Contact us to receive an offer.
| Category | Forging - Mechanical presses |
| Power in tons | 400 T |
| Table length | 2000 mm |
| Table width | 1525 mm |
| Ram stroke | 200 mm |
| Nbr of strokes/min | 80 |
| Working speed | 50 mm/s |
| Engine Power | 78 kW |
| Length x width x height | 4810.0 × 2830.0 × 5770.0 |
| Weight | 51 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 18/11/2026 |
| Product id | P261118017 |
| Language |
GRÄBENER GMO 2-400-2000-200 mechanical press for forging, manufactured in 2000. The machine is offered in as-is, where-is condition. No additional condition or operational information is provided.
The press has a stated total pressing force of 400 t. Ram stroke is 200 mm, with ram adjustment of 150 mm. The stated shut height, with the stroke down and adjustment up, is 700 mm. The table clamping area is approximately 2,000 × 1,525 mm, and the ram clamping area is approximately 2,145 × 1,200 mm.
The distance between uprights is 2,150 mm from left to right and 1,050 mm from side to side. The listed operating rate is 20–80 strokes per minute. Main drive power requirement is 78 kW, and the stated oil capacity is approximately 185 l.
Overall dimensions are listed as 4,810 × 2,830 × 5,770 mm (L × W × H). The stated height above floor is approximately 5,000 mm, with approximately 700 mm below floor. Machine weight is approximately 51 t.
These specifications are presented as provided in the product information. Approximate values are identified as such; no other accessories, controls, tooling, or condition details are specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: GRÄBENER
Model: GMO 2-400-2000-200
Year of manufacture: 2000
Technical condition: As-is, where-is
Total pressing force: 400 t
Ram stroke: 200 mm
Ram adjustment: 150 mm
Shut height (stroke down, adjustment up): 700 mm
Table clamping area: approx. 2,000 × 1,525 mm
Ram clamping area: approx. 2,145 × 1,200 mm
Distance between uprights, left to right: 2,150 mm
Distance between uprights, side to side: 1,050 mm
Strokes per minute: 20–80 min⁻¹
Main drive power requirement: 78 kW
Overall dimensions (L × W × H): 4,810 × 2,830 × 5,770 mm
Height above floor: approx. 5,000 mm
Height below floor: approx. 700 mm
Oil capacity: approx. 185 l
Machine weight: approx. 51 t
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 20 |
| Last activity | Nov. 19, 2026 |
Manufacturer: GRÄBENER
Model: GMO 2-400-2000-200
Year of manufacture: 2000
Technical condition: As-is, where-is
Total pressing force: 400 t
Ram stroke: 200 mm
Ram adjustment: 150 mm
Shut height (stroke down, adjustment up): 700 mm
Table clamping area: approx. 2,000 × 1,525 mm
Ram clamping area: approx. 2,145 × 1,200 mm
Distance between uprights, left to right: 2,150 mm
Distance between uprights, side to side: 1,050 mm
Strokes per minute: 20–80 min⁻¹
Main drive power requirement: 78 kW
Overall dimensions (L × W × H): 4,810 × 2,830 × 5,770 mm
Height above floor: approx. 5,000 mm
Height below floor: approx. 700 mm
Oil capacity: approx. 185 l
Machine weight: approx. 51 t
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Mechanical presses |
| Power in tons | 400 T |
| Table length | 2000 mm |
| Table width | 1525 mm |
| Ram stroke | 200 mm |
| Nbr of strokes/min | 80 |
| Working speed | 50 mm/s |
| Engine Power | 78 kW |
| Length x width x height | 4810.0 × 2830.0 × 5770.0 |
| Weight | 51 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 18/11/2026 |
| Product id | P261118017 |
| Language |
GRÄBENER GMO 2-400-2000-200 mechanical press for forging, manufactured in 2000. The machine is offered in as-is, where-is condition. No additional condition or operational information is provided.
The press has a stated total pressing force of 400 t. Ram stroke is 200 mm, with ram adjustment of 150 mm. The stated shut height, with the stroke down and adjustment up, is 700 mm. The table clamping area is approximately 2,000 × 1,525 mm, and the ram clamping area is approximately 2,145 × 1,200 mm.
The distance between uprights is 2,150 mm from left to right and 1,050 mm from side to side. The listed operating rate is 20–80 strokes per minute. Main drive power requirement is 78 kW, and the stated oil capacity is approximately 185 l.
Overall dimensions are listed as 4,810 × 2,830 × 5,770 mm (L × W × H). The stated height above floor is approximately 5,000 mm, with approximately 700 mm below floor. Machine weight is approximately 51 t.
These specifications are presented as provided in the product information. Approximate values are identified as such; no other accessories, controls, tooling, or condition details are specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 20 |
| Last activity | Nov. 19, 2026 |