| Manufacturer | FUJI |
|---|---|
| Model | sFAB-D |
| Year | 2018 |
| Location | USA
|
2018 Fuji sFAB-D Odd Form Placer
This listing is for a Fuji sFAB-D odd form placer, identified as a 2018 model. The stated manufacture date is December 2017. The applicable head is an sH02 head.
The listed clamp width range is 0.5 to 47 mm. The stated maximum part height is 65 mm or less, including leads. These figures describe the clamp-width range and part-height limit provided for this machine.
Electrical information in the listing is: AC 200–230 V supply voltage, 50 A full-load current, 50/60 Hz frequency, and three-phase power. Please use these stated electrical and operating details when considering whether the machine is suitable for your requirements.
The condition is described as “like new.” The description also states that daily maintenance was performed while the machine was under operation. These are the condition and maintenance details provided for the listing.
Five kit types are listed as options:
- Starter tool kit for light parts
- Starter tool kit for small parts
- Full set for light parts
- Full set for small parts
- Full set for large parts
The listing identifies the machine, applicable head, clamp-width range, part-height limit, electrical requirements, maintenance statement, and available kit types. No further details about the contents of each kit are provided. The available information does not specify which kit is included, so the listed kit types should be treated as the options described rather than as confirmation that every kit comes with the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
PICK & PLACE MACHINES
2018 Fuji sFAB-D Odd Form Placer
IN LIKE NEW CONDITION
Daily Maintenance performed while under operation
Applicable head(s): sH02 head
Clamp width: 0.5 to 47mm
Supply Voltage: AC 200-230V
Full Load Amp: 50A
Freq: 50/60Hz
Phase: 3
December 2017 MFR Date
Part height: 65mm or less (including leads)
Kit types5 types:
- Starter tool kit for light parts
- Starter tool kit for small parts
- Full set for light parts
- Full set for small parts
- Full set for large parts
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 15 |
| Last activity | Nov. 9, 2026 |
PICK & PLACE MACHINES
2018 Fuji sFAB-D Odd Form Placer
IN LIKE NEW CONDITION
Daily Maintenance performed while under operation
Applicable head(s): sH02 head
Clamp width: 0.5 to 47mm
Supply Voltage: AC 200-230V
Full Load Amp: 50A
Freq: 50/60Hz
Phase: 3
December 2017 MFR Date
Part height: 65mm or less (including leads)
Kit types5 types:
- Starter tool kit for light parts
- Starter tool kit for small parts
- Full set for light parts
- Full set for small parts
- Full set for large parts
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
2018 Fuji sFAB-D Odd Form Placer
This listing is for a Fuji sFAB-D odd form placer, identified as a 2018 model. The stated manufacture date is December 2017. The applicable head is an sH02 head.
The listed clamp width range is 0.5 to 47 mm. The stated maximum part height is 65 mm or less, including leads. These figures describe the clamp-width range and part-height limit provided for this machine.
Electrical information in the listing is: AC 200–230 V supply voltage, 50 A full-load current, 50/60 Hz frequency, and three-phase power. Please use these stated electrical and operating details when considering whether the machine is suitable for your requirements.
The condition is described as “like new.” The description also states that daily maintenance was performed while the machine was under operation. These are the condition and maintenance details provided for the listing.
Five kit types are listed as options:
- Starter tool kit for light parts
- Starter tool kit for small parts
- Full set for light parts
- Full set for small parts
- Full set for large parts
The listing identifies the machine, applicable head, clamp-width range, part-height limit, electrical requirements, maintenance statement, and available kit types. No further details about the contents of each kit are provided. The available information does not specify which kit is included, so the listed kit types should be treated as the options described rather than as confirmation that every kit comes with the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 15 |
| Last activity | Nov. 9, 2026 |
Машина за автоматично поставяне FUJI sFAB-D
Odsazovací stroj FUJI sFAB-D
FUJI sFAB-D Placeringsmaskine
FUJI sFAB-D Bestückungsautomat
Μηχάνημα αυτόματης τοποθέτησης εξαρτημάτων FUJI sFAB-D
FUJI sFAB-D Pick-and-place machine
Máquina de colocación FUJI sFAB-D
Machine de placement FUJI sFAB-D
Stroj za automatsko postavljanje FUJI sFAB-D
FUJI sFAB-D Pick-and-place gép
Macchina pick and place FUJI sFAB-D
FUJI sFAB-D Automatinė montavimo mašina
FUJI sFAB-D Pick-and-place machine
Maszyna do montażu powierzchniowego FUJI sFAB-D
Máquina de colocação FUJI sFAB-D
Mașină de plasare FUJI sFAB-D
FUJI sFAB-D Установщик компонентов
Mašina za automatsko postavljanje FUJI sFAB-D
FUJI sFAB-D Monteringsmaskin
Bileşen yerleştirme makinesi FUJI sFAB-D
EN
- Languages
English (GB)