Contact us to receive an offer.
| Manufacturer | Haas |
|---|---|
| Model | Mini Mill 2 |
| Year | 2007 |
| Location | United Kingdom
|
This listing features a Haas Mini Mill 2 vertical machining center, manufactured in 2007. The machine is designed for precision machining with a compact footprint, measuring 2007 mm in length, 2210 mm in width, and 2794 mm in height, and weighing approximately 1814 kg. It offers a working envelope with axis travels of 508 mm (X), 406 mm (Y), and 356 mm (Z), supported by a table sized 1016 mm by 356 mm. The table includes three T-slots, each 16 mm wide, to facilitate secure workpiece mounting.
The Mini Mill 2 is equipped with a spindle motor delivering 5.59 kW of power, capable of reaching a maximum spindle speed of 6000 rpm. It supports tool holders of type BT40 and features a tool changer with a capacity of 20 tool pockets. The machine can accommodate tools with a maximum diameter of 89 mm and a maximum weight of 5.4 kg. Rapid feed rates reach up to 15.2 m/min, with cutting speeds around 12.7 m/min.
The machine's height clearance under the spindle ranges from 102 mm to 457 mm, allowing for a variety of part sizes. The control system is a HAAS controller, with a control panel located on the right side of the machine, featuring a screen and multiple buttons for operation. Additionally, two handheld control pendant devices are included, hanging on the front side of the machine for convenient manual control.
The machine's exterior appears clean with minor wear marks visible, indicating it has been maintained with care. The door of the machining center can be opened to access the worktable and spindle area easily. This unit is offered as-is, where-is, without additional guarantees regarding its operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer Title: Haas Mini Mill 2 Vertical Machining Center
Manufacturer: Haas
Model: Mini Mill 2
Year of Manufacture: 2007
Technical Condition: As-is, where-is
Control: HAAS
Cutting Speed: 12.7 m/minute
Machine Dimensions: 2007 x 2210 x 2794 mm
Machine Weight: 1814 kg
Maximum Tool Diameter: 89 mm
Maximum Tool Weight: 5.4 kg
Min - Max Height under Spindle: 102 - 457 mm
Rapid Feedrates: 15.2 m/minute
Spindle Motor Power: 7.5 Hp
Spindle Speed: 6000 rpm
T-Slots: 3 x 16 mm
Table Size: 1016 x 356 mm
Tool Change Capacity: 20 Station
Tool Change Time (Chip to Chip): 5 seconds
Tool Size: BT40
Traverses XYZ: 508 x 406 x 356 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What are the BB traverses of this HAAS Mini Mill 2?
This HAAS Mini Mill 2 vertical machining center has BB traverses of 508 x 406 x 356 mm.
What is the table size of the machine?
This HAAS Mini Mill 2 features a table size of 1016 x 353 mm.
What type of spindle taper does this model have?
This HAAS Mini Mill 2 is equipped with a BT40 spindle taper.
What is the power of the spindle motor in this machine?
This HAAS Mini Mill 2 has a 20 Hp spindle motor.
What is the maximum spindle speed of this model?
This HAAS Mini Mill 2 offers a spindle speed of 6000 rpm.
How many stations does the automatic tool changer have?
This HAAS Mini Mill 2 includes a 20 station automatic tool changer (ATC).
What control system is used in this HAAS Mini Mill 2?
This HAAS Mini Mill 2 is equipped with HAAS control.
Does this machine come with a coolant system?
This HAAS Mini Mill 2 includes a coolant system.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 178 |
| Last activity | Oct. 30, 2026 |
Offer Title: Haas Mini Mill 2 Vertical Machining Center
Manufacturer: Haas
Model: Mini Mill 2
Year of Manufacture: 2007
Technical Condition: As-is, where-is
Control: HAAS
Cutting Speed: 12.7 m/minute
Machine Dimensions: 2007 x 2210 x 2794 mm
Machine Weight: 1814 kg
Maximum Tool Diameter: 89 mm
Maximum Tool Weight: 5.4 kg
Min - Max Height under Spindle: 102 - 457 mm
Rapid Feedrates: 15.2 m/minute
Spindle Motor Power: 7.5 Hp
Spindle Speed: 6000 rpm
T-Slots: 3 x 16 mm
Table Size: 1016 x 356 mm
Tool Change Capacity: 20 Station
Tool Change Time (Chip to Chip): 5 seconds
Tool Size: BT40
Traverses XYZ: 508 x 406 x 356 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What are the BB traverses of this HAAS Mini Mill 2?
This HAAS Mini Mill 2 vertical machining center has BB traverses of 508 x 406 x 356 mm.
What is the table size of the machine?
This HAAS Mini Mill 2 features a table size of 1016 x 353 mm.
What type of spindle taper does this model have?
This HAAS Mini Mill 2 is equipped with a BT40 spindle taper.
What is the power of the spindle motor in this machine?
This HAAS Mini Mill 2 has a 20 Hp spindle motor.
What is the maximum spindle speed of this model?
This HAAS Mini Mill 2 offers a spindle speed of 6000 rpm.
How many stations does the automatic tool changer have?
This HAAS Mini Mill 2 includes a 20 station automatic tool changer (ATC).
What control system is used in this HAAS Mini Mill 2?
This HAAS Mini Mill 2 is equipped with HAAS control.
Does this machine come with a coolant system?
This HAAS Mini Mill 2 includes a coolant system.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing features a Haas Mini Mill 2 vertical machining center, manufactured in 2007. The machine is designed for precision machining with a compact footprint, measuring 2007 mm in length, 2210 mm in width, and 2794 mm in height, and weighing approximately 1814 kg. It offers a working envelope with axis travels of 508 mm (X), 406 mm (Y), and 356 mm (Z), supported by a table sized 1016 mm by 356 mm. The table includes three T-slots, each 16 mm wide, to facilitate secure workpiece mounting.
The Mini Mill 2 is equipped with a spindle motor delivering 5.59 kW of power, capable of reaching a maximum spindle speed of 6000 rpm. It supports tool holders of type BT40 and features a tool changer with a capacity of 20 tool pockets. The machine can accommodate tools with a maximum diameter of 89 mm and a maximum weight of 5.4 kg. Rapid feed rates reach up to 15.2 m/min, with cutting speeds around 12.7 m/min.
The machine's height clearance under the spindle ranges from 102 mm to 457 mm, allowing for a variety of part sizes. The control system is a HAAS controller, with a control panel located on the right side of the machine, featuring a screen and multiple buttons for operation. Additionally, two handheld control pendant devices are included, hanging on the front side of the machine for convenient manual control.
The machine's exterior appears clean with minor wear marks visible, indicating it has been maintained with care. The door of the machining center can be opened to access the worktable and spindle area easily. This unit is offered as-is, where-is, without additional guarantees regarding its operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 178 |
| Last activity | Oct. 30, 2026 |
Вертикален обработващ център Haas Mini Mill 2
Vertikální obráběcí centrum Haas Mini Mill 2
Haas Mini Mill 2 Lodret bearbejdningscenter
Haas Mini Mill 2 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Haas Mini Mill 2
Haas Mini Mill 2 Vertical machining center
Centro de mecanizado vertical Haas Mini Mill 2
Centre d'usinage vertical Haas Mini Mill 2
Vertikalni obradni centar Haas Mini Mill 2
Haas Mini Mill 2 Függőleges megmunkáló központ
Centro di lavoro verticale Haas Mini Mill 2
Vertikalus apdirbimo centras Haas Mini Mill 2
Haas Mini Mill 2 Verticaal bewerkingscentrum
Pionowe centrum obróbcze Haas Mini Mill 2
Centro de usinagem vertical Haas Mini Mill 2
Centru de prelucrare vertical Haas Mini Mill 2
Haas Mini Mill 2 Вертикальный обрабатывающий центр
Vertikalni obradni centar Haas Mini Mill 2
Haas Mini Mill 2 Vertikalt bearbetningscenter
Dikey işleme merkezi Haas Mini Mill 2
EN
- Languages
English (GB)