Contact us to receive an offer.
| Manufacturer | FM |
|---|---|
| Model | FM 14 |
| Year | 1989 |
| Location | Germany
|
| Category | Saws - Panel saws |
| Cutting length | 4200 mm |
| Cutting height | 800 mm |
| Type | horizontal |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | FM FM 14 |
| Last availability date | 13/07/2026 |
| Product id | P260611003 |
| Language |
Форматно-разкройна машина FM FM 14
Formátovací pila FM FM 14
FM FM 14 Pladesav
FM FM 14 Plattensäge
Πριόνι πάνελ FM FM 14
FM FM 14 Panel saw
Seccionadora FM FM 14
Scie à panneaux FM FM 14
Formatna pila FM FM 14
FM FM 14 Lapszabászgép
Sezionatrice FM FM 14
FM FM 14 Plokščių pjovimo staklės
FM FM 14 Paneelzaag
Piła panelowa FM FM 14
Seccionadora FM FM 14
Mașină de debitat panouri FM FM 14
FM FM 14 Форматно-раскроечная пила
Formatna testera FM FM 14
FM FM 14 Panelsåg
Panel kesme makinesi FM FM 14
|
Panel cutting saw FM 14-P – DNC 4200 x 4200
Year of manufacture: 1989
Overview
This listing describes a Scheer-type panel cutting saw with DNC multi-microprocessor control, model FM 14-P – DNC 4200 x 4200 (manufactured 1989). The machine package includes a longitudinal saw unit, material feed and support tables, residual cutting device, angle pressing device, postforming device, and saw blades as detailed below.
Main longitudinal saw (FM 14 – 4200)
- Hardened guides
- Automatic forward and reverse feed of the saw unit
- Automatic lowering during reverse
- Extraction channels in machine base and pressure bar
- Feed speed: 2 – 40 m/min
- Saw motor: 11 kW
- Scorer motor: 1.5 kW
- Voltage: 380 V / 50 Hz (three‑phase)
- Cutting length: 4200 mm
- Cutting height: 105 mm
- Safety hood lock and lamella safety curtain included
- Cutting height adjustment: electronic via keyboard, 3-step adjustable
Material feed table (HP 5021, rear-mounted)
- 7 clamping sliders
- DC geared motor with 4-quadrant control
- Measurement via pulse generator and scale rack
- Measurement resolution: 0.05 mm
- Feed speed: 28 m/min
- Table length / stop depth: 4200 mm
Control and automation (DNC multi‑microprocessor control)
- Screen operation and input
- Operating modes: Manual, Single measurement, Special operation, Edge trimming, Automatic
- Graphical display of cutting plans
- Storage on CF card (virtually unlimited capacity)
Additional equipment
- Residual cutting device SP 5000 – 4200 (for residual cuts down to 5 mm minimum)
- Angle pressing device WP 5003 (mounted on back of pressure bar; pneumatic pressing claw; handwheel adjustment; adjustment range up to 2400 mm)
- Angle stop table HP 5024 (front) — table size 1800 x 800 mm
- Two movable workpiece support tables HP 5025 (front) — each 1800 x 800 mm
- Air cushion device integrated in front tables (HP 5024 & HP 5025) with radial fans for gentle handling
- Postforming device with postforming saw: 2.2 kW; cutting height up to 80 mm
Saw blades provided
- 1x Carbide‑tipped circular saw blade KSB 4001 — Ø 400 mm, Z = 72 (main saw)
- 1x Carbide‑tipped circular saw blade KSB 4003 — Ø 400 mm, Z = 72 (postforming)
Notes
All specifications and components are taken from the existing product information supplied with this listing. No additional conditions, images, or test results are included in this description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Panel cutting saw FM 14-P – DNC 4200 x 4200
Year of manufacture: 1989
✅ Fully refurbished
✅ 1 year warranty
Equipment and Components
1x Longitudinal saw FM 14 – 4200
Hardened guides
Automatic forward and reverse feed of the saw unit
Automatic lowering during reverse
Extraction channels in machine base and pressure bar
Feed speed: 2 – 40 m/min
Saw motor: 11 kW
Scorer motor: 1.5 kW
Voltage: 380 V / 50 Hz (three-phase)
Cutting length: 4200 mm
Cutting height: 105 mm
Includes safety hood lock and lamella safety curtain
Cutting height adjustment
Electronically via keyboard
3-step adjustable
1x Material feed table HP 5021 (rear-mounted)
7 clamping sliders
DC geared motor with 4-quadrant control
Measurement via pulse generator and scale rack
Measurement resolution: 0.05 mm (highest precision)
Feed speed: 28 m/min
Table length: 4200 mm
Stop depth: 4200 mm
DNC multi-microprocessor control:
Operation and input via screen
Operating modes:
Manual
Single measurement
Special operation
Edge trimming operation
Automatic operation
Graphical display of cutting plans
Storage on CF card (virtually unlimited capacity)
1x Residual cutting device SP 5000 – 4200
For residual cuts down to 5 mm minimum
1x Angle pressing device WP 5003
Mounted on back of pressure bar
Pneumatic pressing claw
Adjustment via handwheel
Adjustment range: up to 2400 mm
1x Angle stop table HP 5024 (front)
Table size: 1800 x 800 mm
2x Workpiece support tables HP 5025 (front, movable)
Table size: 1800 x 800 mm each
Air cushion device
Integrated in front tables (HP 5024 & HP 5025)
Includes radial fans
For gentle and smooth material handling
Postforming device
Postforming saw: 2.2 kW
Cutting height: up to 80 mm
Saw blades:
1x Carbide-tipped circular saw blade KSB 4001
Ø 400 mm, Z = 72 (main saw)
1x Carbide-tipped circular saw blade KSB 4003
Ø 400 mm, Z = 72 (postforming)
SEO: Panel cutting saw, SCHEER saws, panel saws.. etc
Panel cutting saw FM 14-P – DNC 4200 x 4200. Manufactured in 1989. Fully refurbished. 1 year warranty. Equipped with 1x Longitudinal saw FM 14 – 4200. Features hardened guides, automatic forward and reverse movement of the saw unit, automatic lowering during reverse, and extraction channels in the machine base and pressure bar. The saw motor is 11 kW, the scorer motor is 1.5 kW, and it operates at 380 V / 50 Hz (three-phase). The cutting length is 4200 mm, and the cutting height is 105 mm. Includes lockable safety hood and lamella safety curtain. Cutting height adjustment is electronically adjustable via keyboard in three steps. Includes material feed table HP 5021 (rear-mounted). 7 clamping sliders, DC motor with 4-quadrant control, measurement via impulse transmitter and rack scale, measurement resolution: 0.05 mm (highest precision). The table length is 4200 mm, and the stop depth is 4200 mm. Equipped with DNC multi-microprocessor control: operation and measurement input via screen, operating modes: manual, single measurement, special operation, trimming operation, automatic operation. Graphical representation of cutting plans, storage on CF card (almost unlimited capacity). Includes residual cutting device SP 5000 – 4200 for residual cuts from 5 mm and angle pressing device WP 5003 for clamping workpieces up to 2400 mm. Includes tumbling press device and tumbling feed table.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 12 |
| Last activity | Oct. 26, 2026 |
Panel cutting saw FM 14-P – DNC 4200 x 4200
Year of manufacture: 1989
✅ Fully refurbished
✅ 1 year warranty
Equipment and Components
1x Longitudinal saw FM 14 – 4200
Hardened guides
Automatic forward and reverse feed of the saw unit
Automatic lowering during reverse
Extraction channels in machine base and pressure bar
Feed speed: 2 – 40 m/min
Saw motor: 11 kW
Scorer motor: 1.5 kW
Voltage: 380 V / 50 Hz (three-phase)
Cutting length: 4200 mm
Cutting height: 105 mm
Includes safety hood lock and lamella safety curtain
Cutting height adjustment
Electronically via keyboard
3-step adjustable
1x Material feed table HP 5021 (rear-mounted)
7 clamping sliders
DC geared motor with 4-quadrant control
Measurement via pulse generator and scale rack
Measurement resolution: 0.05 mm (highest precision)
Feed speed: 28 m/min
Table length: 4200 mm
Stop depth: 4200 mm
DNC multi-microprocessor control:
Operation and input via screen
Operating modes:
Manual
Single measurement
Special operation
Edge trimming operation
Automatic operation
Graphical display of cutting plans
Storage on CF card (virtually unlimited capacity)
1x Residual cutting device SP 5000 – 4200
For residual cuts down to 5 mm minimum
1x Angle pressing device WP 5003
Mounted on back of pressure bar
Pneumatic pressing claw
Adjustment via handwheel
Adjustment range: up to 2400 mm
1x Angle stop table HP 5024 (front)
Table size: 1800 x 800 mm
2x Workpiece support tables HP 5025 (front, movable)
Table size: 1800 x 800 mm each
Air cushion device
Integrated in front tables (HP 5024 & HP 5025)
Includes radial fans
For gentle and smooth material handling
Postforming device
Postforming saw: 2.2 kW
Cutting height: up to 80 mm
Saw blades:
1x Carbide-tipped circular saw blade KSB 4001
Ø 400 mm, Z = 72 (main saw)
1x Carbide-tipped circular saw blade KSB 4003
Ø 400 mm, Z = 72 (postforming)
SEO: Panel cutting saw, SCHEER saws, panel saws.. etc
Panel cutting saw FM 14-P – DNC 4200 x 4200. Manufactured in 1989. Fully refurbished. 1 year warranty. Equipped with 1x Longitudinal saw FM 14 – 4200. Features hardened guides, automatic forward and reverse movement of the saw unit, automatic lowering during reverse, and extraction channels in the machine base and pressure bar. The saw motor is 11 kW, the scorer motor is 1.5 kW, and it operates at 380 V / 50 Hz (three-phase). The cutting length is 4200 mm, and the cutting height is 105 mm. Includes lockable safety hood and lamella safety curtain. Cutting height adjustment is electronically adjustable via keyboard in three steps. Includes material feed table HP 5021 (rear-mounted). 7 clamping sliders, DC motor with 4-quadrant control, measurement via impulse transmitter and rack scale, measurement resolution: 0.05 mm (highest precision). The table length is 4200 mm, and the stop depth is 4200 mm. Equipped with DNC multi-microprocessor control: operation and measurement input via screen, operating modes: manual, single measurement, special operation, trimming operation, automatic operation. Graphical representation of cutting plans, storage on CF card (almost unlimited capacity). Includes residual cutting device SP 5000 – 4200 for residual cuts from 5 mm and angle pressing device WP 5003 for clamping workpieces up to 2400 mm. Includes tumbling press device and tumbling feed table.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Saws - Panel saws |
| Cutting length | 4200 mm |
| Cutting height | 800 mm |
| Type | horizontal |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | FM FM 14 |
| Last availability date | 13/07/2026 |
| Product id | P260611003 |
| Language |
Форматно-разкройна машина FM FM 14
Formátovací pila FM FM 14
FM FM 14 Pladesav
FM FM 14 Plattensäge
Πριόνι πάνελ FM FM 14
FM FM 14 Panel saw
Seccionadora FM FM 14
Scie à panneaux FM FM 14
Formatna pila FM FM 14
FM FM 14 Lapszabászgép
Sezionatrice FM FM 14
FM FM 14 Plokščių pjovimo staklės
FM FM 14 Paneelzaag
Piła panelowa FM FM 14
Seccionadora FM FM 14
Mașină de debitat panouri FM FM 14
FM FM 14 Форматно-раскроечная пила
Formatna testera FM FM 14
FM FM 14 Panelsåg
Panel kesme makinesi FM FM 14
|
Panel cutting saw FM 14-P – DNC 4200 x 4200
Year of manufacture: 1989
Overview
This listing describes a Scheer-type panel cutting saw with DNC multi-microprocessor control, model FM 14-P – DNC 4200 x 4200 (manufactured 1989). The machine package includes a longitudinal saw unit, material feed and support tables, residual cutting device, angle pressing device, postforming device, and saw blades as detailed below.
Main longitudinal saw (FM 14 – 4200)
- Hardened guides
- Automatic forward and reverse feed of the saw unit
- Automatic lowering during reverse
- Extraction channels in machine base and pressure bar
- Feed speed: 2 – 40 m/min
- Saw motor: 11 kW
- Scorer motor: 1.5 kW
- Voltage: 380 V / 50 Hz (three‑phase)
- Cutting length: 4200 mm
- Cutting height: 105 mm
- Safety hood lock and lamella safety curtain included
- Cutting height adjustment: electronic via keyboard, 3-step adjustable
Material feed table (HP 5021, rear-mounted)
- 7 clamping sliders
- DC geared motor with 4-quadrant control
- Measurement via pulse generator and scale rack
- Measurement resolution: 0.05 mm
- Feed speed: 28 m/min
- Table length / stop depth: 4200 mm
Control and automation (DNC multi‑microprocessor control)
- Screen operation and input
- Operating modes: Manual, Single measurement, Special operation, Edge trimming, Automatic
- Graphical display of cutting plans
- Storage on CF card (virtually unlimited capacity)
Additional equipment
- Residual cutting device SP 5000 – 4200 (for residual cuts down to 5 mm minimum)
- Angle pressing device WP 5003 (mounted on back of pressure bar; pneumatic pressing claw; handwheel adjustment; adjustment range up to 2400 mm)
- Angle stop table HP 5024 (front) — table size 1800 x 800 mm
- Two movable workpiece support tables HP 5025 (front) — each 1800 x 800 mm
- Air cushion device integrated in front tables (HP 5024 & HP 5025) with radial fans for gentle handling
- Postforming device with postforming saw: 2.2 kW; cutting height up to 80 mm
Saw blades provided
- 1x Carbide‑tipped circular saw blade KSB 4001 — Ø 400 mm, Z = 72 (main saw)
- 1x Carbide‑tipped circular saw blade KSB 4003 — Ø 400 mm, Z = 72 (postforming)
Notes
All specifications and components are taken from the existing product information supplied with this listing. No additional conditions, images, or test results are included in this description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 12 |
| Last activity | Oct. 26, 2026 |
EN
- Languages
English (GB)