| Manufacturer | Gabler |
|---|---|
| Model | F60 |
| Year | 2017 |
| Location | Turkey
|
The Gabler F60 thermoforming machine, manufactured in 2017, is designed for producing deep-drawn formed parts using heated plastic film. It operates with an automatic roll-fed system where the plastic film is unwound in a controlled manner from a roll feeder. The machine features a toothed conveyor belt that automatically transports the film through the various processing stations. Both top and bottom heating elements are used in the heating station to prepare the film for forming. Subsequently, vacuum and compressed air are applied to shape the film into the mold for deep drawing. After the forming process, the outer contours of the product blanks are trimmed, with retaining collars holding the blanks in place during this stage. Finished blanks are then pressed out of the film in the stacking station and stacked on a conveyor belt that transports them out of the machine once a predetermined quantity is reached.
This thermoforming process is largely automated according to programmed specifications, with only the manual removal of finished workpieces required at the outlet. The trimming and stacking stations are adjustable to accommodate different product sizes. The machine is equipped with sensors to monitor various aspects of the forming process, enhancing operational control.
From the exterior, the machine includes several transparent protective panels that provide visibility into the working areas while maintaining safety. A mounted touchscreen control panel is located on the left side for user interface and operation. The front panel displays four pressure gauges for monitoring machine parameters. Safety features include warning stickers near handles on access doors and an emergency stop button on the right side panel. The machine's exterior shows minor signs of use but no visible damage or rust, and it appears clean and well-maintained. Additional components visible include a large white industrial unit with ventilation panels and an electrical or control cabinet with hazard warning stickers. A hydraulic or pneumatic pump unit is also present nearby on a wooden pallet. The machine is positioned on a factory floor with clear access paths, facilitating operation and maintenance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different product sizes, and the machine incorporates sensors for monitoring various aspects of the process.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 3 |
| Last activity | Nov. 10, 2026 |
The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different product sizes, and the machine incorporates sensors for monitoring various aspects of the process.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Gabler F60 thermoforming machine, manufactured in 2017, is designed for producing deep-drawn formed parts using heated plastic film. It operates with an automatic roll-fed system where the plastic film is unwound in a controlled manner from a roll feeder. The machine features a toothed conveyor belt that automatically transports the film through the various processing stations. Both top and bottom heating elements are used in the heating station to prepare the film for forming. Subsequently, vacuum and compressed air are applied to shape the film into the mold for deep drawing. After the forming process, the outer contours of the product blanks are trimmed, with retaining collars holding the blanks in place during this stage. Finished blanks are then pressed out of the film in the stacking station and stacked on a conveyor belt that transports them out of the machine once a predetermined quantity is reached.
This thermoforming process is largely automated according to programmed specifications, with only the manual removal of finished workpieces required at the outlet. The trimming and stacking stations are adjustable to accommodate different product sizes. The machine is equipped with sensors to monitor various aspects of the forming process, enhancing operational control.
From the exterior, the machine includes several transparent protective panels that provide visibility into the working areas while maintaining safety. A mounted touchscreen control panel is located on the left side for user interface and operation. The front panel displays four pressure gauges for monitoring machine parameters. Safety features include warning stickers near handles on access doors and an emergency stop button on the right side panel. The machine's exterior shows minor signs of use but no visible damage or rust, and it appears clean and well-maintained. Additional components visible include a large white industrial unit with ventilation panels and an electrical or control cabinet with hazard warning stickers. A hydraulic or pneumatic pump unit is also present nearby on a wooden pallet. The machine is positioned on a factory floor with clear access paths, facilitating operation and maintenance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 3 |
| Last activity | Nov. 10, 2026 |
Термоформоване - Автоматична ролкова машина Gabler F60
Stroj na tvarování folie Gabler F60
Termoformning - Automatisk Roll-Fed Machine Gabler F60
Gabler F60 Thermoform - Rollenautomat
Thermoforming - Automatic Roll-Fed Machine Gabler F60
Used Gabler F60
Máquina de corte con estaciones Gabler F60
Thermofomeuse à bobine Gabler F60
Termoformiranje - Automatski stroj za uvlačenje na valjke Gabler F60
Gabler F60 Hőformázás - Automata görgős adagológép
Macchina di taglio nel cambio formato Gabler F60
Termoformavimas – automatinė ruloninio padavimo mašina Gabler F60
Gabler F60 Thermovormen - Automatische rolaanvoermachine
Automatyczna maszyna Roll-Fed Gabler F60
Termoformagem - Máquina Automática Roll-Fed Gabler F60
Termoformare - Mașină automată cu rolă Gabler F60
Gabler F60 Рулонный автомат для отдельного формования и штамповки
Termoformiranje - automatska mašina sa rolni Gabler F60
Gabler F60 Termoformning - Automatisk rullmatningsmaskin
şekillendirme ve delme işlemi için otomatik roll-fed termoform makineleri Gabler F60
EN
- Languages
English (GB)