| Manufacturer | Haas |
|---|---|
| Model | TM-1 |
| Year | 2003 |
| Location | USA
|
2003 Haas TM-1 vertical machining center with a full enclosure, windowed access door, 10-tool automatic tool changer, coolant system, rigid tapping, and a NexGen tramp oil separator. The machine has a generally intact exterior, with visible grime and discoloration on some surfaces and the fluid tank.
The listed travels are X 762.0 mm, Y 304.8 mm, and Z 406.4 mm. The table measures 1212.85 mm long by 266.7 mm wide. The current description identifies the machine as a TM-1P configuration and reports that it is under power. Buyer is responsible for rigging and transport; viewing is by appointment.
The included tooling and accessories comprise a Kurt 6-inch vise, a three-jaw table chuck, a 5C collet holder, CAT40 tool holders, ER32 and ER16 collets, 5C collets, and a selection of drills, taps, end mills, fixtures, and setup tools. The package also includes assorted hand tools and machining and measurement accessories. A red tool chest with organized drawers is included, with tools, collets, and small parts stored in trays and holders. Visible items show signs of use, including surface marks, wear, and some residue; the chest, trays, and organizers appear generally intact. The seller describes the tooling as a professional set that has been inspected and kept sorted and cleaned.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
2003 Haas TM-1 vertical machining center (built April 2003), TM-1P configuration: full enclosure, 10-tool automatic tool changer, coolant system, rigid tapping, NexGen tramp oil separator.
Travels (Haas factory spec): X 30" × Y 12" × Z 16". Table 47.75" × 10.5".
Spindle hours: 6,091 (motion hours 6,626) — documented from the machine's own control screen, photo included in this listing.
Power: nameplate-rated for 208/240V single-phase OR 3-phase — runs in a home or small shop with no phase converter.
Currently under power. Shown by appointment; buyer arranges rigging and transport.
Tooling included (the package is the point): Kurt 6" vise, 8" 3-jaw table chuck, 5C collet holder, 30 CAT40 tool holders, 47 ER32 collets, 43 ER16 collets, 30 5C collets, plus a large inventory of drills, taps, end mills, fixtures and set-up tools.
Tooling condition (seller-confirmed): "The tooling is a full professional cabinet set — cutting tools, bits, holders and inserts, predominantly premium German, Swiss and Japanese brands. Everything has been kept very well sorted and cleaned, and all of it is in excellent working order. I have personally inspected the complete tooling inventory and confirm its condition and quality."
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Nov. 9, 2026 |
2003 Haas TM-1 vertical machining center (built April 2003), TM-1P configuration: full enclosure, 10-tool automatic tool changer, coolant system, rigid tapping, NexGen tramp oil separator.
Travels (Haas factory spec): X 30" × Y 12" × Z 16". Table 47.75" × 10.5".
Spindle hours: 6,091 (motion hours 6,626) — documented from the machine's own control screen, photo included in this listing.
Power: nameplate-rated for 208/240V single-phase OR 3-phase — runs in a home or small shop with no phase converter.
Currently under power. Shown by appointment; buyer arranges rigging and transport.
Tooling included (the package is the point): Kurt 6" vise, 8" 3-jaw table chuck, 5C collet holder, 30 CAT40 tool holders, 47 ER32 collets, 43 ER16 collets, 30 5C collets, plus a large inventory of drills, taps, end mills, fixtures and set-up tools.
Tooling condition (seller-confirmed): "The tooling is a full professional cabinet set — cutting tools, bits, holders and inserts, predominantly premium German, Swiss and Japanese brands. Everything has been kept very well sorted and cleaned, and all of it is in excellent working order. I have personally inspected the complete tooling inventory and confirm its condition and quality."
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
2003 Haas TM-1 vertical machining center with a full enclosure, windowed access door, 10-tool automatic tool changer, coolant system, rigid tapping, and a NexGen tramp oil separator. The machine has a generally intact exterior, with visible grime and discoloration on some surfaces and the fluid tank.
The listed travels are X 762.0 mm, Y 304.8 mm, and Z 406.4 mm. The table measures 1212.85 mm long by 266.7 mm wide. The current description identifies the machine as a TM-1P configuration and reports that it is under power. Buyer is responsible for rigging and transport; viewing is by appointment.
The included tooling and accessories comprise a Kurt 6-inch vise, a three-jaw table chuck, a 5C collet holder, CAT40 tool holders, ER32 and ER16 collets, 5C collets, and a selection of drills, taps, end mills, fixtures, and setup tools. The package also includes assorted hand tools and machining and measurement accessories. A red tool chest with organized drawers is included, with tools, collets, and small parts stored in trays and holders. Visible items show signs of use, including surface marks, wear, and some residue; the chest, trays, and organizers appear generally intact. The seller describes the tooling as a professional set that has been inspected and kept sorted and cleaned.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Nov. 9, 2026 |
CNC фрезова машина с неподвижна станина Haas TM-1
CNC ložová frézka Haas TM-1
Haas TM-1 CNC planfræsemaskine med fast bord
Haas TM-1 CNC Bettfräsmaschine
Φρέζα CNC σταθερής κλίνης Haas TM-1
2003 Haas TM-1 CNC Mill — Full Enclosure, 10-Tool ATC, 6,091 Spindle Hours, Huge Tooling Package, Single-Phase Ready
Fresadora CNC de bancada fija Haas TM-1
Fraiseuse CNC à banc fixe Haas TM-1
CNC glodalica s nepomičnim ležištem Haas TM-1
Haas TM-1 CNC ágyas marógép
Fresatrice CNC a banco fisso Haas TM-1
Haas TM-1 CNC frezavimo staklė su fiksuota lova
Haas TM-1 CNC bedfreesmachine
Frezarka CNC łożowa Haas TM-1
Fresadora CNC de bancada fixa Haas TM-1
Mașină de frezat CNC cu banc fix Haas TM-1
Haas TM-1 Фрезерный станок с неподвижной станиной с ЧПУ
CNC glodalica sa nepokretnim ležištem Haas TM-1
Haas TM-1 CNC bäddfräsmaskin
CNC sabit tablalı freze tezgâhı Haas TM-1
EN
- Languages
English (GB)