| Manufacturer | Heller |
|---|---|
| Model | FST-MC-160/800/E |
| Year | 1999 |
| Location | Germany
|
The Heller FST-MC-160/800/E is a 5-axis CNC controlled horizontal machining centre, manufactured in 1999. It features a working range with a longitudinal stroke (X axis) of 800 mm, vertical stroke (Y axis) of 630 mm, and cross stroke (Z axis) of 560 mm. The machine is equipped with an NC rotary table capable of tilting 180° on the A axis and rotating 360° on the B axis, allowing machining on five sides of the workpiece. The maximum workpiece size is approximately 450 x 450 x 340 mm, with exceptions possible for larger sizes. The pallet size measures approximately 450 x 620 mm.
This machining centre utilizes an HSK 63A tool holder and offers spindle speeds ranging from 63 to 20,000 rpm, driven by a spindle motor with a power rating of 60 kW. The feeds and rapid feeds in the XYZ axes range from 1 to 70,000 mm/min. The total electrical load is approximately 60 kW, operating on 400 V and 50 Hz.
The machine includes a 40-position tool magazine with a tool replacement door and laser-operated tool breakage control. It also features internal high-pressure coolant supply at 50 bar, a coolant preparation unit with filter and temperature control, oil mist exhaust, and separate cooling units for the motor spindle and switch cabinet. Additional features include a CO₂ fire extinguisher, chip conveyor, and complete covers for the working area.
The control system is a 5-Axis Siemens CNC Path Control, Model SINUMERIC 840 D, enabling complex multi-axis machining operations. The workpiece handling system allows mounting on a pallet outside the machine, which is then transported via a conveyor into a lifting and turning device for automatic clamping and machining.
The machine weighs approximately 12,500 kg. It originates from the design department of a car manufacturer and was primarily used for trials, making it well suited for medium-sized production series, especially ideal for aluminum machining.
The machine is shown with an open front door revealing internal components, including the spindle and tool holder inside the enclosure. A control panel with a screen and multiple buttons and knobs is mounted on the right side. A protective railing is installed in front of the machine. The overall condition is described as excellent and mint, almost like a new machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
H E L L E R
5 Axis - CNC Controlled Horizontal Machining Centre
Model FST- MC 160 / 800 / E Year 1999
Only approx. 500 hours in operation
Working range: Longitudinal stroke X axis 800 mm
Vertical stroke Y axis 630 mm
Cross stroke Z axis 560 mm
NC rotary table Tilting A axis 180 °
Turning B axis 360 °
max. size of workpiece approx. 450 x 450 x 340 mm
(larger workpiece sizes in exceptions possible)
Size of pallet, approx. 450 x 620 mm
Tool holder HSK 63A
Spindle speeds, infinitely variable 63 20,000 rpm
Feeds / quick feeds XYZ 1 70,000 mm/min
Spindle drive 24 kW
Total electrical
load, approx. 60 kW - 400 V - 50 Hz
Weight, approx. 12,500 kg
Accessories / Special Features
* 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides.
* Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto
the table, where it is automatically clamped and machined.
* 40-position tool magazine with tool replacement door, and laser-operated tool breakage control.
* Internal high pressure coolant supply, 50 bar.
* Coolant preparation unit with filter and temperature
control.
* Oil mist exhaust.
* Separate cooling aggregate for motor spindle and switch cabinet.
* CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials.
The machine is very suitable for medium-sized production series. Ideal for aluminium.
Condition : Excellent, mint condition almost like a new machine. Machine can be
inspected under power.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 164 |
| Last activity | Nov. 7, 2026 |
H E L L E R
5 Axis - CNC Controlled Horizontal Machining Centre
Model FST- MC 160 / 800 / E Year 1999
Only approx. 500 hours in operation
Working range: Longitudinal stroke X axis 800 mm
Vertical stroke Y axis 630 mm
Cross stroke Z axis 560 mm
NC rotary table Tilting A axis 180 °
Turning B axis 360 °
max. size of workpiece approx. 450 x 450 x 340 mm
(larger workpiece sizes in exceptions possible)
Size of pallet, approx. 450 x 620 mm
Tool holder HSK 63A
Spindle speeds, infinitely variable 63 20,000 rpm
Feeds / quick feeds XYZ 1 70,000 mm/min
Spindle drive 24 kW
Total electrical
load, approx. 60 kW - 400 V - 50 Hz
Weight, approx. 12,500 kg
Accessories / Special Features
* 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides.
* Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto
the table, where it is automatically clamped and machined.
* 40-position tool magazine with tool replacement door, and laser-operated tool breakage control.
* Internal high pressure coolant supply, 50 bar.
* Coolant preparation unit with filter and temperature
control.
* Oil mist exhaust.
* Separate cooling aggregate for motor spindle and switch cabinet.
* CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials.
The machine is very suitable for medium-sized production series. Ideal for aluminium.
Condition : Excellent, mint condition almost like a new machine. Machine can be
inspected under power.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Heller FST-MC-160/800/E is a 5-axis CNC controlled horizontal machining centre, manufactured in 1999. It features a working range with a longitudinal stroke (X axis) of 800 mm, vertical stroke (Y axis) of 630 mm, and cross stroke (Z axis) of 560 mm. The machine is equipped with an NC rotary table capable of tilting 180° on the A axis and rotating 360° on the B axis, allowing machining on five sides of the workpiece. The maximum workpiece size is approximately 450 x 450 x 340 mm, with exceptions possible for larger sizes. The pallet size measures approximately 450 x 620 mm.
This machining centre utilizes an HSK 63A tool holder and offers spindle speeds ranging from 63 to 20,000 rpm, driven by a spindle motor with a power rating of 60 kW. The feeds and rapid feeds in the XYZ axes range from 1 to 70,000 mm/min. The total electrical load is approximately 60 kW, operating on 400 V and 50 Hz.
The machine includes a 40-position tool magazine with a tool replacement door and laser-operated tool breakage control. It also features internal high-pressure coolant supply at 50 bar, a coolant preparation unit with filter and temperature control, oil mist exhaust, and separate cooling units for the motor spindle and switch cabinet. Additional features include a CO₂ fire extinguisher, chip conveyor, and complete covers for the working area.
The control system is a 5-Axis Siemens CNC Path Control, Model SINUMERIC 840 D, enabling complex multi-axis machining operations. The workpiece handling system allows mounting on a pallet outside the machine, which is then transported via a conveyor into a lifting and turning device for automatic clamping and machining.
The machine weighs approximately 12,500 kg. It originates from the design department of a car manufacturer and was primarily used for trials, making it well suited for medium-sized production series, especially ideal for aluminum machining.
The machine is shown with an open front door revealing internal components, including the spindle and tool holder inside the enclosure. A control panel with a screen and multiple buttons and knobs is mounted on the right side. A protective railing is installed in front of the machine. The overall condition is described as excellent and mint, almost like a new machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 164 |
| Last activity | Nov. 7, 2026 |
Heller FST-MC-160/800/E
Obráběcí centrum - 5 osé Heller FST-MC-160/800/E
Heller FST-MC-160/800/E
Heller FST-MC-160/800/E Bearbeitungszentrum 5-Achsen
Heller FST-MC-160/800/E
Heller FST-MC-160/800/E Machining center - 5 axis
Centro de mecanizado 5 ejes Heller FST-MC-160/800/E
Centre d'usinage 5 axes Heller FST-MC-160/800/E
Heller FST-MC-160/800/E
Heller FST-MC-160/800/E
Centro di lavoro 5 assi Heller FST-MC-160/800/E
Heller FST-MC-160/800/E
Heller FST-MC-160/800/E
Centrum obróbcze 5osi Heller FST-MC-160/800/E
Heller FST-MC-160/800/E
Heller FST-MC-160/800/E
Heller FST-MC-160/800/E 5-осевой обрабатывающий центр
Heller FST-MC-160/800/E
Heller FST-MC-160/800/E
5 eksenli işleme merkezi Heller FST-MC-160/800/E
EN
- Languages
English (GB)