Contact us to receive an offer.
| Category | Bending - CNC press brakes |
| Strength | 40 T |
| Folding length | 1600 mm |
| CNC | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 17/11/2026 |
| Product id | P261117141 |
| Language |
Haco PPM 1640 press brake with simple NC control. The stated working width is 1 600 mm, and the stated sheet thickness is 7 mm. The bending angle is 90°. The machine is described as compact for its working capacity, with a low height and modest power supply requirements.
The stated power supply is 230 V, 16 A, three-phase. The description specifies that the machine has a blue 16 A plug. The number of phases is 3. The electrical data presented here are reproduced as given in the product information.
Various accessories are included with the machine. Their exact type and quantity are not specified. The control system is described as NC, with no further details provided about its functions, settings, or programming method. No information is provided about the year of manufacture, operating hours, or other technical specifications beyond those listed above.
The description states that the machine was used in a workshop that was not specifically designed for this type of equipment. Its low height and power supply requirements are noted as considerations for its placement. No separate details are provided about its current technical or visual condition, or about any repairs or maintenance performed.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Haco PPM 1640 Press Brake
Working width: 1,600 mm
Sheet thickness: 7 mm
Bending angle: 90 °
Voltage: 230
Number of phases: 3
The machine comes with various tooling included and has worked very well for our needs.
Simple and Reliable NC Control
This is a very compact machine considering its working capacity. We have operated it in a workshop that wasn’t really designed for this type of machinery, but thanks to its low height and modest power requirements, it has worked perfectly.
Power supply: 230 V, 16 A, three-phase (blue 16 A plug).
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Nov. 17, 2026 |
Haco PPM 1640 Press Brake
Working width: 1,600 mm
Sheet thickness: 7 mm
Bending angle: 90 °
Voltage: 230
Number of phases: 3
The machine comes with various tooling included and has worked very well for our needs.
Simple and Reliable NC Control
This is a very compact machine considering its working capacity. We have operated it in a workshop that wasn’t really designed for this type of machinery, but thanks to its low height and modest power requirements, it has worked perfectly.
Power supply: 230 V, 16 A, three-phase (blue 16 A plug).
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Bending - CNC press brakes |
| Strength | 40 T |
| Folding length | 1600 mm |
| CNC | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 17/11/2026 |
| Product id | P261117141 |
| Language |
Haco PPM 1640 press brake with simple NC control. The stated working width is 1 600 mm, and the stated sheet thickness is 7 mm. The bending angle is 90°. The machine is described as compact for its working capacity, with a low height and modest power supply requirements.
The stated power supply is 230 V, 16 A, three-phase. The description specifies that the machine has a blue 16 A plug. The number of phases is 3. The electrical data presented here are reproduced as given in the product information.
Various accessories are included with the machine. Their exact type and quantity are not specified. The control system is described as NC, with no further details provided about its functions, settings, or programming method. No information is provided about the year of manufacture, operating hours, or other technical specifications beyond those listed above.
The description states that the machine was used in a workshop that was not specifically designed for this type of equipment. Its low height and power supply requirements are noted as considerations for its placement. No separate details are provided about its current technical or visual condition, or about any repairs or maintenance performed.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Nov. 17, 2026 |