| Manufacturer | HAMOS |
|---|---|
| Model | KWS 2522-2 |
| Year | 2024 |
| Location | USA
|
The Hamos KWS 2522-2 Electrostatic Separator is designed for efficient cable recycling and the separation of metals embedded within plastic mixtures, such as residual copper in shredded plastics. Manufactured in 2024 by Hamos, this industrial machine offers a throughput capacity of approximately 1,300 kg/h (1.3 metric tons/hour), making it suitable for enhancing metal recovery in cable recycling operations.
This electrostatic separator is typically employed in the final stages of the cable recycling process, following densimetric separation, to recover the final 1-5% of metals contained in plastic mixtures. With an input throughput of 1.3 metric tons per hour, it enables the recovery of up to 22 metric tons of additional copper monthly, depending on material characteristics.
The machine is sold as a complete functional line and includes several key components: an inlet silo with a capacity of 100 cubic feet, a bucket elevator, and an output transport screw. The separation module features four rotating drums, and three transport screws facilitate sorting into three output fractions: plastics, metals, and mixed leftovers. Additionally, the system is equipped with a dust exhaust unit labeled "DUST-MASTER," which includes a motor and visible electrical wiring on top.
The electrostatic separation operates at voltages ranging from 15,000 to 30,000 V using a corona electrostatic system, achieving separation efficiencies of up to 95-98%, depending on the input material. Input material size should be between 0.08 and 0.4 inches (cubic granulate), and the material surface humidity must be below 0.2%. The system requires a 400V, 3-phase power supply with an installed power rating of approximately 25 kW.
The assembled line measures approximately 7011 mm in length, 8230 mm in width, and 5030 mm in height, with a total weight of about 6001 kg. The machine is elevated on stacked black cylindrical supports and features multiple yellow panels and doors with the "hamos" label. A flexible ducting pipe is connected to the machine, and a conveyor or auger system at the base discharges material into a red bucket. The exterior of the unit and dust exhaust system shows minor surface marks and scuffs, indicating the machine has been maintained in clean condition.
This electrostatic separator is a valuable addition to cable recycling facilities aiming to increase metal yield through advanced separation technology.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hamos Electrostatic Separator
Application: Cable recycling, Separation of metals inside plastic mixtures
(e.g. leftover copper in shredded plastics)
The Hams KWS Electrostatic Separator is a great add-on to Cable Recycling facility to increase metal output / yield through the cable chopping process.
The electrostatic separator is used in the final steps of the cable recycling process, after a densimetric separation, to recover the final 1-5% of metals contained in the plastics mix.
With an input throughput of 1.3 metric tons/hour (= 2,645 lbs/hour), this translates to 22 metric tons of extra copper recovered each month.
• Brand / Model: Hamos , model hamos KWS 2522-2 electrostatic separator
• Type: Electrostatic Separator
The machine is sold as a full functional line, including:
* Inlet silo (capacity 100 cubic feet)
* Bucket elevator and output transport screw
* Separation module with 4 rotating drums
* 3 Transport screws for 3 sorted output fractions: plastics, metals and mixed leftover.
* Dust exhaust system
Technical Specifications
• Throughput capacity: approx. 1.3 metric tons/h (depending on input material)
• Input material size: between 0.08 in and 0.4 in (cubic granulate)
• Separation voltage: 15,000 – 30,000 V (corona electrostatic system)
• Separation efficiency: up to 95-98 % dependent on material characteristics
Please note: to achieve the separation, the material must be dry (surface humidity: < 0.2 %), and free of wood, films (layer thickness < 0.05 in), fibres and fibre balls
• Power supply: 400V, 3Ph. Power consumption: Installed power rating approx. 25 kW
• Dimensions of the whole line assembled (L × W × H): 23 × 27 × 16.5 feet
• Weight: 6.6 metric tons (= 13,227 pounds)
Condition & Maintenance
• Year of manufacture: 2024
• Condition: New - Never used, stored during 1 year and fully refurbished
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the year of manufacture for this KWS 2522-2 electrostatic separator?
This KWS 2522-2 electrostatic separator is a 2024 model.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Sept. 10, 2026 |
Hamos Electrostatic Separator
Application: Cable recycling, Separation of metals inside plastic mixtures
(e.g. leftover copper in shredded plastics)
The Hams KWS Electrostatic Separator is a great add-on to Cable Recycling facility to increase metal output / yield through the cable chopping process.
The electrostatic separator is used in the final steps of the cable recycling process, after a densimetric separation, to recover the final 1-5% of metals contained in the plastics mix.
With an input throughput of 1.3 metric tons/hour (= 2,645 lbs/hour), this translates to 22 metric tons of extra copper recovered each month.
• Brand / Model: Hamos , model hamos KWS 2522-2 electrostatic separator
• Type: Electrostatic Separator
The machine is sold as a full functional line, including:
* Inlet silo (capacity 100 cubic feet)
* Bucket elevator and output transport screw
* Separation module with 4 rotating drums
* 3 Transport screws for 3 sorted output fractions: plastics, metals and mixed leftover.
* Dust exhaust system
Technical Specifications
• Throughput capacity: approx. 1.3 metric tons/h (depending on input material)
• Input material size: between 0.08 in and 0.4 in (cubic granulate)
• Separation voltage: 15,000 – 30,000 V (corona electrostatic system)
• Separation efficiency: up to 95-98 % dependent on material characteristics
Please note: to achieve the separation, the material must be dry (surface humidity: < 0.2 %), and free of wood, films (layer thickness < 0.05 in), fibres and fibre balls
• Power supply: 400V, 3Ph. Power consumption: Installed power rating approx. 25 kW
• Dimensions of the whole line assembled (L × W × H): 23 × 27 × 16.5 feet
• Weight: 6.6 metric tons (= 13,227 pounds)
Condition & Maintenance
• Year of manufacture: 2024
• Condition: New - Never used, stored during 1 year and fully refurbished
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the year of manufacture for this KWS 2522-2 electrostatic separator?
This KWS 2522-2 electrostatic separator is a 2024 model.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Hamos KWS 2522-2 Electrostatic Separator is designed for efficient cable recycling and the separation of metals embedded within plastic mixtures, such as residual copper in shredded plastics. Manufactured in 2024 by Hamos, this industrial machine offers a throughput capacity of approximately 1,300 kg/h (1.3 metric tons/hour), making it suitable for enhancing metal recovery in cable recycling operations.
This electrostatic separator is typically employed in the final stages of the cable recycling process, following densimetric separation, to recover the final 1-5% of metals contained in plastic mixtures. With an input throughput of 1.3 metric tons per hour, it enables the recovery of up to 22 metric tons of additional copper monthly, depending on material characteristics.
The machine is sold as a complete functional line and includes several key components: an inlet silo with a capacity of 100 cubic feet, a bucket elevator, and an output transport screw. The separation module features four rotating drums, and three transport screws facilitate sorting into three output fractions: plastics, metals, and mixed leftovers. Additionally, the system is equipped with a dust exhaust unit labeled "DUST-MASTER," which includes a motor and visible electrical wiring on top.
The electrostatic separation operates at voltages ranging from 15,000 to 30,000 V using a corona electrostatic system, achieving separation efficiencies of up to 95-98%, depending on the input material. Input material size should be between 0.08 and 0.4 inches (cubic granulate), and the material surface humidity must be below 0.2%. The system requires a 400V, 3-phase power supply with an installed power rating of approximately 25 kW.
The assembled line measures approximately 7011 mm in length, 8230 mm in width, and 5030 mm in height, with a total weight of about 6001 kg. The machine is elevated on stacked black cylindrical supports and features multiple yellow panels and doors with the "hamos" label. A flexible ducting pipe is connected to the machine, and a conveyor or auger system at the base discharges material into a red bucket. The exterior of the unit and dust exhaust system shows minor surface marks and scuffs, indicating the machine has been maintained in clean condition.
This electrostatic separator is a valuable addition to cable recycling facilities aiming to increase metal yield through advanced separation technology.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Sept. 10, 2026 |
Електростатичен сепаратор HAMOS KWS 2522-2
Elektrostatický separátor HAMOS KWS 2522-2
HAMOS KWS 2522-2 Elektrostatisk separator
HAMOS KWS 2522-2 Elektrostatischer Separator
Ηλεκτροστατικός διαχωριστής HAMOS KWS 2522-2
HAMOS KWS 2522-2 Electrostatic separator
Separador electrostático HAMOS KWS 2522-2
Séparateur électrostatique HAMOS KWS 2522-2
Elektrostatički separator HAMOS KWS 2522-2
HAMOS KWS 2522-2 Elektrosztatikus szeparátor
Separatore elettrostatico HAMOS KWS 2522-2
HAMOS KWS 2522-2 Elektrostatinis separatorius
HAMOS KWS 2522-2 Elektrostatische scheider
Separator elektrostatyczny HAMOS KWS 2522-2
Separador eletrostático HAMOS KWS 2522-2
Separator electrostatic HAMOS KWS 2522-2
HAMOS KWS 2522-2 Электростатический сепаратор
Elektrostatički separator HAMOS KWS 2522-2
HAMOS KWS 2522-2 Elektrostatisk separator
Elektrostatik ayırıcı HAMOS KWS 2522-2
EN
- Languages
English (GB)