| Manufacturer | HAUSER |
|---|---|
| Model | S 50 CNC 311 |
| Year | 2016 |
| Location | Switzerland
|
HAUSER S 50 CNC 311 CNC jig grinder, equipped with an ADCOS CNC-800 control. The machine is a two-column execution and is listed as refurbished in 2016. The listed equipment includes a vice, a set of grinding arbors, grinding motors 45 S and 45 ST, and a C axis. The control is described as retrofitted.
The table measures 1020 mm in length and 860 mm in width. Travel is 900 mm on the X axis, 600 mm on the Y axis, and 635 mm for the vertical slide. The passage from the grinding motor to the table is 750 mm, and the passage between the columns is 950 mm. Maximum grinding diameter is 230 mm, or 360 mm with the display-plate. The maximum angle for taper grinding is up to 16°.
The Z-axis has an infinitely adjustable alternating stroke movement, with a listed speed range from 1 mm/min to 12000 mm/min. Z-axis stroke frequency is 6 Hz, and stroke length is infinitely adjustable from 0 to 170 mm. Radial fine feed on the U axis is up to 6 mm. C-axis planetary motion speed is steplessly adjustable from 5 to 300 rpm.
Possible grinding spindle speeds are steplessly adjustable from 4500 to 80000 rpm. With an air turbine, the listed maximum speed is 160000 rpm. Electrical supply is listed as 50 Hz, 3 x 400 V, with total power required of 9 kVA. Approximate machine weight is 6300 kg. Overall dimensions are 3000 mm long, 2500 mm wide, and 2870 mm high.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Type: S 50 CNC 311
Manufacturer: HAUSER
Group: Jig grinder
Subgroup: CNC jig grinder
Control: ADCOS CNC-800
2 columns execution
Table length 1020 mm
Table width 860 mm
Longitudinal travel (X-axis) 900 mm
Transversal travel (Y-axis) 600 mm
Travel of the vertical slide 635 mm
Passage from grinding motor to table 750 mm
Max. grinding diameter 230 mm
with display-plate 360 mm
Passage between the columns 950 mm
Max. angle with taper grinding:
up to 16°
Stroke speed Z-Axis:
Alternating stroke movement, infinitely adjustable.
from Vmin. 1 mm/min
up to Vmax. 12000 mm/min
Stroke frequency Z 6 Hz
Stroke length Z, infinitely adjustable 0 - 170 mm
Radial fine feed U-axis up to 6 mm
Planetary motion speeds: C axis
stepless
from 5 rpm
up to 300 rpm
Possible grinding spindle speeds:
stepless
from 4500 rpm
up to 80000 rpm
With air turbine max. 160000 rpm
Voltage 50 Hz 3x 400 Volt
Total power required 9 kVA
Machine's weight about 6300 kg
Overall machine dimensions:
Length 3000 mm
Width 2500 mm
Height 2870 mm
Vice
Set of grinding arbors
Grinding motor 45 S
Grinding motor 45 ST
C axis
Retrofitted control
Machine refurbished 2016
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 258 |
| Last activity | Nov. 3, 2026 |
Type: S 50 CNC 311
Manufacturer: HAUSER
Group: Jig grinder
Subgroup: CNC jig grinder
Control: ADCOS CNC-800
2 columns execution
Table length 1020 mm
Table width 860 mm
Longitudinal travel (X-axis) 900 mm
Transversal travel (Y-axis) 600 mm
Travel of the vertical slide 635 mm
Passage from grinding motor to table 750 mm
Max. grinding diameter 230 mm
with display-plate 360 mm
Passage between the columns 950 mm
Max. angle with taper grinding:
up to 16°
Stroke speed Z-Axis:
Alternating stroke movement, infinitely adjustable.
from Vmin. 1 mm/min
up to Vmax. 12000 mm/min
Stroke frequency Z 6 Hz
Stroke length Z, infinitely adjustable 0 - 170 mm
Radial fine feed U-axis up to 6 mm
Planetary motion speeds: C axis
stepless
from 5 rpm
up to 300 rpm
Possible grinding spindle speeds:
stepless
from 4500 rpm
up to 80000 rpm
With air turbine max. 160000 rpm
Voltage 50 Hz 3x 400 Volt
Total power required 9 kVA
Machine's weight about 6300 kg
Overall machine dimensions:
Length 3000 mm
Width 2500 mm
Height 2870 mm
Vice
Set of grinding arbors
Grinding motor 45 S
Grinding motor 45 ST
C axis
Retrofitted control
Machine refurbished 2016
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
HAUSER S 50 CNC 311 CNC jig grinder, equipped with an ADCOS CNC-800 control. The machine is a two-column execution and is listed as refurbished in 2016. The listed equipment includes a vice, a set of grinding arbors, grinding motors 45 S and 45 ST, and a C axis. The control is described as retrofitted.
The table measures 1020 mm in length and 860 mm in width. Travel is 900 mm on the X axis, 600 mm on the Y axis, and 635 mm for the vertical slide. The passage from the grinding motor to the table is 750 mm, and the passage between the columns is 950 mm. Maximum grinding diameter is 230 mm, or 360 mm with the display-plate. The maximum angle for taper grinding is up to 16°.
The Z-axis has an infinitely adjustable alternating stroke movement, with a listed speed range from 1 mm/min to 12000 mm/min. Z-axis stroke frequency is 6 Hz, and stroke length is infinitely adjustable from 0 to 170 mm. Radial fine feed on the U axis is up to 6 mm. C-axis planetary motion speed is steplessly adjustable from 5 to 300 rpm.
Possible grinding spindle speeds are steplessly adjustable from 4500 to 80000 rpm. With an air turbine, the listed maximum speed is 160000 rpm. Electrical supply is listed as 50 Hz, 3 x 400 V, with total power required of 9 kVA. Approximate machine weight is 6300 kg. Overall dimensions are 3000 mm long, 2500 mm wide, and 2870 mm high.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 258 |
| Last activity | Nov. 3, 2026 |
Плоскошлифовъчна машина HAUSER S 50 CNC 311
Rovinná bruska HAUSER S 50 CNC 311
HAUSER S 50 CNC 311 Planslibemaskine
HAUSER S 50 CNC 311 Flachschleifmaschine
Επιπεδοτική μηχανή λείανσης HAUSER S 50 CNC 311
HAUSER S 50 CNC 311 Surface grinding machine
Rectificadora tangencial HAUSER S 50 CNC 311
Rectifieuse plane HAUSER S 50 CNC 311
Ravna brusilica HAUSER S 50 CNC 311
HAUSER S 50 CNC 311 Sík köszörűgép
Rettificatrice tangenziale HAUSER S 50 CNC 311
HAUSER S 50 CNC 311 Plokštuminio šlifavimo staklės
HAUSER S 50 CNC 311 Vlakslijpmachine
Szlifierka do płaszczyzn HAUSER S 50 CNC 311
Retificadora plana HAUSER S 50 CNC 311
Mașină de rectificat plană HAUSER S 50 CNC 311
HAUSER S 50 CNC 311 Плоскошлифовальный станок
Ravna brusilica HAUSER S 50 CNC 311
HAUSER S 50 CNC 311 Planslipmaskin
Yüzey taşlama makinesi HAUSER S 50 CNC 311
EN
- Languages
English (GB)