Price on request
Make an offer| Power in tons | 50 T |
| Engine Power | 5 kW |
| ------------------- | |
| Weight | 1110 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 05/04/2026 |
This GEKA HYDRACROP 50 SD is a hydraulic press designed for industrial metalworking applications. It features a pressing force capacity of 50 tons, suitable for various punching and cutting tasks. The machine is equipped with a 5.0 kW motor, providing the necessary power for efficient operation. It has a punching diameter capacity of 28 mm in 13 mm thick material, round and square cutting capabilities up to 40 mm, angle iron cutting up to 120 x 120 x 10 mm, and flat bar cutting up to 200 x 20 mm. The machine weighs approximately 1110 kg, indicating a robust and stable construction.
The press includes a hydraulic ram and a metal work table with adjustable guides and clamps to position workpieces accurately. A control panel is mounted on the side, featuring toggle switches, green and red buttons, a key switch, and an emergency stop switch for operational safety and control. A yellow safety guard covers part of the working area to enhance operator protection. The machine is connected via a power cable with a red industrial plug.
Regarding condition, the machine shows signs of wear consistent with industrial use, including chipped paint and some surface rust on the lower parts and metal surfaces. Scratches and wear marks are visible on the paint and working surfaces, but no specific information about operational status or maintenance history is provided. An information plate with specifications and model details is attached to the machine body.
Overall, this GEKA HYDRACROP 50 SD hydraulic press is a heavy-duty machine suitable for punching and cutting various metal profiles, equipped with safety features and adjustable components to facilitate precise metalworking tasks.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Power (in tons) 50
Punching Ø28 in 13 mm
Round cut 40 mm
Square cut 40 mm
Angle iron 120 x 120 x 10
Flat bar 200 x 20
Motor power 5 KW
Weight 1110 Kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 78 |
| Last activity | April 18, 2026 |
Mondiale, your partner in machine tools Mondiale has a reputation as one of the leading machine tool dealers in Europe handling both used and new machinery from individual machines up to complete plants.
In 1989 Mondiale became member of Harry Vraets Machinery BV (HVM), a reputed company with a 35-year history as a worldwide trading company in big machinery (new and used).
Together, Mondiale and HVM have an extensive 15,000 m2 warehouse containing 14,000 m2 of used machinery and a 1000 m2 new machinery showroom. Mondiale is particulary known for Horizontal boring mills, Lathes, CNC Lathes, Vertical boring mills, Machining centers, Bed milling machines.
Power (in tons) 50
Punching Ø28 in 13 mm
Round cut 40 mm
Square cut 40 mm
Angle iron 120 x 120 x 10
Flat bar 200 x 20
Motor power 5 KW
Weight 1110 Kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 50 T |
| Engine Power | 5 kW |
| ------------------- | |
| Weight | 1110 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 05/04/2026 |
This GEKA HYDRACROP 50 SD is a hydraulic press designed for industrial metalworking applications. It features a pressing force capacity of 50 tons, suitable for various punching and cutting tasks. The machine is equipped with a 5.0 kW motor, providing the necessary power for efficient operation. It has a punching diameter capacity of 28 mm in 13 mm thick material, round and square cutting capabilities up to 40 mm, angle iron cutting up to 120 x 120 x 10 mm, and flat bar cutting up to 200 x 20 mm. The machine weighs approximately 1110 kg, indicating a robust and stable construction.
The press includes a hydraulic ram and a metal work table with adjustable guides and clamps to position workpieces accurately. A control panel is mounted on the side, featuring toggle switches, green and red buttons, a key switch, and an emergency stop switch for operational safety and control. A yellow safety guard covers part of the working area to enhance operator protection. The machine is connected via a power cable with a red industrial plug.
Regarding condition, the machine shows signs of wear consistent with industrial use, including chipped paint and some surface rust on the lower parts and metal surfaces. Scratches and wear marks are visible on the paint and working surfaces, but no specific information about operational status or maintenance history is provided. An information plate with specifications and model details is attached to the machine body.
Overall, this GEKA HYDRACROP 50 SD hydraulic press is a heavy-duty machine suitable for punching and cutting various metal profiles, equipped with safety features and adjustable components to facilitate precise metalworking tasks.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 78 |
| Last activity | April 18, 2026 |
Mondiale, your partner in machine tools Mondiale has a reputation as one of the leading machine tool dealers in Europe handling both used and new machinery from individual machines up to complete plants.
In 1989 Mondiale became member of Harry Vraets Machinery BV (HVM), a reputed company with a 35-year history as a worldwide trading company in big machinery (new and used).
Together, Mondiale and HVM have an extensive 15,000 m2 warehouse containing 14,000 m2 of used machinery and a 1000 m2 new machinery showroom. Mondiale is particulary known for Horizontal boring mills, Lathes, CNC Lathes, Vertical boring mills, Machining centers, Bed milling machines.
Хидравлична преса GEKA HYDRACROP 50 SD
Hydraulický lis GEKA HYDRACROP 50 SD
GEKA HYDRACROP 50 SD Hydraulisk presse
GEKA HYDRACROP 50 SD Hydraulikpresse
Υδραυλική πίεση GEKA HYDRACROP 50 SD
GEKA HYDRACROP 50 SD Hydraulic press
Prensa hidráulica GEKA HYDRACROP 50 SD
Presse hydraulique GEKA HYDRACROP 50 SD
Hidraulična preša GEKA HYDRACROP 50 SD
GEKA HYDRACROP 50 SD Hidraulikus nyomás
Pressa idraulica GEKA HYDRACROP 50 SD
Hidraulinis presas GEKA HYDRACROP 50 SD
GEKA HYDRACROP 50 SD Hydraulische pers
Prasa hydrauliczna GEKA HYDRACROP 50 SD
Pressão hidráulica GEKA HYDRACROP 50 SD
Presa hidraulica GEKA HYDRACROP 50 SD
GEKA HYDRACROP 50 SD Гидравлический пресс
Hidraulična presa GEKA HYDRACROP 50 SD
GEKA HYDRACROP 50 SD Hydraulisk press
Hidrolik Pres GEKA HYDRACROP 50 SD
EN
- Languages
English (GB)