Gabler SWING Blowmoulding machine

Verified seller

Price on request

View price
Manufacturer Gabler
Model SWING
Year 2013
Location Belarus BY
Ilya
Your dedicated contact
Ilya Z.

Automatic description (AI-Generated)

The Gabler SWING thermoforming machine, manufactured in 2013 by GABLER Thermoform GmbH & Co., Germany, is designed for producing plastic cups and containers from various thermoforming polymers such as PP, PS, PET, and HIPS. This industrial blowmoulding machine features a preheating station (2heat) and utilizes a complete 8-socket mold with a stacking device, enabling efficient manufacturing of PP stacks. The machine is capable of handling a maximum forming surface area of 450 x 220 mm, with a tape width of up to 480 mm and tape thickness up to 2 mm. It can mold to a maximum depth of 125 mm.

The machine operates with a mechanical performance of 21 to 25 cycles per minute and an idle tact rate of 44 cycles per minute. It requires a three-phase AC power supply of 230/400 V at 50 Hz, with a total power consumption of 64.15 kW, and compressed air at an operating pressure of 8 bar. The maximum noise level during operation does not exceed 80 dB.

Physically, the thermoforming machine including the stacking and counting device measures 11,400 mm in length, 3,000 mm in width, and 2,870 mm in height, with a shipping weight of 8,435 kg. The control cabinet and distribution cabinet are also included in the setup.

The machine is housed in blue and white panels and is equipped with a control panel featuring buttons and a display screen for operation management. A yellow overhead arm or crane attachment is mounted on top for handling purposes. The interior contains mechanical arms, tubes, metal rods, and linear actuator mechanisms, with safety features such as yellow warning labels. The machine includes a conveyor belt system and a white perforated plastic sheet as part of its configuration.

The equipment is situated indoors on a concrete factory floor with overhead lighting. It appears clean and well-maintained, with no visible signs of damage or wear, indicating careful upkeep. The machine's operation requires connection to a three-phase AC network, compressed air, and coolant supply to function effectively.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.)
Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together).
Manufacturer: GABLER Thermoform GmbH & Co., Germany.
Date of acceptance to accounting: 04/30/2014.
Main technical characteristics:
Area of forming surface, mm Maximum - 450x220
Minimum - 430x180
Maximum width of the tape, mm 480
Maximum tape thickness, mm 2
Maximum depth of molding, mm 125
Maximum noise level, dB Not more than 80
Tact at idle, tact / min 44
Mechanical performance, cycles / min 21-25
Voltage 230 / 400V, 50Hz
Total power consumption, kW 64.15
Operating air pressure, bar 8
Dimensions (length x width x height), mm Thermoforming machine (including stacking-counting device): 6000 11400 x 3000 x 2870 (including crane)
Control cabinet: 1000 x 250 (G) x 1800,
Distribution cabinet: 1600 x 400 (G) x 1800
Shipping weight kg 8435
Operational characteristics: equipment operation requires the supply of a three-phase AC network, compressed air with a pressure of 8 Bar, and coolant.

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Client type Factory – small or medium company
Active since 2019
Offers online 4
Last activity Nov. 10, 2026

Seller's description

SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.)
Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together).
Manufacturer: GABLER Thermoform GmbH & Co., Germany.
Date of acceptance to accounting: 04/30/2014.
Main technical characteristics:
Area of forming surface, mm Maximum - 450x220
Minimum - 430x180
Maximum width of the tape, mm 480
Maximum tape thickness, mm 2
Maximum depth of molding, mm 125
Maximum noise level, dB Not more than 80
Tact at idle, tact / min 44
Mechanical performance, cycles / min 21-25
Voltage 230 / 400V, 50Hz
Total power consumption, kW 64.15
Operating air pressure, bar 8
Dimensions (length x width x height), mm Thermoforming machine (including stacking-counting device): 6000 11400 x 3000 x 2870 (including crane)
Control cabinet: 1000 x 250 (G) x 1800,
Distribution cabinet: 1600 x 400 (G) x 1800
Shipping weight kg 8435
Operational characteristics: equipment operation requires the supply of a three-phase AC network, compressed air with a pressure of 8 Bar, and coolant.

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.



Automatic description (AI-Generated)

The Gabler SWING thermoforming machine, manufactured in 2013 by GABLER Thermoform GmbH & Co., Germany, is designed for producing plastic cups and containers from various thermoforming polymers such as PP, PS, PET, and HIPS. This industrial blowmoulding machine features a preheating station (2heat) and utilizes a complete 8-socket mold with a stacking device, enabling efficient manufacturing of PP stacks. The machine is capable of handling a maximum forming surface area of 450 x 220 mm, with a tape width of up to 480 mm and tape thickness up to 2 mm. It can mold to a maximum depth of 125 mm.

The machine operates with a mechanical performance of 21 to 25 cycles per minute and an idle tact rate of 44 cycles per minute. It requires a three-phase AC power supply of 230/400 V at 50 Hz, with a total power consumption of 64.15 kW, and compressed air at an operating pressure of 8 bar. The maximum noise level during operation does not exceed 80 dB.

Physically, the thermoforming machine including the stacking and counting device measures 11,400 mm in length, 3,000 mm in width, and 2,870 mm in height, with a shipping weight of 8,435 kg. The control cabinet and distribution cabinet are also included in the setup.

The machine is housed in blue and white panels and is equipped with a control panel featuring buttons and a display screen for operation management. A yellow overhead arm or crane attachment is mounted on top for handling purposes. The interior contains mechanical arms, tubes, metal rods, and linear actuator mechanisms, with safety features such as yellow warning labels. The machine includes a conveyor belt system and a white perforated plastic sheet as part of its configuration.

The equipment is situated indoors on a concrete factory floor with overhead lighting. It appears clean and well-maintained, with no visible signs of damage or wear, indicating careful upkeep. The machine's operation requires connection to a three-phase AC network, compressed air, and coolant supply to function effectively.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Factory – small or medium company
Active since 2019
Offers online 4
Last activity Nov. 10, 2026

Here is a selection of similar machines - Gabler SWING

Gabler SWING Blowmoulding machine