| Manufacturer | Hankison |
|---|---|
| Model | DH-590 |
| Year | 1995 |
| Location | USA
|
| Category | Dryers |
| Type | Air dryers |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 19/10/2026 |
| Product id | P250706070 |
| Language |
Сушилня Hankison DH-590
Sušička Hankison DH-590
Hankison DH-590 Tørretumbler
Hankison DH-590 Trockner
Στεγνωτήριο Hankison DH-590
Hankison DH-590 Dryer
Secador Hankison DH-590
Sécheur Hankison DH-590
Sušilica Hankison DH-590
Hankison DH-590 Szárítógép
Essiccatore Hankison DH-590
Džiovintuvas Hankison DH-590
Hankison DH-590 Droger
Suszarnia Hankison DH-590
Secador Hankison DH-590
Uscător Hankison DH-590
Hankison DH-590 Сушка
Sušilica Hankison DH-590
Hankison DH-590 Torktumlare
Kurutucu Hankison DH-590
|
This listing is for a Hankison heatless regenerative air dryer, model DH-590, manufactured in 1995. It is designed for compressed air drying applications and features two vertical cylindrical desiccant tanks mounted on a sturdy metal frame. The dryer uses activated alumina desiccant to remove moisture from compressed air.
The unit has a rated capacity of 590 SCFM at 100 PSIG and operates within a working pressure range of 50 to 150 PSIG. The maximum operating temperature is 120°F. The desiccant tanks are ASME certified with a maximum allowable working pressure (MAWP) of 250 PSIG at 200°F, and the unit has a total desiccant volume of approximately 55.3 gallons. Power consumption is rated at 44.6 watts with a hold current of 0.61 amps.
The dryer is equipped with a central control panel mounted between the two towers, which includes wiring and controls for operation. Piping and valves are connected at the base of each desiccant tower to facilitate airflow and regeneration cycles.
Cosmetic condition shows visible surface rust and paint wear on the base frame and lower parts of the towers, as well as some rust spots near the certification plate and minor rust stains around the instruction label. The unit has been stored indoors on a concrete floor.
Included are detailed installation, operation, and maintenance instructions, along with system inlet pressure and cycle time tables. The dryer is suitable for industrial compressed air drying needs where a heatless regenerative system is preferred.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hankison heatless regenerative air dryer Model DH-950. Rated at 590 scfm, 100 psig at -40 PDP. Desiccant activated alumina. Desiccant tanks ASME MAWP 250 psig at 200F.
Quantity 1
Capacity 590 acfm
Pressure 150 psig
Year Built 1995
Condition Used - Good
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 57 |
| Last activity | Oct. 27, 2026 |
Solutions 4 Mfg (S4M) is a trusted industrial equipment partner helping manufacturers buy, sell, and maximize the value of machinery worldwide. With more than 50 years of combined industry expertise, the company specializes in serving the Biofuels, Renewable Energy, Edible Oils, and Process Industries.
Through its extensive global network and equipment database, S4M provides fast access to quality new and used machinery, helping clients reduce capital investment, shorten project timelines, and recover value from idle assets. From individual machines to complete production systems, the company delivers practical, cost effective solutions tailored to industrial needs.
Focused on speed, reliability, and return on investment, Solutions 4 Mfg helps manufacturers optimize resources, improve productivity, and make smarter equipment decisions.
Hankison heatless regenerative air dryer Model DH-950. Rated at 590 scfm, 100 psig at -40 PDP. Desiccant activated alumina. Desiccant tanks ASME MAWP 250 psig at 200F.
Quantity 1
Capacity 590 acfm
Pressure 150 psig
Year Built 1995
Condition Used - Good
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Dryers |
| Type | Air dryers |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 19/10/2026 |
| Product id | P250706070 |
| Language |
Сушилня Hankison DH-590
Sušička Hankison DH-590
Hankison DH-590 Tørretumbler
Hankison DH-590 Trockner
Στεγνωτήριο Hankison DH-590
Hankison DH-590 Dryer
Secador Hankison DH-590
Sécheur Hankison DH-590
Sušilica Hankison DH-590
Hankison DH-590 Szárítógép
Essiccatore Hankison DH-590
Džiovintuvas Hankison DH-590
Hankison DH-590 Droger
Suszarnia Hankison DH-590
Secador Hankison DH-590
Uscător Hankison DH-590
Hankison DH-590 Сушка
Sušilica Hankison DH-590
Hankison DH-590 Torktumlare
Kurutucu Hankison DH-590
|
This listing is for a Hankison heatless regenerative air dryer, model DH-590, manufactured in 1995. It is designed for compressed air drying applications and features two vertical cylindrical desiccant tanks mounted on a sturdy metal frame. The dryer uses activated alumina desiccant to remove moisture from compressed air.
The unit has a rated capacity of 590 SCFM at 100 PSIG and operates within a working pressure range of 50 to 150 PSIG. The maximum operating temperature is 120°F. The desiccant tanks are ASME certified with a maximum allowable working pressure (MAWP) of 250 PSIG at 200°F, and the unit has a total desiccant volume of approximately 55.3 gallons. Power consumption is rated at 44.6 watts with a hold current of 0.61 amps.
The dryer is equipped with a central control panel mounted between the two towers, which includes wiring and controls for operation. Piping and valves are connected at the base of each desiccant tower to facilitate airflow and regeneration cycles.
Cosmetic condition shows visible surface rust and paint wear on the base frame and lower parts of the towers, as well as some rust spots near the certification plate and minor rust stains around the instruction label. The unit has been stored indoors on a concrete floor.
Included are detailed installation, operation, and maintenance instructions, along with system inlet pressure and cycle time tables. The dryer is suitable for industrial compressed air drying needs where a heatless regenerative system is preferred.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 57 |
| Last activity | Oct. 27, 2026 |
Solutions 4 Mfg (S4M) is a trusted industrial equipment partner helping manufacturers buy, sell, and maximize the value of machinery worldwide. With more than 50 years of combined industry expertise, the company specializes in serving the Biofuels, Renewable Energy, Edible Oils, and Process Industries.
Through its extensive global network and equipment database, S4M provides fast access to quality new and used machinery, helping clients reduce capital investment, shorten project timelines, and recover value from idle assets. From individual machines to complete production systems, the company delivers practical, cost effective solutions tailored to industrial needs.
Focused on speed, reliability, and return on investment, Solutions 4 Mfg helps manufacturers optimize resources, improve productivity, and make smarter equipment decisions.
EN
- Languages
English (GB)