Contact us to receive an offer.
| Category | EDM (Electrical Discharge Machining) - Wire cutting EDM machines |
| X Axis | 500 mm |
| Y Axis | 350 mm |
| Max. workpiece length | 700 mm |
| Max. workpiece width | 500 mm |
| Max. workpiece height | 210 mm |
| CNC Type | |
| Weight | 2400 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 17/09/2026 |
| Product id | P240620027 |
| Language |
This listing is for a HITACHI wire EDM machine, model H-CUT 355RS. The machine is designed for precise wire electrical discharge machining with maximum workpiece dimensions of 700 mm in length, 500 mm in width, and 210 mm in height. It can accommodate workpieces weighing up to 600 kg. The machine features travel distances of 500 mm along the X axis and 350 mm along the Y axis, with additional shifts available in the U and V axes of ±30 mm. The maximum feed speed for the X and Y axes is 1500 mm/min. It uses a standard wire diameter of 0.25 mm, with wire speeds adjustable between 20 and 300 mm/sec, and wire tension ranging from 2 to 27 N. The machine supports a maximum tilt angle from ±12 to 100 degrees. The total weight of the machine is approximately 2400 kg.
The unit shows signs of use, including dust and some surface stains, and part of it is covered with a plastic sheet. A handheld control panel is attached to the right side of the machine, providing operational control. Notably, there is a sign on the machine indicating it is currently out of operation due to a failure ("Urządzenie wyłączone z eksploatacji Awaria"). Potential buyers should consider this status when evaluating the machine. No information is provided regarding the year of manufacture or operational testing, so these aspects remain unspecified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
HITACHI wire EDM machine; H-CUT 355RS
Max dimensions of the processed part - 700x 500x 210mm
Max weight of the processed part 600 kg
Travels in the X/Y axes: 500 x 350 mm
Shifts in the U/V axes +/- 30mm
Max feed speed of the X/Y axis 1500mm/min
Wire diameter - standard fi 0.25
Wire speed 20 to 300mm/sec
Wire tension 2 to 27 N
Max tilt angle (standard) +/-12 to 100
Machine weight: 2400kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 16 |
| Last activity | Nov. 19, 2026 |
HITACHI wire EDM machine; H-CUT 355RS
Max dimensions of the processed part - 700x 500x 210mm
Max weight of the processed part 600 kg
Travels in the X/Y axes: 500 x 350 mm
Shifts in the U/V axes +/- 30mm
Max feed speed of the X/Y axis 1500mm/min
Wire diameter - standard fi 0.25
Wire speed 20 to 300mm/sec
Wire tension 2 to 27 N
Max tilt angle (standard) +/-12 to 100
Machine weight: 2400kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | EDM (Electrical Discharge Machining) - Wire cutting EDM machines |
| X Axis | 500 mm |
| Y Axis | 350 mm |
| Max. workpiece length | 700 mm |
| Max. workpiece width | 500 mm |
| Max. workpiece height | 210 mm |
| CNC Type | |
| Weight | 2400 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 17/09/2026 |
| Product id | P240620027 |
| Language |
This listing is for a HITACHI wire EDM machine, model H-CUT 355RS. The machine is designed for precise wire electrical discharge machining with maximum workpiece dimensions of 700 mm in length, 500 mm in width, and 210 mm in height. It can accommodate workpieces weighing up to 600 kg. The machine features travel distances of 500 mm along the X axis and 350 mm along the Y axis, with additional shifts available in the U and V axes of ±30 mm. The maximum feed speed for the X and Y axes is 1500 mm/min. It uses a standard wire diameter of 0.25 mm, with wire speeds adjustable between 20 and 300 mm/sec, and wire tension ranging from 2 to 27 N. The machine supports a maximum tilt angle from ±12 to 100 degrees. The total weight of the machine is approximately 2400 kg.
The unit shows signs of use, including dust and some surface stains, and part of it is covered with a plastic sheet. A handheld control panel is attached to the right side of the machine, providing operational control. Notably, there is a sign on the machine indicating it is currently out of operation due to a failure ("Urządzenie wyłączone z eksploatacji Awaria"). Potential buyers should consider this status when evaluating the machine. No information is provided regarding the year of manufacture or operational testing, so these aspects remain unspecified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 16 |
| Last activity | Nov. 19, 2026 |