Contact us to receive an offer.
| Manufacturer | HUAWIN |
|---|---|
| Model | WM 1560 |
| Year | |
| Location | Switzerland
|
HUAWIN WM 1560 thread milling machine, listed as a worm milling machine and equipped with a SIEMENS control system. The stated specifications describe a machine with a maximum workpiece diameter of 150 mm, a maximum workpiece length of 600 mm, and a maximum module of 5 mm.
The specified milling cutter diameter range is 100–135 mm. Cutter bore sizes are listed as 25.4 mm and 31.75 mm, and the milling cutter speed is 360 rpm. The milling spindle drive power is 4 kW. The workpiece spindle speed is listed as 10 rpm, with maximum torque of 1,200 Nm.
Axis travels are specified as 150 mm on the X axis, 100 mm on the Y axis, and 600 mm on the Z axis. The A axis is listed with rotation of +90° / −35°. These figures describe the stated travel and rotation ranges for the machine.
The required compressed-air connection pressure is 5 bar, and the total power requirement is 20 kVA. Approximate machine weight is 5,000 kg. Overall dimensions are listed as 2,250 mm in length, 2,280 mm in width, and 1,700 mm in height.
This listing presents the machine as a HUAWIN WM 1560 with SIEMENS control for thread and worm milling. No additional accessories or visible condition details are specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: HUAWIN
Model: WM 1560
Machine type: Thread milling machine
Machine subgroup: Worm milling machine
Control system: SIEMENS
Condition: As-is, where-is
Maximum workpiece diameter: 150 mm
Maximum workpiece length: 600 mm
Maximum module: 5 mm
Milling cutter diameter: 100–135 mm
Milling cutter bore: 25.4 / 31.75 mm
Milling cutter speed: 360 rpm
Milling spindle drive power: 4 kW
X-axis travel: 150 mm
Y-axis travel: 100 mm
Z-axis travel: 600 mm
A-axis rotation: +90° / −35°
Workpiece spindle speed: 10 rpm
Maximum torque: 1,200 Nm
Compressed air connection: 5 bar
Total power requirement: 20 kVA
Machine weight: Approximately 5,000 kg
Machine dimensions (L × W × H): 2,250 × 2,280 × 1,700 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 258 |
| Last activity | Nov. 5, 2026 |
Manufacturer: HUAWIN
Model: WM 1560
Machine type: Thread milling machine
Machine subgroup: Worm milling machine
Control system: SIEMENS
Condition: As-is, where-is
Maximum workpiece diameter: 150 mm
Maximum workpiece length: 600 mm
Maximum module: 5 mm
Milling cutter diameter: 100–135 mm
Milling cutter bore: 25.4 / 31.75 mm
Milling cutter speed: 360 rpm
Milling spindle drive power: 4 kW
X-axis travel: 150 mm
Y-axis travel: 100 mm
Z-axis travel: 600 mm
A-axis rotation: +90° / −35°
Workpiece spindle speed: 10 rpm
Maximum torque: 1,200 Nm
Compressed air connection: 5 bar
Total power requirement: 20 kVA
Machine weight: Approximately 5,000 kg
Machine dimensions (L × W × H): 2,250 × 2,280 × 1,700 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
HUAWIN WM 1560 thread milling machine, listed as a worm milling machine and equipped with a SIEMENS control system. The stated specifications describe a machine with a maximum workpiece diameter of 150 mm, a maximum workpiece length of 600 mm, and a maximum module of 5 mm.
The specified milling cutter diameter range is 100–135 mm. Cutter bore sizes are listed as 25.4 mm and 31.75 mm, and the milling cutter speed is 360 rpm. The milling spindle drive power is 4 kW. The workpiece spindle speed is listed as 10 rpm, with maximum torque of 1,200 Nm.
Axis travels are specified as 150 mm on the X axis, 100 mm on the Y axis, and 600 mm on the Z axis. The A axis is listed with rotation of +90° / −35°. These figures describe the stated travel and rotation ranges for the machine.
The required compressed-air connection pressure is 5 bar, and the total power requirement is 20 kVA. Approximate machine weight is 5,000 kg. Overall dimensions are listed as 2,250 mm in length, 2,280 mm in width, and 1,700 mm in height.
This listing presents the machine as a HUAWIN WM 1560 with SIEMENS control for thread and worm milling. No additional accessories or visible condition details are specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 258 |
| Last activity | Nov. 5, 2026 |
Универсална фрезова машина HUAWIN WM 1560
Univerzální frézka HUAWIN WM 1560
HUAWIN WM 1560 Universel fræsemaskine
HUAWIN WM 1560 Universalfräsmaschine
Φρέζα γενικής χρήσης HUAWIN WM 1560
HUAWIN WM 1560 Universal milling machine
Fresadora universal HUAWIN WM 1560
Fraiseuse universelle HUAWIN WM 1560
Univerzalna glodalica HUAWIN WM 1560
HUAWIN WM 1560 Univerzális marógép
Fresatrice universale HUAWIN WM 1560
HUAWIN WM 1560 Universali frezavimo staklė
HUAWIN WM 1560 Universele freesmachine
Frezarka uniwersalna HUAWIN WM 1560
Fresadora universal HUAWIN WM 1560
Mașină de frezat universală HUAWIN WM 1560
HUAWIN WM 1560 Универсальный фрезерный станок
Univerzalna glodalica HUAWIN WM 1560
HUAWIN WM 1560 Universell fräsmaskin
Üniversal freze tezgâhı HUAWIN WM 1560
EN
- Languages
English (GB)