Hydmech H10A båndsav til metal
Hydmech H10A Metallsäge - Bandsäge
πριονοκορδέλα για μέταλλο Hydmech H10A
Hydmech H10A band saw for metal
Sierra de cinta para metal Hydmech H10A
Scie à ruban pour métal Hydmech H10A
Tračna pila za metal Hydmech H10A
Hydmech H10A szalagfűrész fémhez
Sega a nastro per metallo usata Hydmech H10A
Hydmech H10A juostinis pjūklas metalui
Hydmech H10A lintzaag voor metaal
Używana piła taśmowa Hydmech H10A
serra de fita para metal Hydmech H10A
ferăstrău cu bandă pentru metal Hydmech H10A
Hydmech H10A Пила по металлу - ленточная пила
tračna testera za metal Hydmech H10A
Hydmech H10A bandsåg för metall
İkinci el metal testere Hydmech H10A
EN
- Languages
English (GB)