| Manufacturer | HAAS |
|---|---|
| Model | VM-6 HE |
| Year | 2008 |
| Location | Slovenia
|
Overview
This listing is for a HAAS VM-6 HE 3-axis vertical machining centre, manufactured in 2008. It is configured for high-speed machining and includes through-spindle coolant (TSC) and a 24-position tool changer. The machine uses a HAAS control.
Key specifications
- Manufacturer / model: HAAS VM-6 HE
- Year manufactured: 2008
- Axes: 3
- X-axis travel: 1626 mm
- Y-axis travel: 813 mm
- Z-axis travel: 762 mm
- Spindle speed (max): 12,000 rpm
- Spindle taper: ISO 40
- Tool stations: 24
- Through-Spindle Coolant (TSC): Yes
- High Speed Machining: Yes
- Spindle motor: Yaskawa Electric, Type UAKB-31BHA12 (AC spindle motor)
- Control brand: HAAS
- Electrical supply: 360–480 V, 3-phase, 50–60 Hz; full load 40 A; largest load 70 A
Service / condition notes
A complete spindle was replaced with a new unit in May 2021; control counters were reset at that time and therefore do not reflect total lifetime hours. Counters recorded since the spindle replacement are: Power On Time 5,204 h; Cycle Start Time 3,525 h; Feed Cutting Time 427 h; M30 Counter 121,779. Current machine condition: not operational due to a defective main spindle motor. No claims are made regarding operational status beyond the defect noted.
Buyer considerations
This machine may be of interest for high-speed mold machining given its long X travel and HSM-capable spindle. The spindle replacement in 2021 and the post-replacement counters are provided for buyer assessment. The listed defective main spindle motor will require repair or replacement; factor this into inspection and purchase planning. All information above is taken from the provided machine data and description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis HAAS VM-6 HE Mold Maker was manufactured in 2008. It features an impressive X-axis travel of approximately 1,626 mm, Y-axis travel of approximately 813 mm, and Z-axis travel of approximately 762 mm. The machine includes a 24-position tool changer and has high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 HE vertical machining centre we have for sale. Contact us for further details.Through-Spindle Coolant (TSC): Yes
High Speed Machining: Yes
Electrical supply: 360–480 V, 3-phase, 50–60 Hz
Full load: 40 A
Largest load: 70 A
Spindle history: Complete spindle replaced with a new unit in May 2021; control counters were reset afterward (do not reflect total lifetime hours)
Current counters since spindle replacement:
Power On Time: 5,204 h
Cycle Start Time: 3,525 h
Feed Cutting Time: 427 h
M30 Counter: 121,779
Current machine condition: Not operational due to a defective main spindle motor
Spindle motor: Yaskawa Electric, Type UAKB-31BHA12, AC Spindle Motor
Control Brand: HAAS
Number of Axes: 3
Tool Stations: 24
Spindle Speed: 12000 RPM
Taper Size: ISO 40
X-axis Travel: 1626 mm
Y-axis Travel: 813 mm
Z-axis Travel: 762 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2082 |
| Last activity | Oct. 28, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis HAAS VM-6 HE Mold Maker was manufactured in 2008. It features an impressive X-axis travel of approximately 1,626 mm, Y-axis travel of approximately 813 mm, and Z-axis travel of approximately 762 mm. The machine includes a 24-position tool changer and has high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 HE vertical machining centre we have for sale. Contact us for further details.Through-Spindle Coolant (TSC): Yes
High Speed Machining: Yes
Electrical supply: 360–480 V, 3-phase, 50–60 Hz
Full load: 40 A
Largest load: 70 A
Spindle history: Complete spindle replaced with a new unit in May 2021; control counters were reset afterward (do not reflect total lifetime hours)
Current counters since spindle replacement:
Power On Time: 5,204 h
Cycle Start Time: 3,525 h
Feed Cutting Time: 427 h
M30 Counter: 121,779
Current machine condition: Not operational due to a defective main spindle motor
Spindle motor: Yaskawa Electric, Type UAKB-31BHA12, AC Spindle Motor
Control Brand: HAAS
Number of Axes: 3
Tool Stations: 24
Spindle Speed: 12000 RPM
Taper Size: ISO 40
X-axis Travel: 1626 mm
Y-axis Travel: 813 mm
Z-axis Travel: 762 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
This listing is for a HAAS VM-6 HE 3-axis vertical machining centre, manufactured in 2008. It is configured for high-speed machining and includes through-spindle coolant (TSC) and a 24-position tool changer. The machine uses a HAAS control.
Key specifications
- Manufacturer / model: HAAS VM-6 HE
- Year manufactured: 2008
- Axes: 3
- X-axis travel: 1626 mm
- Y-axis travel: 813 mm
- Z-axis travel: 762 mm
- Spindle speed (max): 12,000 rpm
- Spindle taper: ISO 40
- Tool stations: 24
- Through-Spindle Coolant (TSC): Yes
- High Speed Machining: Yes
- Spindle motor: Yaskawa Electric, Type UAKB-31BHA12 (AC spindle motor)
- Control brand: HAAS
- Electrical supply: 360–480 V, 3-phase, 50–60 Hz; full load 40 A; largest load 70 A
Service / condition notes
A complete spindle was replaced with a new unit in May 2021; control counters were reset at that time and therefore do not reflect total lifetime hours. Counters recorded since the spindle replacement are: Power On Time 5,204 h; Cycle Start Time 3,525 h; Feed Cutting Time 427 h; M30 Counter 121,779. Current machine condition: not operational due to a defective main spindle motor. No claims are made regarding operational status beyond the defect noted.
Buyer considerations
This machine may be of interest for high-speed mold machining given its long X travel and HSM-capable spindle. The spindle replacement in 2021 and the post-replacement counters are provided for buyer assessment. The listed defective main spindle motor will require repair or replacement; factor this into inspection and purchase planning. All information above is taken from the provided machine data and description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2082 |
| Last activity | Oct. 28, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център HAAS VM-6 HE
Vertikální obráběcí centrum HAAS VM-6 HE
HAAS VM-6 HE Lodret bearbejdningscenter
HAAS VM-6 HE Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας HAAS VM-6 HE
HAAS VM-6 HE Vertical machining center
Centro de mecanizado vertical HAAS VM-6 HE
Centre d'usinage vertical HAAS VM-6 HE
Vertikalni obradni centar HAAS VM-6 HE
HAAS VM-6 HE Függőleges megmunkáló központ
Centro di lavoro verticale HAAS VM-6 HE
HAAS VM-6 HE Vertikalus apdirbimo centras
HAAS VM-6 HE Verticaal bewerkingscentrum
Pionowe centrum obróbcze HAAS VM-6 HE
Centro de usinagem vertical HAAS VM-6 HE
Centru de prelucrare vertical HAAS VM-6 HE
HAAS VM-6 HE Вертикальный обрабатывающий центр
Vertikalni obradni centar HAAS VM-6 HE
HAAS VM-6 HE Vertikalt bearbetningscenter
Dikey işleme merkezi HAAS VM-6 HE
EN
- Languages
English (GB)