| Manufacturer | HIM HWAIL PRESS |
|---|---|
| Model | HCDS-400 |
| Year | 2011 |
| Location | Hungary
|
HIM HWAIL PRESS HCDS-400 mechanical stamping press, manufactured in 2011. The press has a stated capacity of 400 tons and a stroke length of 280 mm. Its listed operating rate is 35 strokes per minute, with a rated tonnage point 7 mm above B.D.C. The open working area includes a lower bolster/table. Control panels are mounted on both sides of the machine, and yellow-and-black hazard striping runs along the front edge of the orange moving section.
The slide area measures 2600 × 1100 mm, and the bolster area measures 2700 × 1200 mm. The die height is 550 mm, slide adjustment is 120 mm, and bolster thickness is 230 mm. Listed working height is 1200 mm, with a side opening of 1100 × 700 mm. The machine also includes a die cushion rated at 16 × 2 tons, with a 130 mm stroke and a pad area of 1400 × 650 mm. The listed main motor configuration is AC 37 kW × 4 / VS 45 kW × 4, and the slide adjustment motor is 2.2 kW × 4. Required air pressure is listed as 5 kg/cm².
Overall dimensions are 3550 mm long, 2850 mm wide and 4800 mm high. Listed weight is 68,000 kg. Visible dirt, scuffs and discoloration are present on the frame and work area. The description does not establish operating condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details.Press capacity: 400 ton
Rated tonnage point above B.D.C.: 7 mm
Strokes per minute: 35 SPM
Stroke length: 280 mm
Die height: 550 mm
Slide adjustment: 120 mm
Slide area (L x W): 2600 x 1100 mm
Bolster area (L x W): 2700 x 1200 mm
Bolster thickness: 230 mm
Working height: 1200 mm
Side opening: 1100 x 700 mm
Main motor: AC 37 kW x 4 / VS 45 kW x 4
Slide adjustment motor: 2.2 kW x 4
Required air pressure: 5 kg/cm²
Die cushion capacity: 16 x 2 ton
Die cushion stroke: 130 mm
Pad area (L x W): 1400 x 650 mm
Machine Height: 4800 mm
Machine Length: 3550 mm
Machine Weight: 68000 kg
Machine Width: 2850 mm
Max. Stroke: 280 mm
Stamping Force: 4000 Kn
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details.Press capacity: 400 ton
Rated tonnage point above B.D.C.: 7 mm
Strokes per minute: 35 SPM
Stroke length: 280 mm
Die height: 550 mm
Slide adjustment: 120 mm
Slide area (L x W): 2600 x 1100 mm
Bolster area (L x W): 2700 x 1200 mm
Bolster thickness: 230 mm
Working height: 1200 mm
Side opening: 1100 x 700 mm
Main motor: AC 37 kW x 4 / VS 45 kW x 4
Slide adjustment motor: 2.2 kW x 4
Required air pressure: 5 kg/cm²
Die cushion capacity: 16 x 2 ton
Die cushion stroke: 130 mm
Pad area (L x W): 1400 x 650 mm
Machine Height: 4800 mm
Machine Length: 3550 mm
Machine Weight: 68000 kg
Machine Width: 2850 mm
Max. Stroke: 280 mm
Stamping Force: 4000 Kn
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
HIM HWAIL PRESS HCDS-400 mechanical stamping press, manufactured in 2011. The press has a stated capacity of 400 tons and a stroke length of 280 mm. Its listed operating rate is 35 strokes per minute, with a rated tonnage point 7 mm above B.D.C. The open working area includes a lower bolster/table. Control panels are mounted on both sides of the machine, and yellow-and-black hazard striping runs along the front edge of the orange moving section.
The slide area measures 2600 × 1100 mm, and the bolster area measures 2700 × 1200 mm. The die height is 550 mm, slide adjustment is 120 mm, and bolster thickness is 230 mm. Listed working height is 1200 mm, with a side opening of 1100 × 700 mm. The machine also includes a die cushion rated at 16 × 2 tons, with a 130 mm stroke and a pad area of 1400 × 650 mm. The listed main motor configuration is AC 37 kW × 4 / VS 45 kW × 4, and the slide adjustment motor is 2.2 kW × 4. Required air pressure is listed as 5 kg/cm².
Overall dimensions are 3550 mm long, 2850 mm wide and 4800 mm high. Listed weight is 68,000 kg. Visible dirt, scuffs and discoloration are present on the frame and work area. The description does not establish operating condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC абкант преса HIM HWAIL PRESS HCDS-400
CNC ohraňovací lis HIM HWAIL PRESS HCDS-400
HIM HWAIL PRESS HCDS-400 CNC-kantpresse
HIM HWAIL PRESS HCDS-400 CNC-Abkantpresse
CNC στραντζόπρεσα HIM HWAIL PRESS HCDS-400
HIM HWAIL PRESS HCDS-400 CNC press brake
Prensa plegadora CNC HIM HWAIL PRESS HCDS-400
Presse plieuse CNC HIM HWAIL PRESS HCDS-400
CNC abkant preša HIM HWAIL PRESS HCDS-400
HIM HWAIL PRESS HCDS-400 CNC él-hajlító prés
Piegatrice CNC HIM HWAIL PRESS HCDS-400
HIM HWAIL PRESS HCDS-400 CNC lenkimo presas
HIM HWAIL PRESS HCDS-400 CNC-kantpers
Prasa krawędziowa CNC HIM HWAIL PRESS HCDS-400
Prensa dobradeira CNC HIM HWAIL PRESS HCDS-400
Presă abkant CNC HIM HWAIL PRESS HCDS-400
HIM HWAIL PRESS HCDS-400 Листогибочный пресс с ЧПУ
CNC abkant presa HIM HWAIL PRESS HCDS-400
HIM HWAIL PRESS HCDS-400 CNC-kantpress
CNC abkant pres HIM HWAIL PRESS HCDS-400
EN
- Languages
English (GB)