| Category | Laboratory - General laboratory equipment |
| Length x width x height | 300.0 × 280.0 × 770.0 |
| Weight | 25 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 30/10/2026 |
| Product id | P260910185 |
| Language |
FOSS Kjeltec 2100 Distillation Unit — description and specifications
Overview
This listing is for a FOSS Kjeltec 2100 nitrogen distillation unit intended for Kjeldahl-type nitrogen/protein analysis. The unit specification set below is taken from the provided product information. No claims are made about operational status or recent testing.
Key specifications
- Manufacturer/model: FOSS Kjeltec 2100
- Measurement range: 0.1–200 mg nitrogen
- Distillation capacity: approximately 30 ml/min
- Typical distillation times: ~4 minutes for 30 mg nitrogen; ~7 minutes for 200 mg nitrogen
- Reproducibility: 1% RSD (this value includes the mineralization step)
- Recovery rate: >99.5% for nitrogen contents between 1 and 200 mg
- Reagent pump volume settings: 0–150 ml in 10-ml increments
- Water consumption during distillation: 2 L/min at 30 °C; approximately 1 L/min at 15 °C
- Power consumption: 1900 W
- Weight: 25 kg
- Dimensions (W x D x H): 30 x 28 x 77 cm (300 x 280 x 770 mm)
Notes
- The above values are the technical specifications provided in the listing information. No additional accessories, consumables, or condition details are included here unless explicitly listed in the original information.
- Year of manufacture is not provided.
If you require verification of operational condition, included accessories, calibration status, or additional photos, please refer to the seller’s listing for those details.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
FOSS Kjeltec 2100 Distillation Unit
Distillation time: 4 minutes for 30 mg of nitrogen (7 min for 200 mg of nitrogen)
Distillation capacity: ~ 30 ml/min
Measurement range: 0.1–200 mg of nitrogen
Reproducibility: 1% RSD (including the mineralization step)
Recovery rate: >99.5% for nitrogen contents between 1 and 200 mg
Reagent pump volumes: 0 – 150 ml in 10-ml increments
Water consumption:
2 l/min at a water temperature of 30 °C (only during distillation)
1 L/min at a water temperature of 15 °C
Power consumption: 1900 W
Weight: 25 kg
Dimensions (W x D x H) in cm: 30 x 28 x 77
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 107 |
| Last activity | Oct. 31, 2026 |
FOSS Kjeltec 2100 Distillation Unit
Distillation time: 4 minutes for 30 mg of nitrogen (7 min for 200 mg of nitrogen)
Distillation capacity: ~ 30 ml/min
Measurement range: 0.1–200 mg of nitrogen
Reproducibility: 1% RSD (including the mineralization step)
Recovery rate: >99.5% for nitrogen contents between 1 and 200 mg
Reagent pump volumes: 0 – 150 ml in 10-ml increments
Water consumption:
2 l/min at a water temperature of 30 °C (only during distillation)
1 L/min at a water temperature of 15 °C
Power consumption: 1900 W
Weight: 25 kg
Dimensions (W x D x H) in cm: 30 x 28 x 77
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Laboratory - General laboratory equipment |
| Length x width x height | 300.0 × 280.0 × 770.0 |
| Weight | 25 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 30/10/2026 |
| Product id | P260910185 |
| Language |
FOSS Kjeltec 2100 Distillation Unit — description and specifications
Overview
This listing is for a FOSS Kjeltec 2100 nitrogen distillation unit intended for Kjeldahl-type nitrogen/protein analysis. The unit specification set below is taken from the provided product information. No claims are made about operational status or recent testing.
Key specifications
- Manufacturer/model: FOSS Kjeltec 2100
- Measurement range: 0.1–200 mg nitrogen
- Distillation capacity: approximately 30 ml/min
- Typical distillation times: ~4 minutes for 30 mg nitrogen; ~7 minutes for 200 mg nitrogen
- Reproducibility: 1% RSD (this value includes the mineralization step)
- Recovery rate: >99.5% for nitrogen contents between 1 and 200 mg
- Reagent pump volume settings: 0–150 ml in 10-ml increments
- Water consumption during distillation: 2 L/min at 30 °C; approximately 1 L/min at 15 °C
- Power consumption: 1900 W
- Weight: 25 kg
- Dimensions (W x D x H): 30 x 28 x 77 cm (300 x 280 x 770 mm)
Notes
- The above values are the technical specifications provided in the listing information. No additional accessories, consumables, or condition details are included here unless explicitly listed in the original information.
- Year of manufacture is not provided.
If you require verification of operational condition, included accessories, calibration status, or additional photos, please refer to the seller’s listing for those details.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 107 |
| Last activity | Oct. 31, 2026 |