Contact us to receive an offer.
| Manufacturer | HACO |
|---|---|
| Model | HS 3010 |
| Year | 1983 |
| Location | France
|
This HACO HS 3010 hydraulic guillotine shear is designed for precise cutting of sheet metal with a maximum cutting length of 3000 mm and a maximum thickness capacity of 10 mm. The machine features a manual back gauge and manual blade gap adjustment, allowing for controlled and customizable cutting operations. It supports cutting angles adjustable between 1° and 3°, providing flexibility for various cutting requirements.
The machine measures 4000 mm in length, 2100 mm in width, and 2200 mm in height, with a substantial weight of 8000 kg, indicating a robust and stable construction suitable for industrial environments. It operates on a 380 V power supply.
The hydraulic guillotine shear is equipped with a control panel located on the upper left side, facilitating operator control. The cutting blade area includes a yellow protective strip above the cutting edge for safety. A large foot pedal or lever is situated on the front right side, likely used for operation control.
The machine's base features a protective mesh or grille on the left side, which may serve to safeguard internal components or enhance ventilation. The rear of the machine reveals visible hydraulic cylinders and hoses beneath the work surface, essential for the hydraulic cutting mechanism. Large metal side panels are present on both ends of the machine, contributing to its structural integrity.
Visible signs of wear and rust are present on the lower front panel, and a detached metal piece is noted lying on the ground in front of the machine, which may require attention. The surface shows dirt and signs of use but no visible severe damage, indicating the machine has been used but remains structurally intact.
Overall, this HACO HS 3010 is a heavy-duty hydraulic guillotine shear suitable for industrial sheet metal cutting tasks, with manual adjustments for precision and flexibility. Potential buyers should consider the noted wear and detached parts when evaluating the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Capacity
3000 x 10 mm
Backgauge travel
1000 mm
Various
Manual blade gap adjustment
Miscellaneous
Cutting angle: 1° to 3
Voltage
380 V
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the cutting capacity of this HACO HS 3010?
This HACO HS 3010 hydraulic shear has a capacity of 3000 mm x 10 mm.
What is the back gauge travel of the machine?
This hydraulic shear features a back gauge travel of 1000 mm.
What voltage does this HACO HS 3010 operate at?
This HACO HS 3010 hydraulic shear operates at a voltage of 380 V.
What are the dimensions of the machine?
This equipment has dimensions of 4000 mm in length, 2100 mm in width, and 2200 mm in height.
What is the weight of this hydraulic shear?
This hydraulic shear weighs approximately 8 tons.
When was this HACO HS 3010 manufactured?
This HACO HS 3010 hydraulic shear was constructed in the year 1983.
Can the clearance between blades be manually adjusted on the machine?
This equipment allows for manual adjustment of clearance between blades.
What is the cutting angle range of this hydraulic shear?
This hydraulic shear has a cutting angle that ranges from 1° to 3°.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 69 |
| Last activity | Nov. 6, 2026 |
Capacity
3000 x 10 mm
Backgauge travel
1000 mm
Various
Manual blade gap adjustment
Miscellaneous
Cutting angle: 1° to 3
Voltage
380 V
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the cutting capacity of this HACO HS 3010?
This HACO HS 3010 hydraulic shear has a capacity of 3000 mm x 10 mm.
What is the back gauge travel of the machine?
This hydraulic shear features a back gauge travel of 1000 mm.
What voltage does this HACO HS 3010 operate at?
This HACO HS 3010 hydraulic shear operates at a voltage of 380 V.
What are the dimensions of the machine?
This equipment has dimensions of 4000 mm in length, 2100 mm in width, and 2200 mm in height.
What is the weight of this hydraulic shear?
This hydraulic shear weighs approximately 8 tons.
When was this HACO HS 3010 manufactured?
This HACO HS 3010 hydraulic shear was constructed in the year 1983.
Can the clearance between blades be manually adjusted on the machine?
This equipment allows for manual adjustment of clearance between blades.
What is the cutting angle range of this hydraulic shear?
This hydraulic shear has a cutting angle that ranges from 1° to 3°.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This HACO HS 3010 hydraulic guillotine shear is designed for precise cutting of sheet metal with a maximum cutting length of 3000 mm and a maximum thickness capacity of 10 mm. The machine features a manual back gauge and manual blade gap adjustment, allowing for controlled and customizable cutting operations. It supports cutting angles adjustable between 1° and 3°, providing flexibility for various cutting requirements.
The machine measures 4000 mm in length, 2100 mm in width, and 2200 mm in height, with a substantial weight of 8000 kg, indicating a robust and stable construction suitable for industrial environments. It operates on a 380 V power supply.
The hydraulic guillotine shear is equipped with a control panel located on the upper left side, facilitating operator control. The cutting blade area includes a yellow protective strip above the cutting edge for safety. A large foot pedal or lever is situated on the front right side, likely used for operation control.
The machine's base features a protective mesh or grille on the left side, which may serve to safeguard internal components or enhance ventilation. The rear of the machine reveals visible hydraulic cylinders and hoses beneath the work surface, essential for the hydraulic cutting mechanism. Large metal side panels are present on both ends of the machine, contributing to its structural integrity.
Visible signs of wear and rust are present on the lower front panel, and a detached metal piece is noted lying on the ground in front of the machine, which may require attention. The surface shows dirt and signs of use but no visible severe damage, indicating the machine has been used but remains structurally intact.
Overall, this HACO HS 3010 is a heavy-duty hydraulic guillotine shear suitable for industrial sheet metal cutting tasks, with manual adjustments for precision and flexibility. Potential buyers should consider the noted wear and detached parts when evaluating the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 69 |
| Last activity | Nov. 6, 2026 |
хидравлична ножица HACO HS 3010
Hydraulické nůžky / gilotiny HACO HS 3010
hydraulisk saks HACO HS 3010
HACO HS 3010 Hydraulische Blechschere
υδραυλική διάτμηση HACO HS 3010
HACO HS 3010 hydraulic shear
Cizalla guillotina hidráulica HACO HS 3010
Cisaille guillotine hydraulique HACO HS 3010
hidrauličke škare HACO HS 3010
HACO HS 3010 hidraulikus nyíró
Cesoia ghigliottina idraulica HACO HS 3010
hidraulinis kirpimas HACO HS 3010
HACO HS 3010 hydraulische schaar
Nożyce gilotynowe hydrauliczne HACO HS 3010
tesoura hidráulica HACO HS 3010
forfecare hidraulica HACO HS 3010
HACO HS 3010 Гидравлические гильотинные ножницы
hidraulične makaze HACO HS 3010
HACO HS 3010 hydraulisk sax
Hidrolik giyotin makas HACO HS 3010
EN
- Languages
English (GB)