| Manufacturer | Gigant |
|---|---|
| Model | G2-500 |
| Year | 2007 |
| Location | Italy
|
| Category | Forging - Mechanical presses |
| Type | H-Frame |
| Power in tons | 500 T |
| Table length | 2000 mm |
| Table width | 2000 mm |
| Engine Power | 55 kW |
| Weight | 48000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Gigant G2-500 |
| Last availability date | 03/02/2026 |
| Product id | P251118089 |
| Language |
Механична преса Gigant G2-500
Mechanický lis Gigant G2-500
Gigant G2-500 Mekanisk presse
Gigant G2-500 Mechanische Presse
Μηχανική πρέσα Gigant G2-500
Gigant G2-500 Mechanical press
Prensa mecánica Gigant G2-500
Presse mécanique Gigant G2-500
Mehanička preša Gigant G2-500
Gigant G2-500 Mechanikus prés
Pressa Gigant 500 ton
Mechaninis presas Gigant G2-500
Gigant G2-500 Mechanische pers
Prasa mechaniczna Gigant G2-500
Prensa mecânica Gigant G2-500
Presă mecanică Gigant G2-500
Gigant G2-500 Механические прессы
Mehanička presa Gigant G2-500
Gigant G2-500 Mekanisk press
Mekanik presler Gigant G2-500
|
This Gigant G2-500 mechanical press is a robust H-Frame type machine with a pressing capacity of 500 tons. Manufactured in 2007, it features a large working table measuring 2000 x 2000 mm, providing ample space for various pressing operations. The press has a stroke length of 1,300 mm, with additional clearances including a frontal clearance between uprights of 2,010 mm, vertical clearance between open boards of 2,200 mm, and a side clearance of 920 mm. The approach and return speeds are both rated at 500 mm/sec, facilitating efficient operation cycles.
Powered by a total installed electrical power of 55 kW, the machine operates on a supply voltage of 400 V at 50 Hz. The press includes a guided hydraulic bottom plate with four cylinders and a sheet press stroke of 650 mm on a table measuring 1,700 x 1,700 mm.
The machine weighs approximately 48,000 kg and is painted blue with a red upper section. It is equipped with safety features such as a red safety mesh guard behind the working area and on the side, including a red perforated metal safety guard panel. Visible components include guide rails along the side of the press, which show signs of use but appear intact, and hydraulic hoses and fittings mounted on the side. Two pressure gauges are present, with clean and legible faces, reading approximately 400 bar and 250 bar, labeled for piston and sheet press maximum pressures respectively.
The machine is situated in a workshop environment, with some protective plastic covering on the lower table and wooden blocks placed on the flat working table. The blue painted frame has bolts visible along the edges and an electrical box mounted near the bottom. This Gigant G2-500 press is a substantial industrial machine suitable for heavy-duty pressing applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Gigant Brand
Model G2-500
Capacity 500 ton
Stroke 1,300 mm
Table 2,000 x 2,000 mm
Mace 2,000 x 2,000 mm
Frontal clearance between uprights 2,010 mm
Vertical clearance between open boards 2,200 mm
Side clearance 920 mm
Approach speed 500 mm/sec
Return speed 500 mm/sec
Guided hydraulic bottom plate press (No. 4 cylinders)
Sheet press stroke 650 mm
Sheet press table 1,700 x 1,700
Total installed electrical power 55 + 55 + 8 kW
Supply voltage 400 / 50 Volts / Hz
Weight 48,000 kg
Year 2007 CE
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 30 |
| Last activity | Nov. 7, 2026 |
Sidicom Group S.R.L. is a leading Italian company specializing in the trade of new and refurbished machinery for the sheet metal and swarf industries. With a strong presence in the market, Sidicom offers a comprehensive range of equipment, including mechanical and hydraulic presses, forming presses, shears, and feeder lines. Their extensive inventory also features a variety of machines such as bending rolls, punching machines, and lifting and handling equipment, catering to diverse industrial needs. Located in Limena, Padua, Sidicom Group S.R.L. operates from a fully equipped facility that ensures meticulous inspection and potential revamping of used machinery, guaranteeing compliance with current regulations. Their commitment to quality is further demonstrated through complete mechanical and electrical retrofitting services, providing clients with equipment that matches the productivity of new machines while offering cost-effective solutions. Beyond machinery sales, Sidicom Group S.R.L. offers a suite of services, including 360° complete consultancy, maintenance, compliance and safety certifications, as well as transport and installation. Their dedicated team of skilled technicians and consultants work closely with clients to identify optimal machinery solutions, ensuring seamless integration and long-term operational efficiency. With a focus on sustainable innovation and customer satisfaction, Sidicom Group S.R.L. stands as a trusted partner for businesses seeking reliable and high-quality machinery solutions in the sheet metal and swarf sectors.
Gigant Brand
Model G2-500
Capacity 500 ton
Stroke 1,300 mm
Table 2,000 x 2,000 mm
Mace 2,000 x 2,000 mm
Frontal clearance between uprights 2,010 mm
Vertical clearance between open boards 2,200 mm
Side clearance 920 mm
Approach speed 500 mm/sec
Return speed 500 mm/sec
Guided hydraulic bottom plate press (No. 4 cylinders)
Sheet press stroke 650 mm
Sheet press table 1,700 x 1,700
Total installed electrical power 55 + 55 + 8 kW
Supply voltage 400 / 50 Volts / Hz
Weight 48,000 kg
Year 2007 CE
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Mechanical presses |
| Type | H-Frame |
| Power in tons | 500 T |
| Table length | 2000 mm |
| Table width | 2000 mm |
| Engine Power | 55 kW |
| Weight | 48000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Gigant G2-500 |
| Last availability date | 03/02/2026 |
| Product id | P251118089 |
| Language |
Механична преса Gigant G2-500
Mechanický lis Gigant G2-500
Gigant G2-500 Mekanisk presse
Gigant G2-500 Mechanische Presse
Μηχανική πρέσα Gigant G2-500
Gigant G2-500 Mechanical press
Prensa mecánica Gigant G2-500
Presse mécanique Gigant G2-500
Mehanička preša Gigant G2-500
Gigant G2-500 Mechanikus prés
Pressa Gigant 500 ton
Mechaninis presas Gigant G2-500
Gigant G2-500 Mechanische pers
Prasa mechaniczna Gigant G2-500
Prensa mecânica Gigant G2-500
Presă mecanică Gigant G2-500
Gigant G2-500 Механические прессы
Mehanička presa Gigant G2-500
Gigant G2-500 Mekanisk press
Mekanik presler Gigant G2-500
|
This Gigant G2-500 mechanical press is a robust H-Frame type machine with a pressing capacity of 500 tons. Manufactured in 2007, it features a large working table measuring 2000 x 2000 mm, providing ample space for various pressing operations. The press has a stroke length of 1,300 mm, with additional clearances including a frontal clearance between uprights of 2,010 mm, vertical clearance between open boards of 2,200 mm, and a side clearance of 920 mm. The approach and return speeds are both rated at 500 mm/sec, facilitating efficient operation cycles.
Powered by a total installed electrical power of 55 kW, the machine operates on a supply voltage of 400 V at 50 Hz. The press includes a guided hydraulic bottom plate with four cylinders and a sheet press stroke of 650 mm on a table measuring 1,700 x 1,700 mm.
The machine weighs approximately 48,000 kg and is painted blue with a red upper section. It is equipped with safety features such as a red safety mesh guard behind the working area and on the side, including a red perforated metal safety guard panel. Visible components include guide rails along the side of the press, which show signs of use but appear intact, and hydraulic hoses and fittings mounted on the side. Two pressure gauges are present, with clean and legible faces, reading approximately 400 bar and 250 bar, labeled for piston and sheet press maximum pressures respectively.
The machine is situated in a workshop environment, with some protective plastic covering on the lower table and wooden blocks placed on the flat working table. The blue painted frame has bolts visible along the edges and an electrical box mounted near the bottom. This Gigant G2-500 press is a substantial industrial machine suitable for heavy-duty pressing applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 30 |
| Last activity | Nov. 7, 2026 |
Sidicom Group S.R.L. is a leading Italian company specializing in the trade of new and refurbished machinery for the sheet metal and swarf industries. With a strong presence in the market, Sidicom offers a comprehensive range of equipment, including mechanical and hydraulic presses, forming presses, shears, and feeder lines. Their extensive inventory also features a variety of machines such as bending rolls, punching machines, and lifting and handling equipment, catering to diverse industrial needs. Located in Limena, Padua, Sidicom Group S.R.L. operates from a fully equipped facility that ensures meticulous inspection and potential revamping of used machinery, guaranteeing compliance with current regulations. Their commitment to quality is further demonstrated through complete mechanical and electrical retrofitting services, providing clients with equipment that matches the productivity of new machines while offering cost-effective solutions. Beyond machinery sales, Sidicom Group S.R.L. offers a suite of services, including 360° complete consultancy, maintenance, compliance and safety certifications, as well as transport and installation. Their dedicated team of skilled technicians and consultants work closely with clients to identify optimal machinery solutions, ensuring seamless integration and long-term operational efficiency. With a focus on sustainable innovation and customer satisfaction, Sidicom Group S.R.L. stands as a trusted partner for businesses seeking reliable and high-quality machinery solutions in the sheet metal and swarf sectors.
EN
- Languages
English (GB)