| Manufacturer | Gleason Pfauter |
|---|---|
| Model | P400G CNC Gear Grinder |
| Year | 2001 |
| Location | USA
|
This listing is for a Gleason Pfauter P400G CNC Gear Grinder, manufactured in 2001. It is a 5-axis CNC gear grinding machine designed for precision gear manufacturing and finishing. The machine accommodates a maximum workpiece diameter of 400 mm (15.74 inches) and can grind profiles up to 35 mm (1.37 inches) deep. It supports grinding wheels up to 350 mm (13.77 inches) in diameter and 50 mm (1.96 inches) in width, with a spindle journal diameter for retaining of 80 mm (3.14 inches).
The machine features extensive travel capabilities with X-axis (radial) travel of 440 mm (17.32 inches), Y-axis (tangential) travel of 200 mm (7.87 inches), and Z-axis (axial) travel of 400 mm (15.74 inches). The grinding head can pivot up to ±40°, enhancing versatility for complex gear shapes. The worktable has a diameter of 380 mm (14.96 inches) and a bore of 80 mm (3.14 inches), with a maximum load capacity of 10 kN (2,248 lbs). The tailstock offers a travel distance of 650 mm (25.59 inches) and a locating bore of 90 mm (3.54 inches).
Feed and rapid traverse rates are up to 10,000 mm/min (393.7 IPM) for both X and Z axes, and 5,000 mm/min (196.85 IPM) for the Y-axis. The spindle speed ranges from 600 to 6,000 RPM, while the worktable (C-axis) speed is adjustable up to 32 mm/min (1.25 IPM). The dresser spindle speed ranges from 3,000 to 6,000 RPM with a maximum dressing wheel diameter of 150 mm (5.9 inches).
The machine is equipped with a Siemens SINUMERIK control panel featuring buttons, knobs, and a display screen, providing advanced CNC control. It is housed in a blue and white enclosure with visible hydraulic and pneumatic lines. Safety is addressed with multiple warning labels on the machine, including no-smoking signs, and caution labels inside the grinding chamber.
The machine is located in a clean and orderly workshop environment. While the exterior shows slight signs of wear and some dirt marks, there are minor rust stains on the lower white parts of the machine. The grinding chamber displays some signs of use with minor wear and dirt but no visible damage to the control panel, which appears intact and well-maintained.
Approximate machine dimensions are 144 inches (length) x 102 inches (depth) x 120 inches (height). The filtration system measures approximately 72 inches x 136 inches x 99 inches, and the control cabinet dimensions are roughly 42 inches x 72 inches x 88 inches.
This gear grinder operates on 460 V, 60 Hz with a connected load of 70 kVA. A detailed gear measurement report dated February 2024 is available, providing numerical data and charts related to gear inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Type: Gear Grinders
Model: P400G
Brand: GLEASON PFAUTER
Condition: Used
Year: 2001
Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder
Maximum Workpiece Diameter: 400 mm / 15.74”
Maximum Grindable Profile Depth: 35 mm / 1.37”
Maximum Grinding Wheel Diameter: 350 mm / 13.77”
Maximum Grinding Wheel Width: 50 mm / 1.96”
Diameter of the Spindle Journal for Retaining: 80 mm / 3.14”
X-Axis Travel (Radial): 440 mm / 17.32”
Y-Axis Travel (Tangential): 200 mm / 7.87”
Z-Axis Travel (Axial): 400 mm / 15.74”
Maximum Grinding Head Pivoting Angle (+A-A): +/- 40°
Maximum Table Load: 10 kN / 2,248 Lbs.
Worktable Diameter: 380 mm / 14.96”
Worktable Bore: 80 mm / 3.14”
Tailstock Travel Distance: 650 mm / 25.59”
Tailstock Locating Bore: 90 mm / 3.54”
Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM
Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM
Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM
Tool Speed (Spindle-S): 600 to 6,000 RPM
Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM
Dresser Travel Distance (Z2-Axis): 200 mm / 7.87”
Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM
Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM
Maximum Dressing Wheel Diameter: 150 mm / 5.90”
Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height
Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height
Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 1 |
| Last activity | Aug. 31, 2026 |
Type: Gear Grinders
Model: P400G
Brand: GLEASON PFAUTER
Condition: Used
Year: 2001
Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder
Maximum Workpiece Diameter: 400 mm / 15.74”
Maximum Grindable Profile Depth: 35 mm / 1.37”
Maximum Grinding Wheel Diameter: 350 mm / 13.77”
Maximum Grinding Wheel Width: 50 mm / 1.96”
Diameter of the Spindle Journal for Retaining: 80 mm / 3.14”
X-Axis Travel (Radial): 440 mm / 17.32”
Y-Axis Travel (Tangential): 200 mm / 7.87”
Z-Axis Travel (Axial): 400 mm / 15.74”
Maximum Grinding Head Pivoting Angle (+A-A): +/- 40°
Maximum Table Load: 10 kN / 2,248 Lbs.
Worktable Diameter: 380 mm / 14.96”
Worktable Bore: 80 mm / 3.14”
Tailstock Travel Distance: 650 mm / 25.59”
Tailstock Locating Bore: 90 mm / 3.54”
Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM
Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM
Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM
Tool Speed (Spindle-S): 600 to 6,000 RPM
Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM
Dresser Travel Distance (Z2-Axis): 200 mm / 7.87”
Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM
Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM
Maximum Dressing Wheel Diameter: 150 mm / 5.90”
Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height
Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height
Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Gleason Pfauter P400G CNC Gear Grinder, manufactured in 2001. It is a 5-axis CNC gear grinding machine designed for precision gear manufacturing and finishing. The machine accommodates a maximum workpiece diameter of 400 mm (15.74 inches) and can grind profiles up to 35 mm (1.37 inches) deep. It supports grinding wheels up to 350 mm (13.77 inches) in diameter and 50 mm (1.96 inches) in width, with a spindle journal diameter for retaining of 80 mm (3.14 inches).
The machine features extensive travel capabilities with X-axis (radial) travel of 440 mm (17.32 inches), Y-axis (tangential) travel of 200 mm (7.87 inches), and Z-axis (axial) travel of 400 mm (15.74 inches). The grinding head can pivot up to ±40°, enhancing versatility for complex gear shapes. The worktable has a diameter of 380 mm (14.96 inches) and a bore of 80 mm (3.14 inches), with a maximum load capacity of 10 kN (2,248 lbs). The tailstock offers a travel distance of 650 mm (25.59 inches) and a locating bore of 90 mm (3.54 inches).
Feed and rapid traverse rates are up to 10,000 mm/min (393.7 IPM) for both X and Z axes, and 5,000 mm/min (196.85 IPM) for the Y-axis. The spindle speed ranges from 600 to 6,000 RPM, while the worktable (C-axis) speed is adjustable up to 32 mm/min (1.25 IPM). The dresser spindle speed ranges from 3,000 to 6,000 RPM with a maximum dressing wheel diameter of 150 mm (5.9 inches).
The machine is equipped with a Siemens SINUMERIK control panel featuring buttons, knobs, and a display screen, providing advanced CNC control. It is housed in a blue and white enclosure with visible hydraulic and pneumatic lines. Safety is addressed with multiple warning labels on the machine, including no-smoking signs, and caution labels inside the grinding chamber.
The machine is located in a clean and orderly workshop environment. While the exterior shows slight signs of wear and some dirt marks, there are minor rust stains on the lower white parts of the machine. The grinding chamber displays some signs of use with minor wear and dirt but no visible damage to the control panel, which appears intact and well-maintained.
Approximate machine dimensions are 144 inches (length) x 102 inches (depth) x 120 inches (height). The filtration system measures approximately 72 inches x 136 inches x 99 inches, and the control cabinet dimensions are roughly 42 inches x 72 inches x 88 inches.
This gear grinder operates on 460 V, 60 Hz with a connected load of 70 kVA. A detailed gear measurement report dated February 2024 is available, providing numerical data and charts related to gear inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 1 |
| Last activity | Aug. 31, 2026 |
Зъбошлифовъчна машина Gleason Pfauter P400G CNC Gear Grinder
Bruska ozubených kol Gleason Pfauter P400G CNC Gear Grinder
Gleason Pfauter P400G CNC Gear Grinder Tandslibemaskine
Gleason Pfauter P400G CNC Gear Grinder Zahnschleifmaschine
Μηχανή λείανσης γραναζιών Gleason Pfauter P400G CNC Gear Grinder
Gleason Pfauter Model P400G CNC Gear Grinder
Rectificadora de engranajes Gleason Pfauter P400G CNC Gear Grinder
Rectifieuse d’engrenages Gleason Pfauter P400G CNC Gear Grinder
Brusilica zupčanika Gleason Pfauter P400G CNC Gear Grinder
Gleason Pfauter P400G CNC Gear Grinder Fogaskerékköszörű gép
Rettificatrice per ingranaggi Gleason Pfauter P400G CNC Gear Grinder
Gleason Pfauter P400G CNC Gear Grinder Krumpliaračių šlifavimo staklės
Gleason Pfauter P400G CNC Gear Grinder Tandslijpmachine
Szlifierka kół zębatych Gleason Pfauter P400G CNC Gear Grinder
Retificadora de engrenagens Gleason Pfauter P400G CNC Gear Grinder
Mașină de rectificat roți dințate Gleason Pfauter P400G CNC Gear Grinder
Gleason Pfauter P400G CNC Gear Grinder Зубошлифовальный станок
Brusilica zupčanika Gleason Pfauter P400G CNC Gear Grinder
Gleason Pfauter P400G CNC Gear Grinder Kugghjulsslipmaskin
Dişli taşlama makinesi Gleason Pfauter P400G CNC Gear Grinder
EN
- Languages
English (GB)