| Manufacturer | HERMLE |
|---|---|
| Model | C 42 U |
| Year | 2014 |
| Location | Switzerland
|
This offering includes two HERMLE C 42 U 5-axis machining centers, both manufactured in 2014. Each machine is equipped with a KUKA loading robot, enhancing automation and workflow efficiency. The machines feature a 5-axis configuration with a circular table diameter of 440 mm and five T-channels measuring 14H7 mm in width, capable of supporting a maximum table load of 450 kg. The travel ranges are 800 mm longitudinally (X-axis), 800 mm transversally (Y-axis), and 550 mm vertically (Z-axis), with a swivel angle of ±130° on the A-axis and a maximum table speed of 30 rpm.
Both machining centers have extensive pallet and tool handling capabilities, including a pallet changing device with 30 pallets sized 400 x 400 mm, and a combined tool magazine capacity of 202 tool places (42 plus an additional 160). The spindles utilize HSK-A 63 noses, with stepless speeds from 0 up to 18,000 rpm, delivering 42 kW of power and a maximum torque of 148 Nm.
Rapid traverse speeds reach up to 45 m/min on the X and Y axes and 40 m/min on the Z axis. The machines require a 6 bar air supply and operate on a 50 Hz, 3-phase 400 Volt electrical system with a total power requirement of 37 kVA. Each machine weighs approximately 12,500 kg, with overall dimensions of 16,000 mm in length, 7,000 mm in width, and 3,500 mm in height.
Additional features include a coolant-through-spindle system rated at 80 bar, air blast through the milling spindle, paper filter facility, Renishaw measuring feeler gauge, BLUM workpiece measurement and tool break control systems, chip conveyor, NC rotary and swiveling table, oil mist extractor, rotating viewing window, and automatic sliding door. Communication interfaces include Serial Port RS 232, Ethernet, and USB. The machines are housed in switch cabinets equipped with air conditioning.
Regarding spindle maintenance, Machine 1 had its spindle replaced in May 2023 at 36,000 hours and currently has approximately 27,000 hours. Machine 2's spindle was replaced in April 2018 at 19,000 hours and currently has about 5,000 hours. These machining centers are designed for precision and efficiency, suitable for a wide range of complex machining applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
2 machines C42U including loading robot
Spindle replacement on Machine 1 in May 2023 at 36,000 hours -> currently approx. 27,000 hours
Spindle replacement on Machine 2 in April 2018 at 19,000 hours -> currently approx. 5,000 hours
**Manufacturer:** HERMLE
**Model:** C 42 U
**Year of Manufacture:** 2014
**Technical Condition:** Good
**Technical Data:**
- Number of Axes: 5
- Circular Table Diameter: 440 mm
- Number of T-Channels: 5
- T-Channel Width: 14H7 mm
- Maximum Table Load: 450 kg
- Longitudinal Travel (X-axis): 800 mm
- Transversal Travel (Y-axis): 800 mm
- Vertical Travel (Z-axis): 550 mm
- Swivel Angle (A-axis): +/-130 °
- Table Speed: 30 rpm
**Pallets and Tool Magazine:**
- Pallet Changing Device: 30
- Pallet Length: 400 mm
- Pallet Width: 400 mm
- Tool Magazine Number of Tool Places: 42 + 160
**Spindle Specifications:**
- Spindle Nose: HSK-A 63
- Spindle Speeds: Stepless from 0 rpm up to 18000 rpm
- Spindle Power: 42 kW
- Maximum Torque: 148 Nm
**Rapid Traverse:**
- Longitudinal: 45 m/min
- Transversal: 45 m/min
- Vertical: 40 m/min
**Air and Electrical Specifications:**
- Air Connect: 6 bar
- Voltage: 50 Hz, 3x 400 Volt
- Total Power Required: 37 kVA
**Machine Weight and Dimensions:**
- Weight: Approximately 12500 kg
- Overall Dimensions:
- Length: 16000 mm
- Width: 7000 mm
- Height: 3500 mm
**Various Accessories:**
- Added Tool-Holder Magazine: Number of Tool Places 160
- Pallet Station: Number of Spaces 54
- Loading Robot: KUKA
- Coolant Through Spindle (CTS): 80 bar
- Air Blast Through Milling Spindle
- Paper Filter Facility
- Measuring Feeler Gauge: Renishaw
- Workpiece Measurement: BLUM
- Tool Break Control: BLUM
- Chip Conveyor
- NC Rotary and Swiveling Table
- Oil Mist Extractor
- Rotating Viewing Window
- Automatic Sliding Door
- Interface: Serial Port RS 232
- Interface: Ethernet
- Interface: USB
- Switch Cabinet
- Air Conditioner
This HERMLE C 42 U machining center is designed for precision and efficiency, making it an excellent choice for various machining applications.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this HERMLE C 42 U machining center manufactured?
This HERMLE C 42 U machining center was manufactured in 2014.
How many hours has this HERMLE C 42 U machining center operated?
This HERMLE C 42 U machining center has operated for 5000 hours.
What is the condition of the machine?
This machining center is in very good condition.
What type of machining center is this HERMLE C 42 U?
This HERMLE C 42 U is a 5-axis machining center.
What year was this equipment manufactured?
This equipment was manufactured in 2014.
What type of machining center is this HERMLE C 42 U?
This HERMLE C 42 U is a 5-axis machining center.
When was this HERMLE C 42 U manufactured?
This HERMLE C 42 U was manufactured in 2014.
What type of machine is this HERMLE C 42 U?
This HERMLE C 42 U machining center is a 5-axis machine.
What year was this equipment manufactured?
This equipment was manufactured in 2014.
How many HERMLE C 42 machines are included in the line?
This machine is part of a complete line of 2 HERMLE C 42 machines with a robot.
What type of machining center is this HERMLE C 42 U?
This HERMLE C 42 U is a 5-axis machining center.
What year was this equipment manufactured?
This equipment was manufactured in 2014.
What type of model is this HERMLE C 42 U machining center?
This HERMLE C 42 U machining center is a 5-axis model.
What year was this equipment manufactured?
This equipment was manufactured in 2014.
When was the spindle last replaced?
This HERMLE C 42 U machine has a spindle that was replaced in May 2023 and currently has approximately 27,000 hours of operation.
When was the spindle last replaced?
This HERMLE C 42 U machine has a spindle that was replaced in April 2018 and currently has approximately 5,000 hours of operation.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 259 |
| Last activity | Nov. 7, 2026 |
2 machines C42U including loading robot
Spindle replacement on Machine 1 in May 2023 at 36,000 hours -> currently approx. 27,000 hours
Spindle replacement on Machine 2 in April 2018 at 19,000 hours -> currently approx. 5,000 hours
**Manufacturer:** HERMLE
**Model:** C 42 U
**Year of Manufacture:** 2014
**Technical Condition:** Good
**Technical Data:**
- Number of Axes: 5
- Circular Table Diameter: 440 mm
- Number of T-Channels: 5
- T-Channel Width: 14H7 mm
- Maximum Table Load: 450 kg
- Longitudinal Travel (X-axis): 800 mm
- Transversal Travel (Y-axis): 800 mm
- Vertical Travel (Z-axis): 550 mm
- Swivel Angle (A-axis): +/-130 °
- Table Speed: 30 rpm
**Pallets and Tool Magazine:**
- Pallet Changing Device: 30
- Pallet Length: 400 mm
- Pallet Width: 400 mm
- Tool Magazine Number of Tool Places: 42 + 160
**Spindle Specifications:**
- Spindle Nose: HSK-A 63
- Spindle Speeds: Stepless from 0 rpm up to 18000 rpm
- Spindle Power: 42 kW
- Maximum Torque: 148 Nm
**Rapid Traverse:**
- Longitudinal: 45 m/min
- Transversal: 45 m/min
- Vertical: 40 m/min
**Air and Electrical Specifications:**
- Air Connect: 6 bar
- Voltage: 50 Hz, 3x 400 Volt
- Total Power Required: 37 kVA
**Machine Weight and Dimensions:**
- Weight: Approximately 12500 kg
- Overall Dimensions:
- Length: 16000 mm
- Width: 7000 mm
- Height: 3500 mm
**Various Accessories:**
- Added Tool-Holder Magazine: Number of Tool Places 160
- Pallet Station: Number of Spaces 54
- Loading Robot: KUKA
- Coolant Through Spindle (CTS): 80 bar
- Air Blast Through Milling Spindle
- Paper Filter Facility
- Measuring Feeler Gauge: Renishaw
- Workpiece Measurement: BLUM
- Tool Break Control: BLUM
- Chip Conveyor
- NC Rotary and Swiveling Table
- Oil Mist Extractor
- Rotating Viewing Window
- Automatic Sliding Door
- Interface: Serial Port RS 232
- Interface: Ethernet
- Interface: USB
- Switch Cabinet
- Air Conditioner
This HERMLE C 42 U machining center is designed for precision and efficiency, making it an excellent choice for various machining applications.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this HERMLE C 42 U machining center manufactured?
This HERMLE C 42 U machining center was manufactured in 2014.
How many hours has this HERMLE C 42 U machining center operated?
This HERMLE C 42 U machining center has operated for 5000 hours.
What is the condition of the machine?
This machining center is in very good condition.
What type of machining center is this HERMLE C 42 U?
This HERMLE C 42 U is a 5-axis machining center.
What year was this equipment manufactured?
This equipment was manufactured in 2014.
What type of machining center is this HERMLE C 42 U?
This HERMLE C 42 U is a 5-axis machining center.
When was this HERMLE C 42 U manufactured?
This HERMLE C 42 U was manufactured in 2014.
What type of machine is this HERMLE C 42 U?
This HERMLE C 42 U machining center is a 5-axis machine.
What year was this equipment manufactured?
This equipment was manufactured in 2014.
How many HERMLE C 42 machines are included in the line?
This machine is part of a complete line of 2 HERMLE C 42 machines with a robot.
What type of machining center is this HERMLE C 42 U?
This HERMLE C 42 U is a 5-axis machining center.
What year was this equipment manufactured?
This equipment was manufactured in 2014.
What type of model is this HERMLE C 42 U machining center?
This HERMLE C 42 U machining center is a 5-axis model.
What year was this equipment manufactured?
This equipment was manufactured in 2014.
When was the spindle last replaced?
This HERMLE C 42 U machine has a spindle that was replaced in May 2023 and currently has approximately 27,000 hours of operation.
When was the spindle last replaced?
This HERMLE C 42 U machine has a spindle that was replaced in April 2018 and currently has approximately 5,000 hours of operation.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This offering includes two HERMLE C 42 U 5-axis machining centers, both manufactured in 2014. Each machine is equipped with a KUKA loading robot, enhancing automation and workflow efficiency. The machines feature a 5-axis configuration with a circular table diameter of 440 mm and five T-channels measuring 14H7 mm in width, capable of supporting a maximum table load of 450 kg. The travel ranges are 800 mm longitudinally (X-axis), 800 mm transversally (Y-axis), and 550 mm vertically (Z-axis), with a swivel angle of ±130° on the A-axis and a maximum table speed of 30 rpm.
Both machining centers have extensive pallet and tool handling capabilities, including a pallet changing device with 30 pallets sized 400 x 400 mm, and a combined tool magazine capacity of 202 tool places (42 plus an additional 160). The spindles utilize HSK-A 63 noses, with stepless speeds from 0 up to 18,000 rpm, delivering 42 kW of power and a maximum torque of 148 Nm.
Rapid traverse speeds reach up to 45 m/min on the X and Y axes and 40 m/min on the Z axis. The machines require a 6 bar air supply and operate on a 50 Hz, 3-phase 400 Volt electrical system with a total power requirement of 37 kVA. Each machine weighs approximately 12,500 kg, with overall dimensions of 16,000 mm in length, 7,000 mm in width, and 3,500 mm in height.
Additional features include a coolant-through-spindle system rated at 80 bar, air blast through the milling spindle, paper filter facility, Renishaw measuring feeler gauge, BLUM workpiece measurement and tool break control systems, chip conveyor, NC rotary and swiveling table, oil mist extractor, rotating viewing window, and automatic sliding door. Communication interfaces include Serial Port RS 232, Ethernet, and USB. The machines are housed in switch cabinets equipped with air conditioning.
Regarding spindle maintenance, Machine 1 had its spindle replaced in May 2023 at 36,000 hours and currently has approximately 27,000 hours. Machine 2's spindle was replaced in April 2018 at 19,000 hours and currently has about 5,000 hours. These machining centers are designed for precision and efficiency, suitable for a wide range of complex machining applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 259 |
| Last activity | Nov. 7, 2026 |
Обработващ център - 5 ос HERMLE C 42 U
Obráběcí centrum - 5 osé HERMLE C 42 U
HERMLE C 42 U Bearbejdningscenter - 5 akset
HERMLE C 42 U Bearbeitungszentrum 5-Achsen
Κέντρο μηχανικής κατεργασίας - 5 άξονες HERMLE C 42 U
HERMLE C 42 U Machining center - 5 axis
Centro de mecanizado 5 ejes HERMLE C 42 U
Centre d'usinage 5 axes HERMLE C 42 U
Obradni centar - 5 osi HERMLE C 42 U
HERMLE C 42 U Megmunkáló központ - 5 tengely
Centro di lavoro 5 assi HERMLE C 42 U
Apdirbimo centras – 5 ašių HERMLE C 42 U
HERMLE C 42 U Bewerkingscentrum - 5 assen
Centrum obróbcze 5osi HERMLE C 42 U
Centro de usinagem - 5 eixos HERMLE C 42 U
Centru de prelucrare - 5 axe HERMLE C 42 U
HERMLE C 42 U 5-осевой обрабатывающий центр
Obradni centar - 5 os HERMLE C 42 U
HERMLE C 42 U Bearbetningscentrum - 5-axligt
5 eksenli işleme merkezi HERMLE C 42 U
EN
- Languages
English (GB)