| Manufacturer | FERMAT |
|---|---|
| Model | WHN 13.8 CNC |
| Year | 1980 |
| Location | Germany
|
FERMAT WHN 13.8 CNC horizontal boring machine, manufactured in 1980 and overhauled in 2008. It has X-axis travel of 3,500 mm, Y-axis travel of 2,000 mm and Z-axis travel of 1,350 mm. The table measures 2,200 x 1,800 mm and supports workpieces weighing up to 12,000 kg. The machine is fitted with a 130 mm diameter spindle, with a maximum speed of 1,200 rpm and spindle motor power of 37 kW. Overall machine dimensions are 7,800 x 7,200 x 4,900 mm, and the listed weight is 38,000 kg.
The machine has a broad T-slot table and a projecting spindle. Its control panel is branded Heidenhain and includes a display, keyboard, keypad, selector switches and push buttons. The supplied equipment and documentation listed include a chip conveyor, a separate electrical control cabinet, a hydraulic supply unit, technical documentation and an operating manual. The machine identification plate states that it was modernized in 2008 by FERMAT CZ s.r.o.
Visible exterior surfaces and the table show scuffing, wear, grime and discoloration. The control panel also appears dusty and worn, and its display is dark. The electrical cabinet is shown open, with electrical components and wiring exposed; loose cables and small components are visible at its bottom. These visible condition details are provided for the buyer’s assessment and do not establish the machine’s operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 5-axis FERMAT WHN 13.8 CNC was manufactured in 1980 and overhauled in 2008. It features a generous X-axis travel of 3,500 mm, Y-axis travel of 2,000 mm, and Z-axis travel of 1,250 mm. The machine includes a robust table size of 2,200 x 1,800 mm and can handle a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality machining capabilities, consider the FERMAT WHN 13.8 CNC horizontal machining centre. Contact us for further details.- Original Year of Manufacture: 1980
- Overhaul / Modernization Year: 2008 (by FERMAT CZ s.r.o.)
- Heidenhain main drive module for Y-axis renewed in 2026
- CNC Control: Heidenhain iTNC 530 (with installed Service Pack and electronic handwheel)
- Controlled Axes: 5 axes (X, Y, Z, W, and B)
- Travel W-Axis (Spindle stroke): 800 mm
- B-Axis: NC rotary table (360°)
- Table Dimensions: 2,200 x 1,800 mm
- Max. Workpiece Weight on Table: 12,000 kg
- T-Slots: 11 slots; 24 H7; 160 mm pitch
- Spindle Diameter: 130 mm
- Tool Taper: ISO 50
- Spindle Speed Range: 5 to 1,200 rpm
- Main Drive Power: 37 kW
- Rapid Traverse: 6,000 mm/min
- Positioning Accuracy: ± 0.02 mm
- Installed Power Capacity: 50 kVA
- Machine Dimensions: approx. 7,800 x 7,200 x 4,900 mm
- Footprint / Ceiling Clearance: approx. 50 m² floor space; required installation height 6,300 mm
- Machine Weight: approx. 38,000 kg
- Included Equipment & Features: Chip conveyor system, separate electrical control cabinet, hydraulic supply unit, technical documentation and operating manual (Version Breuer 060412)
Control Brand: HEIDENHAIN
Number of Axes: 5
Spindle Speed: 1200 RPM
X-axis Travel: 3500 mm
Y-axis Travel: 2000 mm
Z-axis Travel: 1350 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 5-axis FERMAT WHN 13.8 CNC was manufactured in 1980 and overhauled in 2008. It features a generous X-axis travel of 3,500 mm, Y-axis travel of 2,000 mm, and Z-axis travel of 1,250 mm. The machine includes a robust table size of 2,200 x 1,800 mm and can handle a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality machining capabilities, consider the FERMAT WHN 13.8 CNC horizontal machining centre. Contact us for further details.- Original Year of Manufacture: 1980
- Overhaul / Modernization Year: 2008 (by FERMAT CZ s.r.o.)
- Heidenhain main drive module for Y-axis renewed in 2026
- CNC Control: Heidenhain iTNC 530 (with installed Service Pack and electronic handwheel)
- Controlled Axes: 5 axes (X, Y, Z, W, and B)
- Travel W-Axis (Spindle stroke): 800 mm
- B-Axis: NC rotary table (360°)
- Table Dimensions: 2,200 x 1,800 mm
- Max. Workpiece Weight on Table: 12,000 kg
- T-Slots: 11 slots; 24 H7; 160 mm pitch
- Spindle Diameter: 130 mm
- Tool Taper: ISO 50
- Spindle Speed Range: 5 to 1,200 rpm
- Main Drive Power: 37 kW
- Rapid Traverse: 6,000 mm/min
- Positioning Accuracy: ± 0.02 mm
- Installed Power Capacity: 50 kVA
- Machine Dimensions: approx. 7,800 x 7,200 x 4,900 mm
- Footprint / Ceiling Clearance: approx. 50 m² floor space; required installation height 6,300 mm
- Machine Weight: approx. 38,000 kg
- Included Equipment & Features: Chip conveyor system, separate electrical control cabinet, hydraulic supply unit, technical documentation and operating manual (Version Breuer 060412)
Control Brand: HEIDENHAIN
Number of Axes: 5
Spindle Speed: 1200 RPM
X-axis Travel: 3500 mm
Y-axis Travel: 2000 mm
Z-axis Travel: 1350 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
FERMAT WHN 13.8 CNC horizontal boring machine, manufactured in 1980 and overhauled in 2008. It has X-axis travel of 3,500 mm, Y-axis travel of 2,000 mm and Z-axis travel of 1,350 mm. The table measures 2,200 x 1,800 mm and supports workpieces weighing up to 12,000 kg. The machine is fitted with a 130 mm diameter spindle, with a maximum speed of 1,200 rpm and spindle motor power of 37 kW. Overall machine dimensions are 7,800 x 7,200 x 4,900 mm, and the listed weight is 38,000 kg.
The machine has a broad T-slot table and a projecting spindle. Its control panel is branded Heidenhain and includes a display, keyboard, keypad, selector switches and push buttons. The supplied equipment and documentation listed include a chip conveyor, a separate electrical control cabinet, a hydraulic supply unit, technical documentation and an operating manual. The machine identification plate states that it was modernized in 2008 by FERMAT CZ s.r.o.
Visible exterior surfaces and the table show scuffing, wear, grime and discoloration. The control panel also appears dusty and worn, and its display is dark. The electrical cabinet is shown open, with electrical components and wiring exposed; loose cables and small components are visible at its bottom. These visible condition details are provided for the buyer’s assessment and do not establish the machine’s operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Настолни пробивни машина с ЦПУ FERMAT WHN 13.8 CNC
CNC stolová vyvrtávačka FERMAT WHN 13.8 CNC
FERMAT WHN 13.8 CNC CNC-bordboremaskine
FERMAT WHN 13.8 CNC CNC Tischbohrwerk
Μηχάνημα διάτρησης επιτραπέζιου CNC FERMAT WHN 13.8 CNC
FERMAT WHN 13.8 CNC Table type boring machine CNC
Mandrinadora de columna fija CNC FERMAT WHN 13.8 CNC
Aléseuse à montant fixe CNC FERMAT WHN 13.8 CNC
Stroj za bušenje stolnog CNC FERMAT WHN 13.8 CNC
FERMAT WHN 13.8 CNC CNC asztal fúrógép
Alesatrice a montante fisso CNC FERMAT WHN 13.8 CNC
FERMAT WHN 13.8 CNC CNC stalo gręžimo mašina
FERMAT WHN 13.8 CNC Bankboormachine CNC
Wytaczarka CNC stołowa FERMAT WHN 13.8 CNC
Mandriladoras de coluna fixa CNC FERMAT WHN 13.8 CNC
Mașină de alezat pe masă CNC FERMAT WHN 13.8 CNC
FERMAT WHN 13.8 CNC Горизонтально-расточной станок с ЧПУ
CNC Mašina za bušenje stolnog tipa FERMAT WHN 13.8 CNC
FERMAT WHN 13.8 CNC CNC bordborrmaskin
CNC tabla tipi borverk makinesi FERMAT WHN 13.8 CNC
EN
- Languages
English (GB)