Contact us to receive an offer.
| Category | Case making machines |
| Weight | 1665 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible but unplugged |
| Last availability date | 13/11/2026 |
| Product id | P261112198 |
| Language |
Holvrieka Nirota 15000L stainless-steel tank, manufactured in 1993. The tank has a stated capacity of 15,000 litres and an empty weight of 1,665 kg. Its listed dimensions are 2,500 mm in diameter and 5,500 mm high. The vessel has a conical lower section and is fitted with a Jongia propeller agitator. A hot-water heating element is also listed.
The equipment includes a circular access hatch with a safety cover, a CIP spray ball, and an internal vertical agitator shaft with a multi-blade impeller near the bottom. A pipe or coil runs around the interior near the vessel floor. The top assembly includes a motor and pipework, while additional pipes and fittings are present around the vessel and lower outlet. A section of the outlet assembly is covered by a dark padded insulation jacket. A fixed ladder and handrails are mounted alongside the tank, with guardrails around the top access area.
The exterior and top pipework show streaking, surface marks, and discoloration. Residue, streaking, and discolored patches are also present on the interior walls and floor. The current listing describes the tank as complete with instrumentation and piping connections and states that it is available individually or as part of a set of four identical units.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Holvrieka Nirota stainless steel tank with Jongia mixer and hot water heating element.
Specifications:
- Manufacturer: Holvrieka Nirota (Sneek, Holland)
-
- Year of construction: 1993
- Volume: 15,000 litres
- Empty weight: 1,665 kg
- Dimensions: Ø 2,500 mm x 5,500 mm (height)
- Material: Stainless steel
- Mixer: Jongia (Leeuwarden, Holland) propeller agitator
- Heating: Hot water heating element
- Bottom: Conical
- Top: Manhole with safety cover, CIP spray ball
Tank is in good working condition, complete with instrumentation and piping connections. Available as set of 4 identical units or individually.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 71 |
| Last activity | Nov. 13, 2026 |
Holvrieka Nirota stainless steel tank with Jongia mixer and hot water heating element.
Specifications:
- Manufacturer: Holvrieka Nirota (Sneek, Holland)
-
- Year of construction: 1993
- Volume: 15,000 litres
- Empty weight: 1,665 kg
- Dimensions: Ø 2,500 mm x 5,500 mm (height)
- Material: Stainless steel
- Mixer: Jongia (Leeuwarden, Holland) propeller agitator
- Heating: Hot water heating element
- Bottom: Conical
- Top: Manhole with safety cover, CIP spray ball
Tank is in good working condition, complete with instrumentation and piping connections. Available as set of 4 identical units or individually.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Case making machines |
| Weight | 1665 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible but unplugged |
| Last availability date | 13/11/2026 |
| Product id | P261112198 |
| Language |
Holvrieka Nirota 15000L stainless-steel tank, manufactured in 1993. The tank has a stated capacity of 15,000 litres and an empty weight of 1,665 kg. Its listed dimensions are 2,500 mm in diameter and 5,500 mm high. The vessel has a conical lower section and is fitted with a Jongia propeller agitator. A hot-water heating element is also listed.
The equipment includes a circular access hatch with a safety cover, a CIP spray ball, and an internal vertical agitator shaft with a multi-blade impeller near the bottom. A pipe or coil runs around the interior near the vessel floor. The top assembly includes a motor and pipework, while additional pipes and fittings are present around the vessel and lower outlet. A section of the outlet assembly is covered by a dark padded insulation jacket. A fixed ladder and handrails are mounted alongside the tank, with guardrails around the top access area.
The exterior and top pipework show streaking, surface marks, and discoloration. Residue, streaking, and discolored patches are also present on the interior walls and floor. The current listing describes the tank as complete with instrumentation and piping connections and states that it is available individually or as part of a set of four identical units.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 71 |
| Last activity | Nov. 13, 2026 |