Contact us to receive an offer.
| Manufacturer | GEA |
|---|---|
| Model | OptiFlour II 400 |
| Year | 2021 |
| Location | Poland
|
GEA OptiFlour II 400 – Flour duster / pre-coating unit designed to apply a controlled layer of flour to products prior to further processing. The machine uses a bottom conveyor to convey product under a layer of flour while a separately adjustable top dosing system applies flour from above. A vibration module assists in removing excess flour, and an integrated air blow system cleans top and bottom surfaces. Belt speed is adjustable to set processing parameters.
Key technical specifications (as provided): Manufacturer: GEA. Model: OptiFlour II 400. Machine type: Flour duster. Belt working width: 400 mm. Input width: 412 mm. Output width: 409 mm. Input height: 1060 mm (+100 / -60). Output height: 1060 mm (+100 / -110). Belt speed: 2.5–25 m/min. Maximum free space for product: 70 mm. Minimum flour volume: 60 l. Minimum product size: 16 mm. Noise level: <80 dB(A). Dimensions (L × W × H): 2700 × 1540 × 1800 mm. Weight: 700 kg. Power: 5.3 kW. Voltage: 380–415 V, Frequency: 50/60 Hz, Power supply: 3-phase, Current: 13 A. Year of manufacture: 2021. Capacity listed as None kg/h.
Construction and fitted items: stainless-steel hygienic construction; top feed hopper/inlet; top exhaust/vent outlet and short vertical discharge/duct pipes associated with the hopper; round inspection/port (porthole) and a gasketed rectangular access door with viewing panel; multiple hinged access panels and removable cover plates; several gear motors/gearboxes (including at least one unit with a blue end cap) and drive assemblies; an inline pump/gear unit and external piping/hoses (including a green flexible hose) routed along the base; a small side infeed table/chute; stainless tubular protective bars on the lower frame; tall vertical cylindrical column on the frame; red emergency stop/control push button on the front panel; yellow triangular hazard/warning labels; four swivel caster wheels with brakes for mobility.
This description compiles the supplied technical data and the listed machine components and accessories.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
GEA OptiFlour II 400 is used for pre-coating products with flour before further processing. The bottom conveyor guides the product over a layer of flour, and a separately adjustable top layer applies flour from above. A vibration system facilitates the removal of excess flour, and an air blow system cleans the top and bottom surfaces of the product. Adjustable belt speed allows for parameter adjustment. Technical specifications: Manufacturer GEA, Model OptiFlour II 400, Machine type Flour duster, Belt working width 400 mm, Input width 412 mm, Output width 409 mm, Input height 1060 +100/-60 mm, Output height 1060 +100/-110 mm, Belt speed 2.5–25 m/min, Max. free space for product 70 mm, Min. flour volume 60 l, Min. product size 16 mm, Noise level <80 dB(A), Dimensions (L × W × H) 2700 × 1540 × 1800 mm, Weight 700 kg, Power 5.3 kW, Voltage 380–415 V, Frequency 50/60 Hz, Power supply 3-phase, Current 13 A, Year of manufacture 2021.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 144 |
| Last activity | Oct. 27, 2026 |
GEA OptiFlour II 400 is used for pre-coating products with flour before further processing. The bottom conveyor guides the product over a layer of flour, and a separately adjustable top layer applies flour from above. A vibration system facilitates the removal of excess flour, and an air blow system cleans the top and bottom surfaces of the product. Adjustable belt speed allows for parameter adjustment. Technical specifications: Manufacturer GEA, Model OptiFlour II 400, Machine type Flour duster, Belt working width 400 mm, Input width 412 mm, Output width 409 mm, Input height 1060 +100/-60 mm, Output height 1060 +100/-110 mm, Belt speed 2.5–25 m/min, Max. free space for product 70 mm, Min. flour volume 60 l, Min. product size 16 mm, Noise level <80 dB(A), Dimensions (L × W × H) 2700 × 1540 × 1800 mm, Weight 700 kg, Power 5.3 kW, Voltage 380–415 V, Frequency 50/60 Hz, Power supply 3-phase, Current 13 A, Year of manufacture 2021.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
GEA OptiFlour II 400 – Flour duster / pre-coating unit designed to apply a controlled layer of flour to products prior to further processing. The machine uses a bottom conveyor to convey product under a layer of flour while a separately adjustable top dosing system applies flour from above. A vibration module assists in removing excess flour, and an integrated air blow system cleans top and bottom surfaces. Belt speed is adjustable to set processing parameters.
Key technical specifications (as provided): Manufacturer: GEA. Model: OptiFlour II 400. Machine type: Flour duster. Belt working width: 400 mm. Input width: 412 mm. Output width: 409 mm. Input height: 1060 mm (+100 / -60). Output height: 1060 mm (+100 / -110). Belt speed: 2.5–25 m/min. Maximum free space for product: 70 mm. Minimum flour volume: 60 l. Minimum product size: 16 mm. Noise level: <80 dB(A). Dimensions (L × W × H): 2700 × 1540 × 1800 mm. Weight: 700 kg. Power: 5.3 kW. Voltage: 380–415 V, Frequency: 50/60 Hz, Power supply: 3-phase, Current: 13 A. Year of manufacture: 2021. Capacity listed as None kg/h.
Construction and fitted items: stainless-steel hygienic construction; top feed hopper/inlet; top exhaust/vent outlet and short vertical discharge/duct pipes associated with the hopper; round inspection/port (porthole) and a gasketed rectangular access door with viewing panel; multiple hinged access panels and removable cover plates; several gear motors/gearboxes (including at least one unit with a blue end cap) and drive assemblies; an inline pump/gear unit and external piping/hoses (including a green flexible hose) routed along the base; a small side infeed table/chute; stainless tubular protective bars on the lower frame; tall vertical cylindrical column on the frame; red emergency stop/control push button on the front panel; yellow triangular hazard/warning labels; four swivel caster wheels with brakes for mobility.
This description compiles the supplied technical data and the listed machine components and accessories.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 144 |
| Last activity | Oct. 27, 2026 |
Машина за храна GEA OptiFlour II 400
Potravinářský stroj GEA OptiFlour II 400
GEA OptiFlour II 400 Fødevaremaskine
GEA OptiFlour II 400 Lebensmittelmaschine
Μηχανή τροφίμων GEA OptiFlour II 400
GEA OptiFlour II 400 Food processing machine
Máquina de alimentos GEA OptiFlour II 400
Machine agro-alimentaire GEA OptiFlour II 400
Stroj za hranu GEA OptiFlour II 400
GEA OptiFlour II 400 Élelmiszeripari gép
Macchina agroalimentare GEA OptiFlour II 400
GEA OptiFlour II 400 Maisto aparatas
GEA OptiFlour II 400 Voedselmachine
Maszyna do żywności GEA OptiFlour II 400
Máquina de alimentos GEA OptiFlour II 400
Mașină alimentară GEA OptiFlour II 400
GEA OptiFlour II 400 Пищевая машина
Mašina za hranu GEA OptiFlour II 400
GEA OptiFlour II 400 Matmaskin
Gıda makinesi GEA OptiFlour II 400
EN
- Languages
English (GB)