Contact us to receive an offer.
| Manufacturer | FAS GŁOWNO BUB 40 x 1500 NC |
|---|---|
| Model | BUB 40 x 1500 NC |
| Year | 2024 |
| Location | Poland
|
This listing is for a FAS GŁOWNO BUB 40 x 1500 NC cylindrical grinding machine, manufactured in 2024. The machine is new and unused, equipped with a Mitsubishi NC control system. It is currently under lease with ING Lease, with 56 installments remaining and a capital outstanding of EUR 86,061.15. The lease payment is EUR 1,717.22 net per installment, including principal and interest components. An annual insurance policy with ING Lease is also in place.
The machine is designed for grinding workpieces with a maximum diameter of 400 mm and a maximum length of 1500 mm. It features a tusk lift of 200 mm and a distance between claws of 1500 mm. The smallest ground workpiece diameter achievable with a 380 mm diameter grinding wheel is 20 mm. The tailstock pin pitch is 40 mm, and the maximum tailstock clamping force is 4000 N. Both the headstock and tailstock tusk clamps use ISO 296-1991/Morse 5 taper standards.
The machine can handle a maximum workpiece weight of 500 kg in the tusk headstock and up to 100 kg in the chuck, including the chuck itself. Its dimensions are 6650 mm in width, 2400 mm in depth (excluding the desktop), and 1850 mm in height. The total weight of the machine is 7000 kg, with a total power requirement of 38 kVA.
The abrasive wheel cutting edge uses a standard grinding wheel measuring 500 x 80 x 203.2 mm, powered by an 11 kW motor. The rated speed of the grinding wheel spindle varies between 1744 and 2000 rpm depending on the wheel size. The grinding wheel headstock travel is driven by a 2 kW servo motor with 9.5 Nm torque, capable of continuous travel speeds from 2 to 6 m/min and minimum incremental movements of 0.001 mm.
The table travel servo motor has a power of 3.5 kW and torque of 16.7 Nm. Workpiece spindle speeds range from 1 to 150 rpm, driven by a 3.5 kW servomotor providing 16.7 Nm torque.
Visual inspection confirms the machine is in clean and unused condition, with protective plastic wrapping still present on the control panel area. The grinding wheel and spindle assembly, machine bed, and carriage are visible. A flexible coolant hose is positioned near the grinding wheel. The side view shows the enclosure and electrical wiring, with the electrical cabinet door open and cables and components visible. A blue air hose is attached externally. The enclosure and components appear clean and intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
We have to offer a new BUB40 x 1500 NC machine - new unused with MITSHUBISHI NC control. The machine is still in Lease at ING Lease
- The lessor - ING Lease
- Capital outstanding - EUR 86,061.15
- Lease payment amount - EUR 1,717.22 net (including principal of about EUR 1,400.00; interest of about EUR 300.00 - these amounts will change, i.e., the value of principal will increase and the value of interest will decrease)
- Number of remaining installments - 56 installments
- ING Lease insurance policy (annually) - PLN 1,087.00 net.
- Maximum diameter of the workpiece: 400mm
- Maximum workpiece length: 1500mm
- Tusk lift: 200mm
- Distance between claws: 1500mm
- Smallest ground workpiece diameter with a 380mm diameter grinding wheel: 20mm
- Tailstock pin pitch: 40mm
- Maximum tailstock clamping force: 4000N
- Taper in headstock clamp of workpiece: ISO 296-1991/Morse 5
- Taper in tailstock tusk clamp: ISO 296-1991/Morse 5
- Largest workpiece weight in tusk headstock: 500kg
- Largest workpiece weight in chuck (including chuck): 100kg
- Width of the machine tool (with body): 6650mm
- Depth of machine tool (with body, without desktop) : 2400mm
- Height of machine tool (with buildings): 1850mm
- Weight of the machine: 7000kg
- Total power requirement: 38kVA
Abrasive wheel cutting edge
- Dimensions of standard grinding wheel: 500 x 80 x 203.2mm
- Power of grinding wheel drive motor: 11kW
- Rated rpm of grinding wheel spindle: (for grinding wheel 430 mm / for grinding wheel > 430 mm and 500 mm) 2000 / 1744rpm
- Power of grinding wheel headstock travel servo motor: 2kW
- Torque of grinding wheel headstock travel servo motor: 9.5Nm
- Maximum continuous travel speed in X axis: 2m/min
- Minimum value of grinding wheel travel in X axis: 0.001mm
- Maximum continuous travel speed in X axis: 6m/min
- Minimum value of grinding wheel travel in X axis: 0.001mm
- Maximum value of grinding wheel travel in INC mode 0.1mm
- Power of table travel servo motor 3.5 kW
- Torque of table travel servo motor 16.7 Nm
Workpiece infeed
- Object spindle speed range: 1 - 150 rpm
- Servomotor power of the workpiece headstock: 3.5kW
- Torque of the object headstock servomotor: 16.7Nm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | July 29, 2025 |
We have to offer a new BUB40 x 1500 NC machine - new unused with MITSHUBISHI NC control. The machine is still in Lease at ING Lease
- The lessor - ING Lease
- Capital outstanding - EUR 86,061.15
- Lease payment amount - EUR 1,717.22 net (including principal of about EUR 1,400.00; interest of about EUR 300.00 - these amounts will change, i.e., the value of principal will increase and the value of interest will decrease)
- Number of remaining installments - 56 installments
- ING Lease insurance policy (annually) - PLN 1,087.00 net.
- Maximum diameter of the workpiece: 400mm
- Maximum workpiece length: 1500mm
- Tusk lift: 200mm
- Distance between claws: 1500mm
- Smallest ground workpiece diameter with a 380mm diameter grinding wheel: 20mm
- Tailstock pin pitch: 40mm
- Maximum tailstock clamping force: 4000N
- Taper in headstock clamp of workpiece: ISO 296-1991/Morse 5
- Taper in tailstock tusk clamp: ISO 296-1991/Morse 5
- Largest workpiece weight in tusk headstock: 500kg
- Largest workpiece weight in chuck (including chuck): 100kg
- Width of the machine tool (with body): 6650mm
- Depth of machine tool (with body, without desktop) : 2400mm
- Height of machine tool (with buildings): 1850mm
- Weight of the machine: 7000kg
- Total power requirement: 38kVA
Abrasive wheel cutting edge
- Dimensions of standard grinding wheel: 500 x 80 x 203.2mm
- Power of grinding wheel drive motor: 11kW
- Rated rpm of grinding wheel spindle: (for grinding wheel 430 mm / for grinding wheel > 430 mm and 500 mm) 2000 / 1744rpm
- Power of grinding wheel headstock travel servo motor: 2kW
- Torque of grinding wheel headstock travel servo motor: 9.5Nm
- Maximum continuous travel speed in X axis: 2m/min
- Minimum value of grinding wheel travel in X axis: 0.001mm
- Maximum continuous travel speed in X axis: 6m/min
- Minimum value of grinding wheel travel in X axis: 0.001mm
- Maximum value of grinding wheel travel in INC mode 0.1mm
- Power of table travel servo motor 3.5 kW
- Torque of table travel servo motor 16.7 Nm
Workpiece infeed
- Object spindle speed range: 1 - 150 rpm
- Servomotor power of the workpiece headstock: 3.5kW
- Torque of the object headstock servomotor: 16.7Nm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a FAS GŁOWNO BUB 40 x 1500 NC cylindrical grinding machine, manufactured in 2024. The machine is new and unused, equipped with a Mitsubishi NC control system. It is currently under lease with ING Lease, with 56 installments remaining and a capital outstanding of EUR 86,061.15. The lease payment is EUR 1,717.22 net per installment, including principal and interest components. An annual insurance policy with ING Lease is also in place.
The machine is designed for grinding workpieces with a maximum diameter of 400 mm and a maximum length of 1500 mm. It features a tusk lift of 200 mm and a distance between claws of 1500 mm. The smallest ground workpiece diameter achievable with a 380 mm diameter grinding wheel is 20 mm. The tailstock pin pitch is 40 mm, and the maximum tailstock clamping force is 4000 N. Both the headstock and tailstock tusk clamps use ISO 296-1991/Morse 5 taper standards.
The machine can handle a maximum workpiece weight of 500 kg in the tusk headstock and up to 100 kg in the chuck, including the chuck itself. Its dimensions are 6650 mm in width, 2400 mm in depth (excluding the desktop), and 1850 mm in height. The total weight of the machine is 7000 kg, with a total power requirement of 38 kVA.
The abrasive wheel cutting edge uses a standard grinding wheel measuring 500 x 80 x 203.2 mm, powered by an 11 kW motor. The rated speed of the grinding wheel spindle varies between 1744 and 2000 rpm depending on the wheel size. The grinding wheel headstock travel is driven by a 2 kW servo motor with 9.5 Nm torque, capable of continuous travel speeds from 2 to 6 m/min and minimum incremental movements of 0.001 mm.
The table travel servo motor has a power of 3.5 kW and torque of 16.7 Nm. Workpiece spindle speeds range from 1 to 150 rpm, driven by a 3.5 kW servomotor providing 16.7 Nm torque.
Visual inspection confirms the machine is in clean and unused condition, with protective plastic wrapping still present on the control panel area. The grinding wheel and spindle assembly, machine bed, and carriage are visible. A flexible coolant hose is positioned near the grinding wheel. The side view shows the enclosure and electrical wiring, with the electrical cabinet door open and cables and components visible. A blue air hose is attached externally. The enclosure and components appear clean and intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | July 29, 2025 |
Машина за външно/вътрешно шлайфане на цилиндри FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
Hrotová bruska vnější / vnitřní FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC Cylindrisk udvendig / indvendig slibemaskine
FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC Rundschleifmaschine
Κυλινδρική εξωτερική / εσωτερική μηχανή λείανσης FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC Cylindrical external / internal grinding machine
Rectificadora cilíndrica FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
Rectifieuse cylindrique FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
Cilindrični vanjski / unutarnji stroj za brušenje FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC Hengeres külső / belső csiszológép
Rettifica cilindrica FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
Cilindrinė išorinė / vidinė šlifavimo mašina FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC Cilindrische uitwendige/inwendige slijpmachine
Szlifierka do wałków/otworów FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
Retificadora cilíndrica externa/interna FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
Mașină de șlefuit exterior/intern cilindric FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC Круглошлифовальный станок
Cilindrična mašina za spoljašnje / unutrašnje brušenje FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC Cylindrisk utvändig / invändig slipmaskin
Silindirik taşlama makinesi FAS GŁOWNO BUB 40 x 1500 NC BUB 40 x 1500 NC
EN
- Languages
English (GB)