Contact us to receive an offer.
| Manufacturer | Haas |
|---|---|
| Model | VF1 |
| Year | 2018 |
| Location | Turkey
|
This listing features a Haas VF1 Vertical Machining Center, manufactured in 2018. It offers a working envelope with travel distances of 508 mm on the X-axis, 406 mm on the Y-axis, and 508 mm on the Z-axis. The machine table measures 660 mm in length and 356 mm in width, with three standard T-slots each 16 mm wide and spaced 125 mm apart. The table can support a maximum evenly distributed payload of 1361 kg.
The spindle is powered by a 24 kW motor and can reach speeds up to 8100 rpm. It uses a direct drive system with an SK40 taper and features air/oil injection bearing lubrication along with liquid cooling. The spindle torque reaches up to 122 Nm at 2000 rpm. Axis feed speeds are 25.4 m/min for X, Y, and Z axes, with a maximum cutting speed of 16.5 m/min.
The tool changer has a capacity for 20 tools, accommodating tool diameters up to 89 mm (with an empty adjacent pocket) and tool weights up to 5.4 kg when fully loaded. The machine requires compressed air at 6.9 bar and 113 L/min and has a coolant capacity of 208 liters.
The machine is equipped with dual front doors featuring transparent windows for visibility and accessibility. The control panel is located on the right side and includes a screen, various buttons, and an emergency stop button for safety. A tool holder carousel with multiple tool slots is mounted on the left side.
The machining center shows signs of use, including some discoloration and wear marks on the control panel and base. Blue and yellow plastic bins are positioned nearby, likely for parts or tools. The total recorded working hours are approximately 22,000 as of November 2024.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Haas VF1 Vertical Machining Center
Working hour: 22 000 (November 2024)
X / Y / Z : 508 / 406 / 508 mm
Spindle to table (max) : 610 mm
Spindle to table (min) : 102 mm
Table size: 660 mm x 356 mm
T-Slot Width: 16 mm
T-Slot Center Distance: 125.0 mm
Number of Standard T-Slots: 3
Machine table payload (Evenly Distributed):1361 kg
Spindle:
Spindle Power: 22.4 kW
Maximum Speed: 8100 rpm
Maximum Spindle Torque: 122 Nm @ 2000 rpm
Spindle Drive System: Direct Drive
Taper : SK40
Bearing Lubrication : Air / Oil Injection
Cooling : Liquid Cooled
Feed Speeds:
Axis Speed (X/Y/Z): 25.4 / 25.4 / 25.4 m/ min
Cutting Speed : 16.5 m/ min
Tool Changer:
Number of Tools : 20
Max. Tool Diameter (with empty side pocket): 89 mm
Max. Tool Weight (with full load): 5.4 kg
Air Requirement :113 L/min, 6.9 bar
Coolant Capacity : 208 L
vf1 ise 22.000 saat
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of model is this Haas VF1 machining center?
This Haas VF1 machining center is a vertical model.
When was this equipment manufactured?
This equipment was manufactured in 2018.
When was this Haas VF1 manufactured?
This Haas VF1 vertical machining center was manufactured in 2018.
When was the machine manufactured?
This Haas VF-3 vertical machining center was manufactured in 2014.
When was this VF 3 CNC machining center manufactured?
This Haas VF 3 CNC machining center was manufactured in 2011.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 2 |
| Last activity | Nov. 2, 2026 |
Haas VF1 Vertical Machining Center
Working hour: 22 000 (November 2024)
X / Y / Z : 508 / 406 / 508 mm
Spindle to table (max) : 610 mm
Spindle to table (min) : 102 mm
Table size: 660 mm x 356 mm
T-Slot Width: 16 mm
T-Slot Center Distance: 125.0 mm
Number of Standard T-Slots: 3
Machine table payload (Evenly Distributed):1361 kg
Spindle:
Spindle Power: 22.4 kW
Maximum Speed: 8100 rpm
Maximum Spindle Torque: 122 Nm @ 2000 rpm
Spindle Drive System: Direct Drive
Taper : SK40
Bearing Lubrication : Air / Oil Injection
Cooling : Liquid Cooled
Feed Speeds:
Axis Speed (X/Y/Z): 25.4 / 25.4 / 25.4 m/ min
Cutting Speed : 16.5 m/ min
Tool Changer:
Number of Tools : 20
Max. Tool Diameter (with empty side pocket): 89 mm
Max. Tool Weight (with full load): 5.4 kg
Air Requirement :113 L/min, 6.9 bar
Coolant Capacity : 208 L
vf1 ise 22.000 saat
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of model is this Haas VF1 machining center?
This Haas VF1 machining center is a vertical model.
When was this equipment manufactured?
This equipment was manufactured in 2018.
When was this Haas VF1 manufactured?
This Haas VF1 vertical machining center was manufactured in 2018.
When was the machine manufactured?
This Haas VF-3 vertical machining center was manufactured in 2014.
When was this VF 3 CNC machining center manufactured?
This Haas VF 3 CNC machining center was manufactured in 2011.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing features a Haas VF1 Vertical Machining Center, manufactured in 2018. It offers a working envelope with travel distances of 508 mm on the X-axis, 406 mm on the Y-axis, and 508 mm on the Z-axis. The machine table measures 660 mm in length and 356 mm in width, with three standard T-slots each 16 mm wide and spaced 125 mm apart. The table can support a maximum evenly distributed payload of 1361 kg.
The spindle is powered by a 24 kW motor and can reach speeds up to 8100 rpm. It uses a direct drive system with an SK40 taper and features air/oil injection bearing lubrication along with liquid cooling. The spindle torque reaches up to 122 Nm at 2000 rpm. Axis feed speeds are 25.4 m/min for X, Y, and Z axes, with a maximum cutting speed of 16.5 m/min.
The tool changer has a capacity for 20 tools, accommodating tool diameters up to 89 mm (with an empty adjacent pocket) and tool weights up to 5.4 kg when fully loaded. The machine requires compressed air at 6.9 bar and 113 L/min and has a coolant capacity of 208 liters.
The machine is equipped with dual front doors featuring transparent windows for visibility and accessibility. The control panel is located on the right side and includes a screen, various buttons, and an emergency stop button for safety. A tool holder carousel with multiple tool slots is mounted on the left side.
The machining center shows signs of use, including some discoloration and wear marks on the control panel and base. Blue and yellow plastic bins are positioned nearby, likely for parts or tools. The total recorded working hours are approximately 22,000 as of November 2024.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 2 |
| Last activity | Nov. 2, 2026 |
Обработващ център - вертикален Haas VF1
Obráběcí centrum - vertikální Haas VF1
Haas VF1 Bearbejdningscenter - lodret
Haas VF1 Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο Haas VF1
Haas VF1 Vertical Machining Center
Centro de mecanizado vertical Haas VF1
Centre d'usinage vertical Haas VF1
Obradni centar - vertikalni Haas VF1
Haas VF1 Megmunkáló központ - függőleges
Centro di lavoro verticale Haas VF1
Apdirbimo centras – vertikalus Haas VF1
Haas VF1 Bewerkingscentrum - verticaal
Pionowe centrum obróbcze Haas VF1
Centro de usinagem - vertical Haas VF1
Centru de prelucrare - vertical Haas VF1
Haas VF1 Вертикальный обрабатывающий центр
Obradni centar - vertikalni Haas VF1
Haas VF1 Bearbetningscentrum - vertikalt
Dikey işleme merkezi Haas VF1
EN
- Languages
English (GB)