Contact us to receive an offer.
| Manufacturer | HAAS |
|---|---|
| Model | VF-3YT |
| Year | 2018 |
| Location | Poland
|
The HAAS VF-3YT is a vertical machining center designed for precision machining of heavy and large workpieces. Manufactured in 2018, this model features a robust worktable measuring 1372 mm in length and 610 mm in width, capable of supporting parts weighing up to 1588 kg. The machining center operates with a travel range of 1016 mm along the X-axis, 660 mm on the Y-axis, and 635 mm on the Z-axis, providing ample space for complex machining tasks.
Equipped with a powerful 22.4 kW spindle motor, the machine achieves a maximum spindle speed of 8100 rpm. It uses a CT40 spindle taper and benefits from cooling through the spindle to maintain optimal operating temperatures. The spindle is driven by an inline direct-drive system, producing a maximum torque of 122 Nm at 2000 rpm. The tool changer magazine holds up to 20 tools, accommodating tools with a maximum diameter of 89 mm and weight of 5.4 kg.
The HAAS NGC CNC control system allows for efficient programming of machining operations, facilitating the creation of advanced machining programs. The machine supports accelerated feed rates of up to 18 m/min on all axes and can achieve a maximum cutting speed of 12.7 m/min. The worktable includes 7 T-slots with a spacing of 80 mm and widths ranging from 15.9 to 16 mm, enabling secure fixture mounting.
The machine weighs approximately 5697 kg and includes a coolant tank with a capacity of 208 liters. It operates on a 3-phase 440 V power supply, compatible with both 50 and 60 Hz frequencies.
From the images, the machine features two large front doors with windows for easy access and visibility into the machining area. A control panel with a screen and various buttons is located on the right side for operator interface. Tool holders and tools are organized on a shelf on the left side of the machine. The interior workspace shows metal workpieces secured on the table with clamps and chucks. The machine appears clean and well-maintained externally, while the interior shows signs of use with some discoloration but no visible damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The HAAS VF-3YT CNC vertical machining center was manufactured in 2018 in the United States. This extremely easy-to-use machine with wide machining capabilities is used in precise machining of heavy details weighing up to 1588 kg. Thanks to the perfect combination of functionality, productivity and precision, the HAAS milling machine achieves excellent machining results throughout its entire service life, even with the largest loads.
The machining process is carried out by the machine on a stable work table with a length of 1372 mm and a width of 610 mm, using reliable components in the form of a spindle and cutting tools taken from a 20-position magazine. All machining parameters are programmed in the perfectly optimized HAAS NGC CNC control, which allows the creation of advanced machining programs in just a few steps. The offered HAAS VF 3YT CNC machining center has worked 21,148 hours so far. The total weight of the machine is 5697 kg.
CNC control: HAAS NGC
- X/Y/Z axis feed: 1016/660/635 mm
- X, Y, Z axis accelerated feed: 18 m/min
- worktable dimensions (length x width): 1372 x 610 mm
- maximum workpiece weight: 1588 kg
- maximum spindle speed: 8100 rpm
- spindle taper: CT40
- cooling through the spindle
- drive type: Inline Direct-Drive
- maximum spindle torque (at 2000 rpm): 122 Nm
- 20-position tool magazine
- maximum tool diameter: 89 mm
- maximum tool weight: 5.4 kg
- maximum cutting speed: 12.7 m/min
- working hours: 21148 h
- number of tool changes: 476834
- maximum distance from the spindle tip to the table surface : 742 mm
- minimum distance from spindle nose to work table surface : 107 mm
- number of T-slots : 7
- spacing between T-slots : 80 mm
- width of T-slots : 15.9-16 mm
- coolant tank capacity : 208 l
- engine power : 22.4 kW
- power supply : 3x 440; 50/60 Hz
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 425 |
| Last activity | Nov. 3, 2026 |
The HAAS VF-3YT CNC vertical machining center was manufactured in 2018 in the United States. This extremely easy-to-use machine with wide machining capabilities is used in precise machining of heavy details weighing up to 1588 kg. Thanks to the perfect combination of functionality, productivity and precision, the HAAS milling machine achieves excellent machining results throughout its entire service life, even with the largest loads.
The machining process is carried out by the machine on a stable work table with a length of 1372 mm and a width of 610 mm, using reliable components in the form of a spindle and cutting tools taken from a 20-position magazine. All machining parameters are programmed in the perfectly optimized HAAS NGC CNC control, which allows the creation of advanced machining programs in just a few steps. The offered HAAS VF 3YT CNC machining center has worked 21,148 hours so far. The total weight of the machine is 5697 kg.
CNC control: HAAS NGC
- X/Y/Z axis feed: 1016/660/635 mm
- X, Y, Z axis accelerated feed: 18 m/min
- worktable dimensions (length x width): 1372 x 610 mm
- maximum workpiece weight: 1588 kg
- maximum spindle speed: 8100 rpm
- spindle taper: CT40
- cooling through the spindle
- drive type: Inline Direct-Drive
- maximum spindle torque (at 2000 rpm): 122 Nm
- 20-position tool magazine
- maximum tool diameter: 89 mm
- maximum tool weight: 5.4 kg
- maximum cutting speed: 12.7 m/min
- working hours: 21148 h
- number of tool changes: 476834
- maximum distance from the spindle tip to the table surface : 742 mm
- minimum distance from spindle nose to work table surface : 107 mm
- number of T-slots : 7
- spacing between T-slots : 80 mm
- width of T-slots : 15.9-16 mm
- coolant tank capacity : 208 l
- engine power : 22.4 kW
- power supply : 3x 440; 50/60 Hz
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The HAAS VF-3YT is a vertical machining center designed for precision machining of heavy and large workpieces. Manufactured in 2018, this model features a robust worktable measuring 1372 mm in length and 610 mm in width, capable of supporting parts weighing up to 1588 kg. The machining center operates with a travel range of 1016 mm along the X-axis, 660 mm on the Y-axis, and 635 mm on the Z-axis, providing ample space for complex machining tasks.
Equipped with a powerful 22.4 kW spindle motor, the machine achieves a maximum spindle speed of 8100 rpm. It uses a CT40 spindle taper and benefits from cooling through the spindle to maintain optimal operating temperatures. The spindle is driven by an inline direct-drive system, producing a maximum torque of 122 Nm at 2000 rpm. The tool changer magazine holds up to 20 tools, accommodating tools with a maximum diameter of 89 mm and weight of 5.4 kg.
The HAAS NGC CNC control system allows for efficient programming of machining operations, facilitating the creation of advanced machining programs. The machine supports accelerated feed rates of up to 18 m/min on all axes and can achieve a maximum cutting speed of 12.7 m/min. The worktable includes 7 T-slots with a spacing of 80 mm and widths ranging from 15.9 to 16 mm, enabling secure fixture mounting.
The machine weighs approximately 5697 kg and includes a coolant tank with a capacity of 208 liters. It operates on a 3-phase 440 V power supply, compatible with both 50 and 60 Hz frequencies.
From the images, the machine features two large front doors with windows for easy access and visibility into the machining area. A control panel with a screen and various buttons is located on the right side for operator interface. Tool holders and tools are organized on a shelf on the left side of the machine. The interior workspace shows metal workpieces secured on the table with clamps and chucks. The machine appears clean and well-maintained externally, while the interior shows signs of use with some discoloration but no visible damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 425 |
| Last activity | Nov. 3, 2026 |
Обработващ център - вертикален HAAS VF-3YT
Obráběcí centrum - vertikální HAAS VF-3YT
HAAS VF-3YT Bearbejdningscenter - lodret
HAAS VF-3YT Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο HAAS VF-3YT
HAAS VF-3YT Machining center - vertical
Centro de mecanizado vertical HAAS VF-3YT
Centre d'usinage vertical HAAS VF-3YT
Obradni centar - vertikalni HAAS VF-3YT
HAAS VF-3YT Megmunkáló központ - függőleges
Centro di lavoro verticale HAAS VF-3YT
Apdirbimo centras – vertikalus HAAS VF-3YT
HAAS VF-3YT Bewerkingscentrum - verticaal
Pionowe centrum obróbcze HAAS VF-3YT
Centro de usinagem - vertical HAAS VF-3YT
Centru de prelucrare - vertical HAAS VF-3YT
HAAS VF-3YT Вертикальный обрабатывающий центр
Obradni centar - vertikalni HAAS VF-3YT
HAAS VF-3YT Bearbetningscentrum - vertikalt
Dikey işleme merkezi HAAS VF-3YT
EN
- Languages
English (GB)