Contact us to receive an offer.
| Manufacturer | Hurth |
|---|---|
| Model | f31 |
| Year | 1975 |
| Location | Turkey
|
This listing is for a Hurth F31 horizontal gear hobbing machine, manufactured in 1975. The machine has a robust build with dimensions of 2000 mm in length, 2000 mm in width, and 1500 mm in height, weighing approximately 7500 kg. It is designed for cutting gears with a maximum wheel diameter of 300 mm and supports gear modules up to 15.0. The machine features a maximum spindle speed of 1800 rpm and can accommodate gear widths up to 15 mm. It is powered by a 15 kW engine.
The machine has a large industrial structure painted light blue, showing visible wear including paint chipping, scratches, dents, and rust patches, especially near the base, gear mechanism housing, and edges. The gear cutting spindle and associated mechanical components are centrally located and display signs of wear and paint deterioration. An adjustment dial with a scale is present on the left side of the gear mechanism, facilitating precise settings.
On the left side, there is a control panel equipped with multiple buttons and switches, as well as an electrical panel containing various relays, contactors, and wiring. The interior of the control panel appears organized but shows signs of age and use. A yellow flexible hose is attached to the top left side of the machine, and hydraulic or pneumatic hoses are connected at the bottom left on the rear side. Additionally, two cylindrical components protrude from the right side, likely part of the drive or feed system. A large exhaust or output pipe is visible on the lower side of the machine.
A technical diagram or instruction label is affixed to the upper rear panel, providing operational guidance. Overall, the machine exhibits typical signs of long-term industrial use, with visible surface wear and corrosion but intact mechanical and electrical components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hurth f31 Vertical gear hobbing machine
Machine is in good condition
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 44 |
| Last activity | Oct. 29, 2026 |
Hurth f31 Vertical gear hobbing machine
Machine is in good condition
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Hurth F31 horizontal gear hobbing machine, manufactured in 1975. The machine has a robust build with dimensions of 2000 mm in length, 2000 mm in width, and 1500 mm in height, weighing approximately 7500 kg. It is designed for cutting gears with a maximum wheel diameter of 300 mm and supports gear modules up to 15.0. The machine features a maximum spindle speed of 1800 rpm and can accommodate gear widths up to 15 mm. It is powered by a 15 kW engine.
The machine has a large industrial structure painted light blue, showing visible wear including paint chipping, scratches, dents, and rust patches, especially near the base, gear mechanism housing, and edges. The gear cutting spindle and associated mechanical components are centrally located and display signs of wear and paint deterioration. An adjustment dial with a scale is present on the left side of the gear mechanism, facilitating precise settings.
On the left side, there is a control panel equipped with multiple buttons and switches, as well as an electrical panel containing various relays, contactors, and wiring. The interior of the control panel appears organized but shows signs of age and use. A yellow flexible hose is attached to the top left side of the machine, and hydraulic or pneumatic hoses are connected at the bottom left on the rear side. Additionally, two cylindrical components protrude from the right side, likely part of the drive or feed system. A large exhaust or output pipe is visible on the lower side of the machine.
A technical diagram or instruction label is affixed to the upper rear panel, providing operational guidance. Overall, the machine exhibits typical signs of long-term industrial use, with visible surface wear and corrosion but intact mechanical and electrical components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 44 |
| Last activity | Oct. 29, 2026 |
Hurth f31 Вертикална машина за фрезоване на зъбни колела
Hurth f31 Vertikální frézka na ozubení
Hurth f31 lodret gearskæremaskine
Hurth f31 Vertikale Wälzfräsmaschine
Hurth f31 Κατακόρυφη μηχανή εργαλειομηχανής με γρανάζια
Hurth f31 Vertical gear hobbing machine
Talladora vertical Hurth f31
Hurth f31 Machine à tailler les engrenages verticaux
Hurth f31 Vertikalna glodalica za ozubljenje
Hurth f31 függőleges fogaskerékmaró gép
Hurth f31 Dentatrice a creatore verticale
Hurth f31 vertikalios krumpliaračių frezavimo staklės
Hurth f31 verticale trommelmachine
Hurth f31 Pionowa frezarka obwiedniowa do kół zębatych
Hurth f31 Máquina de fresar engrenagens vertical
Hurth f31 Mașină verticală de frezat angrenaje
Вертикальный зубофрезерный станок Hurth f31
Hurth f31 Vertikalna mašina za glodanje zupčanika
Hurth f31 Vertikal kuggfräsmaskin
Hurth f31 Dikey dişli azdırma makinesi
EN
- Languages
English (GB)