| Manufacturer | Husky |
|---|---|
| Model | Hylelectric H1000 RS95/80 |
| Year | 2005 |
| Location | Switzerland
|
Overview
This listing is for a Husky Hylelectric H1000 RS95/80 all‑electric injection moulding machine, manufactured in 2005. The machine is specified with a clamping force of 10,000 kN (1,000 t) and a total platen size of 2,070 x 1,840 mm. It is equipped with an 80 mm screw and an HMI‑reported maximum injection pressure of 2,280 bar (HMI display also shows 2,284.4 bar). A Brink BJ02‑2025 Pro2023 take‑out handling/stacking unit is listed as additional equipment.
Operating information
- Working hours (SAP): 115,857.21 h
- Working hours (physical counter / total): 137,414.83 h
Clamping & mold area
- Clamping force: 10,000 kN (1,000 t)
- Mold installation height (min / max): 900 / 1,300 mm
- Opening stroke (min / max): 1,330 / 2,000 mm (Max stroke shown on HMI: 1,474.8 mm)
- Distance between tie bars (H x V): 1,550 x 1,320 mm
- Tie bar diameter: 240 mm
- Centering hole FS / BS: 200 / 200 mm
- Total platen size: 2,070 x 1,840 mm
Injection unit
- Screw diameter: 80 mm
- Dosier (metering) stroke max: 425 mm
- Max screw speed: 298.0 rpm
- Max shot weight: 1,546 g
- Max injection flow / rate: 2,136.0 cm³
- Screw L/D ratio: 25.0 : 1
- Max injection pressure: 2,280 bar (2,284.4 bar on HMI)
Auxiliaries and control
- Ejector type: Hydraulic; ejector stroke max: 250 mm
- Core pulls pneumatic: 2; core pulls hydraulic: 2
- Air valve quantity: 16
- Water circuits: 25
- Interface for handling (EuroMap): 67
- Software version: 2010.3‑005
Utilities & mechanical data
- Power rating / connection value: 120 kW
- Electrical supply connection: 400 V, 633 A, 50 Hz (3 / N + PE)
- Hydraulic pressure max: 18 MPa (180 bar)
- Oil volume: 1,200 L
- Total machine weight (nameplate): 57,040 kg (57 t)
Notes
The Brink BJ02‑2025 Pro2023 handling/stacking unit is identified as additional equipment. No further condition statements, testing or warranty information is provided in the source description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a maximum injection pressure of 2280 bar. It has a total platen size of 2070 x 1840 mm and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.- Working Hours (SAP): 115,857.21 h
- Working Hours (Physical Counter / Total): 137,414.83 h
- Clamping Force: 10000 kN (1000 t)
- Mold Installation Height min/max: 900 / 1300 mm
- Opening Stroke min/max: 1330 / 2000 mm (Max Stroke on HMI Screen: 1474.8 mm)
- Distance Between Tie Bars (H x V): 1550 x 1320 mm
- Tie Bar Diameter: 240 mm
- Total Platen Size: 2070 x 1840 mm
- Centering Hole FS / BS: 200 / 200 mm
- Ejector Type: Hydraulic
- Ejector Stroke max: 250 mm
- Water Circuits: 25
- Take-out Handling / Stacking Unit: Brink BJ02-2025 Pro2023 (additional equipment)
- Screw Diameter: 80 mm
- Dosier Stroke max: 425 mm
- Max Screw Speed: 298.0 rpm
- Max Shot Weight: 1546 g
- Max Injection Pressure: 2280 bar (2284.4 bar on HMI screen)
- Max Injection Flow / Rate: 2136.0 cm³
- Screw L/D Ratio: 25.0 : 1
- Core Pulls Pneumatic: 2
- Core Pulls Hydraulic: 2
- Air Valve Quantity: 16
- Interface for Handling Euro Map: 67
- Software Version: 2010.3-005
- Power Rating Machine / Connection Value: 120 kW
- Total Machine Weight (Nameplate): 57,040 kg (57 t)
- Electrical Supply Connection: 400 V, 633 A, 50 Hz (3 / N + PE)
- Hydraulic Pressure Max: 18 MPa (180 bar)
- Oil Volume: 1200 L
Clamping Force: 10000 kN
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Oct. 31, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a maximum injection pressure of 2280 bar. It has a total platen size of 2070 x 1840 mm and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.- Working Hours (SAP): 115,857.21 h
- Working Hours (Physical Counter / Total): 137,414.83 h
- Clamping Force: 10000 kN (1000 t)
- Mold Installation Height min/max: 900 / 1300 mm
- Opening Stroke min/max: 1330 / 2000 mm (Max Stroke on HMI Screen: 1474.8 mm)
- Distance Between Tie Bars (H x V): 1550 x 1320 mm
- Tie Bar Diameter: 240 mm
- Total Platen Size: 2070 x 1840 mm
- Centering Hole FS / BS: 200 / 200 mm
- Ejector Type: Hydraulic
- Ejector Stroke max: 250 mm
- Water Circuits: 25
- Take-out Handling / Stacking Unit: Brink BJ02-2025 Pro2023 (additional equipment)
- Screw Diameter: 80 mm
- Dosier Stroke max: 425 mm
- Max Screw Speed: 298.0 rpm
- Max Shot Weight: 1546 g
- Max Injection Pressure: 2280 bar (2284.4 bar on HMI screen)
- Max Injection Flow / Rate: 2136.0 cm³
- Screw L/D Ratio: 25.0 : 1
- Core Pulls Pneumatic: 2
- Core Pulls Hydraulic: 2
- Air Valve Quantity: 16
- Interface for Handling Euro Map: 67
- Software Version: 2010.3-005
- Power Rating Machine / Connection Value: 120 kW
- Total Machine Weight (Nameplate): 57,040 kg (57 t)
- Electrical Supply Connection: 400 V, 633 A, 50 Hz (3 / N + PE)
- Hydraulic Pressure Max: 18 MPa (180 bar)
- Oil Volume: 1200 L
Clamping Force: 10000 kN
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
This listing is for a Husky Hylelectric H1000 RS95/80 all‑electric injection moulding machine, manufactured in 2005. The machine is specified with a clamping force of 10,000 kN (1,000 t) and a total platen size of 2,070 x 1,840 mm. It is equipped with an 80 mm screw and an HMI‑reported maximum injection pressure of 2,280 bar (HMI display also shows 2,284.4 bar). A Brink BJ02‑2025 Pro2023 take‑out handling/stacking unit is listed as additional equipment.
Operating information
- Working hours (SAP): 115,857.21 h
- Working hours (physical counter / total): 137,414.83 h
Clamping & mold area
- Clamping force: 10,000 kN (1,000 t)
- Mold installation height (min / max): 900 / 1,300 mm
- Opening stroke (min / max): 1,330 / 2,000 mm (Max stroke shown on HMI: 1,474.8 mm)
- Distance between tie bars (H x V): 1,550 x 1,320 mm
- Tie bar diameter: 240 mm
- Centering hole FS / BS: 200 / 200 mm
- Total platen size: 2,070 x 1,840 mm
Injection unit
- Screw diameter: 80 mm
- Dosier (metering) stroke max: 425 mm
- Max screw speed: 298.0 rpm
- Max shot weight: 1,546 g
- Max injection flow / rate: 2,136.0 cm³
- Screw L/D ratio: 25.0 : 1
- Max injection pressure: 2,280 bar (2,284.4 bar on HMI)
Auxiliaries and control
- Ejector type: Hydraulic; ejector stroke max: 250 mm
- Core pulls pneumatic: 2; core pulls hydraulic: 2
- Air valve quantity: 16
- Water circuits: 25
- Interface for handling (EuroMap): 67
- Software version: 2010.3‑005
Utilities & mechanical data
- Power rating / connection value: 120 kW
- Electrical supply connection: 400 V, 633 A, 50 Hz (3 / N + PE)
- Hydraulic pressure max: 18 MPa (180 bar)
- Oil volume: 1,200 L
- Total machine weight (nameplate): 57,040 kg (57 t)
Notes
The Brink BJ02‑2025 Pro2023 handling/stacking unit is identified as additional equipment. No further condition statements, testing or warranty information is provided in the source description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Oct. 31, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Електрическа шприцмашина Husky Hylelectric H1000 RS95/80
Elektrický vstřikovací lis Husky Hylelectric H1000 RS95/80
Husky Hylelectric H1000 RS95/80 Elektrisk sprøjtestøbemaskine
Husky Hylelectric H1000 RS95/80 Elektrische Spritzgießmaschine
Ηλεκτρική πρέσα έγχυσης Husky Hylelectric H1000 RS95/80
Husky Hylelectric H1000 RS95/80 Electric injection moulding machine
Inyectora eléctrica Husky Hylelectric H1000 RS95/80
Presse à injecter électrique Husky Hylelectric H1000 RS95/80
Električni stroj za injekcijsko prešanje Husky Hylelectric H1000 RS95/80
Husky Hylelectric H1000 RS95/80 Elektromos fröccsöntőgép
Pressa a iniezione elettrica Husky Hylelectric H1000 RS95/80
Husky Hylelectric H1000 RS95/80 Elektrinės įpurškimo liejimo staklės
Husky Hylelectric H1000 RS95/80 Elektrische spuitgietmachine
Wtryskarka elektryczna Husky Hylelectric H1000 RS95/80
Injetora elétrica Husky Hylelectric H1000 RS95/80
Mașină electrică de injectat Husky Hylelectric H1000 RS95/80
Husky Hylelectric H1000 RS95/80 Электрический термопластавтомат
Električna mašina za injekciono prešanje Husky Hylelectric H1000 RS95/80
Husky Hylelectric H1000 RS95/80 Elektrisk formsprutningsmaskin
Elektrikli enjeksiyon makinesi Husky Hylelectric H1000 RS95/80
EN
- Languages
English (GB)