| Manufacturer | Goring-Kerr |
|---|---|
| Model | DSP 2 |
| Year | |
| Location | USA
|
This listing is for one used Goring-Kerr Model DSP 2 Metal Detector with Reject system, designed for industrial metal detection applications. The unit features a powered conveyor belt measuring approximately 1828.8 mm (72 inches) in length and 762 mm (30 inches) in width, with a white plastic conveyor belt composed of chain links. The conveyor is supported by a robust stainless steel frame that provides structural stability for the entire system. The metal detector tunnel has an aperture width of 127 mm (5 inches) and a height of 254 mm (10 inches), allowing for product flow from left to right as viewed from the operator's panel. The conveyor elevation is adjustable, with an approximate height of 914 mm (36 inches).
The system is equipped with a Baldor-Reliance ½ HP motor that drives the conveyor belt. Pneumatic components are installed beneath the conveyor belt, including what appears to be a green cylindrical air tank, which is likely part of the pneumatic rejection mechanism. The rejection system is designed to remove detected contaminated products efficiently.
The control panel is mounted on top of the machine and housed in stainless steel with visible screws on the corners. It features multiple buttons labeled FAULT, LEARN, PRODUCT, FUNCTION, DETECT, ALARM RESET, and TEST, along with a central display screen surrounded by arrow buttons for menu navigation. Above the control panel, there is a yellow tape label marked "METAL DETECTOR". A signal tower light with green and white indicators is mounted on top of the control panel to provide visual status alerts. Electrical cables are routed from the control box beneath the conveyor.
Overall, the machine measures approximately 1828.8 mm (72 inches) in length, 762 mm (30 inches) in width, and 1828.8 mm (72 inches) in height. It operates on 110 Volt, single-phase, 60 Hz electrical power. This metal detector system is suitable for integration into production lines requiring reliable metal contamination detection and automated rejection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
One (1) used Goring-Kerr Model DSP 2 Metal Detector with Reject. This unit features 3” wide x 72” long powered conveyor with plastic Conveyor belt, aperture size 5” wide x 10” tall x 14” long, aperture clearance 5” wide x 9” tall, left to right product flow (from operators panel), pneumatic rejection, stainless steel frame, 36” Conveyor Elevation (adjustable), Baldor-Reliance ½ HP conveyor drive motor, stack light indicator. Electrical 110 Volt, 1 Ph, 60 Hz. Overall dimensions: 72” long x 30” wide x 72” high.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 90 |
| Last activity | Nov. 2, 2026 |
One (1) used Goring-Kerr Model DSP 2 Metal Detector with Reject. This unit features 3” wide x 72” long powered conveyor with plastic Conveyor belt, aperture size 5” wide x 10” tall x 14” long, aperture clearance 5” wide x 9” tall, left to right product flow (from operators panel), pneumatic rejection, stainless steel frame, 36” Conveyor Elevation (adjustable), Baldor-Reliance ½ HP conveyor drive motor, stack light indicator. Electrical 110 Volt, 1 Ph, 60 Hz. Overall dimensions: 72” long x 30” wide x 72” high.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for one used Goring-Kerr Model DSP 2 Metal Detector with Reject system, designed for industrial metal detection applications. The unit features a powered conveyor belt measuring approximately 1828.8 mm (72 inches) in length and 762 mm (30 inches) in width, with a white plastic conveyor belt composed of chain links. The conveyor is supported by a robust stainless steel frame that provides structural stability for the entire system. The metal detector tunnel has an aperture width of 127 mm (5 inches) and a height of 254 mm (10 inches), allowing for product flow from left to right as viewed from the operator's panel. The conveyor elevation is adjustable, with an approximate height of 914 mm (36 inches).
The system is equipped with a Baldor-Reliance ½ HP motor that drives the conveyor belt. Pneumatic components are installed beneath the conveyor belt, including what appears to be a green cylindrical air tank, which is likely part of the pneumatic rejection mechanism. The rejection system is designed to remove detected contaminated products efficiently.
The control panel is mounted on top of the machine and housed in stainless steel with visible screws on the corners. It features multiple buttons labeled FAULT, LEARN, PRODUCT, FUNCTION, DETECT, ALARM RESET, and TEST, along with a central display screen surrounded by arrow buttons for menu navigation. Above the control panel, there is a yellow tape label marked "METAL DETECTOR". A signal tower light with green and white indicators is mounted on top of the control panel to provide visual status alerts. Electrical cables are routed from the control box beneath the conveyor.
Overall, the machine measures approximately 1828.8 mm (72 inches) in length, 762 mm (30 inches) in width, and 1828.8 mm (72 inches) in height. It operates on 110 Volt, single-phase, 60 Hz electrical power. This metal detector system is suitable for integration into production lines requiring reliable metal contamination detection and automated rejection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 90 |
| Last activity | Nov. 2, 2026 |
Металодетектор Goring-Kerr DSP 2 с функция за отхвърляне
Detektor kovů Goring-Kerr DSP 2 s funkcí vyřazení
Goring-Kerr DSP 2 metaldetektor med udskilningsfunktion
Goring-Kerr DSP 2 Metalldetektor mit Aussortierfunktion
Ανιχνευτής μετάλλων Goring-Kerr DSP 2 με σύστημα απόρριψης
Goring-Kerr DSP 2 Metal Detector with Reject
Detector de metales Goring-Kerr DSP 2 con sistema de rechazo
Détecteur de métaux Goring-Kerr DSP 2 avec système de rejet
Goring-Kerr DSP 2 detektor metala s odbačajem
Goring-Kerr DSP 2 fémdetektor kiszűrővel
Metal detector Goring-Kerr DSP 2 con sistema di scartamento
Metalo detektorius „Goring-Kerr DSP 2“ su atmetimo funkcija
Goring-Kerr DSP 2 metaaldetector met uitsorteerfunctie
Wykrywacz metali Goring-Kerr DSP 2 z funkcją odrzucania
Detetor de metais Goring-Kerr DSP 2 com sistema de rejeição
Detector de metale Goring-Kerr DSP 2 cu funcție de respingere
Металлоискатель Goring-Kerr DSP 2 с функцией отбраковки
Goring-Ker DSP 2 metalni detektor sa odbacivanjem
Goring-Kerr DSP 2 metalldetektor med utsorteringsfunktion
Goring-Kerr DSP 2 Reddetme Özellikli Metal Dedektörü
EN
- Languages
English (GB)