Contact us to receive an offer.
| Manufacturer | HÜLLER HILLE |
|---|---|
| Model | BLUESTAR 5 |
| Year | 2007 |
| Location | Switzerland
|
This HÜLLER HILLE BLUESTAR 5 horizontal machining center, manufactured in 2007, features a robust design with overall dimensions of 4000 mm in length, 3000 mm in width, and 3000 mm in height, and weighs approximately 12,500 kg. It is equipped with a 4-axis system, providing longitudinal travel (X-axis) of 700 mm, transversal travel (Y-axis) of 630 mm, and vertical travel (Z-axis) of 700 mm. The machine's table measures 750 mm by 750 mm and supports a maximum part weight of 500 kg. The rotary table offers precise positioning with divisions of 0.001° and a maximum speed of 30 rpm, capable of holding a torque of 4000 Nm and a tilting moment of 8000 Nm. Pallets with dimensions of 500 mm by 500 mm and a weight capacity of 150 kg are changeable in approximately 7 seconds, supporting a transport weight of 500 kg.
The tool changer accommodates up to 40 tools, with a maximum tool diameter of 80 mm (150 mm with free adjacent pockets), tool length of 350 mm, and a maximum tool weight of 10 kg. Tool changing times range from 2.5 to 4.5 seconds, with an average chip-to-chip time of 4 seconds. The spindle features an HSK-A 63 nose and operates steplessly from 1 to 10,000 rpm, powered by a 30 kW spindle motor delivering up to 202 Nm of torque. The feed range is 1 to 50,000 mm/min, with rapid traverse speeds up to 50 m/min and acceleration of 7 m/s². The machine requires a 3-phase 400 V, 50 Hz power supply with 6 bar air connection and consumes approximately 27 kVA.
Included accessories are a direct measuring system, a set of toolholders, a coolant system, a paper filtration system, a chip conveyor, and a rotating viewing window. The machine's exterior is clean with minor wear marks, and the control console features a keypad and screen. A large circular tool magazine with numbered slots is present inside, showing some surface wear. Additional components visible include a rotary or indexing table with mounting holes and a tool cart with multiple tool holders. The interior shows typical signs of use, such as paint wear and surface staining, while the exterior surfaces have some dirt and wear but no visible damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data
Number of axis total 4
Longitudinal travel (X-axis) 700 mm
Transversal travel (y-axis) 630 mm
Vertical travel (z axis) 700 mm
Dimension of the workpice:
Length 750 mm
Width 700 mm
Table load max. 500 kg
Table divisions (B) 0.001 °
Table speed 30 rpm
Holding torque A-axis 4000 Nm
Tilting moment 8000 Nm
Pallets:
Length 500 mm
Width 500 mm
Pallet weight 150 kg
Time of changing palets 7 sec
Transport weight 500 kg
Tool changer:
Number of tools 40
Tool diameter max. 80 mm
Diameter with free adjacent pockets 150 mm
Tool lenght 350 mm
Max. tool-weight 10 kg
Time of tool changing 2.5 - 4.5 sec
Average chip-to-chip time 4 sec
Spindle nose: HSK-A 63
Spindle speeds:
stepless
from 1 rpm
up to 10000 rpm
Feed range 1 - 50000 mm/min
Rapid traverse: 50 m/min
Acceleration 7 m/s
Max. Feed force 5000 N
Air connect 6 bar
Voltage 50 Hz 3x 400 Volt
Spindle power 30 / 18 kW
Torque max. 202 Nm
Total power required 27 kVA
Machine's weight about 12500 kg
Overall dimensions machine:
Length 4000 mm
Width 3000 mm
Height 3000 mm
Various accessories:
Direct measuring system
Set of toolholders
Coolant system
Paper filtration system
Chip conveyor
Rotating viewing window
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 260 |
| Last activity | Nov. 1, 2026 |
Technical data
Number of axis total 4
Longitudinal travel (X-axis) 700 mm
Transversal travel (y-axis) 630 mm
Vertical travel (z axis) 700 mm
Dimension of the workpice:
Length 750 mm
Width 700 mm
Table load max. 500 kg
Table divisions (B) 0.001 °
Table speed 30 rpm
Holding torque A-axis 4000 Nm
Tilting moment 8000 Nm
Pallets:
Length 500 mm
Width 500 mm
Pallet weight 150 kg
Time of changing palets 7 sec
Transport weight 500 kg
Tool changer:
Number of tools 40
Tool diameter max. 80 mm
Diameter with free adjacent pockets 150 mm
Tool lenght 350 mm
Max. tool-weight 10 kg
Time of tool changing 2.5 - 4.5 sec
Average chip-to-chip time 4 sec
Spindle nose: HSK-A 63
Spindle speeds:
stepless
from 1 rpm
up to 10000 rpm
Feed range 1 - 50000 mm/min
Rapid traverse: 50 m/min
Acceleration 7 m/s
Max. Feed force 5000 N
Air connect 6 bar
Voltage 50 Hz 3x 400 Volt
Spindle power 30 / 18 kW
Torque max. 202 Nm
Total power required 27 kVA
Machine's weight about 12500 kg
Overall dimensions machine:
Length 4000 mm
Width 3000 mm
Height 3000 mm
Various accessories:
Direct measuring system
Set of toolholders
Coolant system
Paper filtration system
Chip conveyor
Rotating viewing window
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This HÜLLER HILLE BLUESTAR 5 horizontal machining center, manufactured in 2007, features a robust design with overall dimensions of 4000 mm in length, 3000 mm in width, and 3000 mm in height, and weighs approximately 12,500 kg. It is equipped with a 4-axis system, providing longitudinal travel (X-axis) of 700 mm, transversal travel (Y-axis) of 630 mm, and vertical travel (Z-axis) of 700 mm. The machine's table measures 750 mm by 750 mm and supports a maximum part weight of 500 kg. The rotary table offers precise positioning with divisions of 0.001° and a maximum speed of 30 rpm, capable of holding a torque of 4000 Nm and a tilting moment of 8000 Nm. Pallets with dimensions of 500 mm by 500 mm and a weight capacity of 150 kg are changeable in approximately 7 seconds, supporting a transport weight of 500 kg.
The tool changer accommodates up to 40 tools, with a maximum tool diameter of 80 mm (150 mm with free adjacent pockets), tool length of 350 mm, and a maximum tool weight of 10 kg. Tool changing times range from 2.5 to 4.5 seconds, with an average chip-to-chip time of 4 seconds. The spindle features an HSK-A 63 nose and operates steplessly from 1 to 10,000 rpm, powered by a 30 kW spindle motor delivering up to 202 Nm of torque. The feed range is 1 to 50,000 mm/min, with rapid traverse speeds up to 50 m/min and acceleration of 7 m/s². The machine requires a 3-phase 400 V, 50 Hz power supply with 6 bar air connection and consumes approximately 27 kVA.
Included accessories are a direct measuring system, a set of toolholders, a coolant system, a paper filtration system, a chip conveyor, and a rotating viewing window. The machine's exterior is clean with minor wear marks, and the control console features a keypad and screen. A large circular tool magazine with numbered slots is present inside, showing some surface wear. Additional components visible include a rotary or indexing table with mounting holes and a tool cart with multiple tool holders. The interior shows typical signs of use, such as paint wear and surface staining, while the exterior surfaces have some dirt and wear but no visible damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 260 |
| Last activity | Nov. 1, 2026 |
Обработващ център - хоризонтален HÜLLER HILLE BLUESTAR 5
Obráběcí centrum - horizontální HÜLLER HILLE BLUESTAR 5
HÜLLER HILLE BLUESTAR 5 Bearbejdningscenter - vandret
HÜLLER HILLE BLUESTAR 5 Bearbeitungszentrum Horizontal
Κέντρο κατεργασίας - οριζόντια HÜLLER HILLE BLUESTAR 5
HÜLLER HILLE BLUESTAR 5 Machining center - horizontal
Centro de mecanizado horizontal HÜLLER HILLE BLUESTAR 5
Centre d'usinage horizontal HÜLLER HILLE BLUESTAR 5
Obradni centar - vodoravni HÜLLER HILLE BLUESTAR 5
HÜLLER HILLE BLUESTAR 5 Megmunkáló központ - vízszintes
Centro di lavoro orizzontale HÜLLER HILLE BLUESTAR 5
Apdirbimo centras – horizontalus HÜLLER HILLE BLUESTAR 5
HÜLLER HILLE BLUESTAR 5 Bewerkingscentrum - horizontaal
Centrum obróbcze poziome HÜLLER HILLE BLUESTAR 5
Centro de usinagem - horizontal HÜLLER HILLE BLUESTAR 5
Centru de prelucrare - orizontal HÜLLER HILLE BLUESTAR 5
HÜLLER HILLE BLUESTAR 5 Горизонтальный обрабатывающий центр
Obradni centar - horizontalno HÜLLER HILLE BLUESTAR 5
HÜLLER HILLE BLUESTAR 5 Bearbetningscentrum - horisontellt
Yatay işleme merkezi HÜLLER HILLE BLUESTAR 5
EN
- Languages
English (GB)