Contact us to receive an offer.
| Manufacturer | HAAS |
|---|---|
| Model | FV-1 |
| Year | 2015 |
| Location | Poland
|
This HAAS FV-1 vertical machining center, manufactured in 2015, offers robust capabilities for precision machining tasks. It features a worktable measuring 660 mm in length by 356 mm in width, with T-slots sized at 16 mm by 3, allowing secure clamping of workpieces. The table can support a maximum part weight of 1361 kg, accommodating heavy-duty machining operations.
The machine provides substantial axis travels with 508 mm on the X-axis, 406 mm on the Y-axis, and 508 mm on the Z-axis, enabling versatile machining of complex parts. The distance from the table surface to the spindle face ranges from 102 mm to 610 mm, allowing for a variety of workpiece sizes.
Equipped with a BT/ISO 40 spindle taper, the spindle reaches speeds up to 8100 rpm, driven by an inline direct-drive system. The spindle motor delivers 22.4 kW temporary power and 11 kW permanent power, with a maximum torque of 122 Nm at 2000 rpm, supporting efficient cutting performance.
Tool management is handled by a carousel tool changer mounted on the left side, capable of holding up to 20 tools. The maximum tool diameter accommodated is 89 mm, with a maximum tool length of 250 mm, suitable for a wide range of tooling requirements.
The machining center features an enclosed work area with dual front doors fitted with windows for operator safety and visibility. The interior includes a worktable equipped with a vise, and signs of active use such as metal chips and coolant residue are present. A coolant collection system with a chute leading to a collection bucket is integrated to manage fluids effectively.
Additional observed accessories include a shelf attached to the left side holding various tools like hammers and wrenches, and wrenches hanging below the control panel. The control panel itself is equipped with a display screen showing machine operation data and programming, as well as emergency stop and cycle start/feed hold buttons for operational control.
The machine appears clean and well-maintained with no visible damage, though minor signs of use are evident on the base and components. The rear side shows cables, hoses, and a coolant filter, indicating a complete setup ready for production. Electrical specifications include 354-488 V, 3-phase, 50/60 Hz, with full load current of 40 amps and a largest load of 70 amps. The unit is built with a NEMA type 1 enclosure for indoor use and is made in the USA.
Overall, this HAAS FV-1 machining center combines substantial working envelope, powerful spindle capabilities, and practical tool management in a well-maintained package suitable for various machining applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Condition: Good
Table size 660x356mm
T-slot dimension 16mm x 3
Max. Table load 1361kg
Offsets
X axis travel 508mm
Y axis travel 406mm
Z axis travel 508mm
Distance from table surface to spindle face 102-610mm
Spindle
Spindle taper BT/ISO 40
Spindle speed 8100 rpm
Drive type Inline Direct - Drive
Spindle motor 22.4kW temporary power / 11kW permanent power
Max. Torque / at 2000 rpm / 122Nm
Tool storage
Number of tools in the magazine 20 tools
Max. Tool diameter 89mm
Max. Tool length 250mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 2 |
| Last activity | Oct. 30, 2026 |
Condition: Good
Table size 660x356mm
T-slot dimension 16mm x 3
Max. Table load 1361kg
Offsets
X axis travel 508mm
Y axis travel 406mm
Z axis travel 508mm
Distance from table surface to spindle face 102-610mm
Spindle
Spindle taper BT/ISO 40
Spindle speed 8100 rpm
Drive type Inline Direct - Drive
Spindle motor 22.4kW temporary power / 11kW permanent power
Max. Torque / at 2000 rpm / 122Nm
Tool storage
Number of tools in the magazine 20 tools
Max. Tool diameter 89mm
Max. Tool length 250mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This HAAS FV-1 vertical machining center, manufactured in 2015, offers robust capabilities for precision machining tasks. It features a worktable measuring 660 mm in length by 356 mm in width, with T-slots sized at 16 mm by 3, allowing secure clamping of workpieces. The table can support a maximum part weight of 1361 kg, accommodating heavy-duty machining operations.
The machine provides substantial axis travels with 508 mm on the X-axis, 406 mm on the Y-axis, and 508 mm on the Z-axis, enabling versatile machining of complex parts. The distance from the table surface to the spindle face ranges from 102 mm to 610 mm, allowing for a variety of workpiece sizes.
Equipped with a BT/ISO 40 spindle taper, the spindle reaches speeds up to 8100 rpm, driven by an inline direct-drive system. The spindle motor delivers 22.4 kW temporary power and 11 kW permanent power, with a maximum torque of 122 Nm at 2000 rpm, supporting efficient cutting performance.
Tool management is handled by a carousel tool changer mounted on the left side, capable of holding up to 20 tools. The maximum tool diameter accommodated is 89 mm, with a maximum tool length of 250 mm, suitable for a wide range of tooling requirements.
The machining center features an enclosed work area with dual front doors fitted with windows for operator safety and visibility. The interior includes a worktable equipped with a vise, and signs of active use such as metal chips and coolant residue are present. A coolant collection system with a chute leading to a collection bucket is integrated to manage fluids effectively.
Additional observed accessories include a shelf attached to the left side holding various tools like hammers and wrenches, and wrenches hanging below the control panel. The control panel itself is equipped with a display screen showing machine operation data and programming, as well as emergency stop and cycle start/feed hold buttons for operational control.
The machine appears clean and well-maintained with no visible damage, though minor signs of use are evident on the base and components. The rear side shows cables, hoses, and a coolant filter, indicating a complete setup ready for production. Electrical specifications include 354-488 V, 3-phase, 50/60 Hz, with full load current of 40 amps and a largest load of 70 amps. The unit is built with a NEMA type 1 enclosure for indoor use and is made in the USA.
Overall, this HAAS FV-1 machining center combines substantial working envelope, powerful spindle capabilities, and practical tool management in a well-maintained package suitable for various machining applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 2 |
| Last activity | Oct. 30, 2026 |
Обработващ център - вертикален HAAS FV-1
Obráběcí centrum - vertikální HAAS FV-1
HAAS FV-1 Bearbejdningscenter - lodret
HAAS FV-1 Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο HAAS FV-1
HAAS FV-1 Machining center - vertical
Centro de mecanizado vertical HAAS FV-1
Centre d'usinage vertical HAAS FV-1
Obradni centar - vertikalni HAAS FV-1
HAAS FV-1 Megmunkáló központ - függőleges
Centro di lavoro verticale HAAS FV-1
Apdirbimo centras – vertikalus HAAS FV-1
HAAS FV-1 Bewerkingscentrum - verticaal
Pionowe centrum obróbcze HAAS FV-1
Centro de usinagem - vertical HAAS FV-1
Centru de prelucrare - vertical HAAS FV-1
HAAS FV-1 Вертикальный обрабатывающий центр
Obradni centar - vertikalni HAAS FV-1
HAAS FV-1 Bearbetningscentrum - vertikalt
Dikey işleme merkezi HAAS FV-1
EN
- Languages
English (GB)