Contact us to receive an offer.
| Manufacturer | Fanuc |
|---|---|
| Model | Tape cut w2 |
| Year | 1989 |
| Location | Italy
|
For sale is a Fanuc wire EDM machine, model Tape Cut W2, manufactured in 1989. This wire cutting EDM machine features working axes with travel distances of 550 mm on the X axis, 350 mm on the Y axis, and 250 mm on the Z axis. The machine is equipped with a control panel located on the right side, which includes buttons and a display screen for operation and monitoring.
The machine shows signs of use, including surface wear and some rust on the working area. A protective tinted brown cover is installed over the wire cutting area to help shield the workspace. Workholding fixtures and various tools are present on the table surface adjacent to the machine, which may assist in setup and operation.
The machine dimensions are approximately 2.90 meters in length, 2.90 meters in width, and 2.20 meters in height. Weight data is not available. Included accessories are a System 3R vise and some rolls of wire, which are useful for wire EDM operations.
Operational notes indicate that the filters require replacement and the refrigerator unit is not functioning. It is recommended that an electrician disconnect the machine before transport. The machine is available immediately for viewing.
The control panel display has shown cutting time data of approximately 1956 hours and 14 minutes, along with other operational parameters. The machine has been maintained to remain operational, although no explicit guarantees or warranty are provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
I sell wire EDM fanuc tape cut - w2
Year 1989
Kept well working
available immediately to be viewed
The machine is in working order.
You can see that it works.
The filters need to be changed.
The refrigerator does not work.
Accessories: system 3 r vise, some rolls of wire.
An electrician should come and take it off and then it goes on truck.
Machine dimensions: 2meters 90 x 2.90 h2.20
Weight data not available
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Fanuc Tape cut w2 machine operational?
This Fanuc Tape cut w2 machine is in working condition.
Can the machine be viewed while in operation?
This equipment can be seen in operation.
What maintenance does this machine need?
This machine requires filter replacement.
Is the refrigeration unit operational?
The refrigeration unit is not functioning.
What accessories come with this Fanuc Tape cut w2?
This Fanuc Tape cut w2 includes a System 3R vice as part of the accessories.
What accessories are included with this equipment?
This equipment comes with some rolls of wire as part of the included accessories.
What are the dimensions of this machine?
This machine has dimensions of 2.90 meters by 2.90 meters and a height of 2.20 meters.
Is this Fanuc Tape cut w2 wire erosion machine operational?
This Fanuc Tape cut w2 wire erosion machine is operational.
What maintenance does this equipment need?
This equipment requires filter replacement.
Is the refrigeration unit operational?
The refrigeration unit is not functioning.
What accessories come with this Fanuc Tape cut w2?
This Fanuc Tape cut w2 includes a System 3R vice as part of the accessories.
Are rolls of wire included with the machine?
This machine comes with some rolls of wire included.
What are the dimensions of this equipment?
This equipment has dimensions of 2.90 meters in length, 2.90 meters in width, and 2.20 meters in height.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | Aug. 5, 2026 |
I sell wire EDM fanuc tape cut - w2
Year 1989
Kept well working
available immediately to be viewed
The machine is in working order.
You can see that it works.
The filters need to be changed.
The refrigerator does not work.
Accessories: system 3 r vise, some rolls of wire.
An electrician should come and take it off and then it goes on truck.
Machine dimensions: 2meters 90 x 2.90 h2.20
Weight data not available
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this Fanuc Tape cut w2 machine operational?
This Fanuc Tape cut w2 machine is in working condition.
Can the machine be viewed while in operation?
This equipment can be seen in operation.
What maintenance does this machine need?
This machine requires filter replacement.
Is the refrigeration unit operational?
The refrigeration unit is not functioning.
What accessories come with this Fanuc Tape cut w2?
This Fanuc Tape cut w2 includes a System 3R vice as part of the accessories.
What accessories are included with this equipment?
This equipment comes with some rolls of wire as part of the included accessories.
What are the dimensions of this machine?
This machine has dimensions of 2.90 meters by 2.90 meters and a height of 2.20 meters.
Is this Fanuc Tape cut w2 wire erosion machine operational?
This Fanuc Tape cut w2 wire erosion machine is operational.
What maintenance does this equipment need?
This equipment requires filter replacement.
Is the refrigeration unit operational?
The refrigeration unit is not functioning.
What accessories come with this Fanuc Tape cut w2?
This Fanuc Tape cut w2 includes a System 3R vice as part of the accessories.
Are rolls of wire included with the machine?
This machine comes with some rolls of wire included.
What are the dimensions of this equipment?
This equipment has dimensions of 2.90 meters in length, 2.90 meters in width, and 2.20 meters in height.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
For sale is a Fanuc wire EDM machine, model Tape Cut W2, manufactured in 1989. This wire cutting EDM machine features working axes with travel distances of 550 mm on the X axis, 350 mm on the Y axis, and 250 mm on the Z axis. The machine is equipped with a control panel located on the right side, which includes buttons and a display screen for operation and monitoring.
The machine shows signs of use, including surface wear and some rust on the working area. A protective tinted brown cover is installed over the wire cutting area to help shield the workspace. Workholding fixtures and various tools are present on the table surface adjacent to the machine, which may assist in setup and operation.
The machine dimensions are approximately 2.90 meters in length, 2.90 meters in width, and 2.20 meters in height. Weight data is not available. Included accessories are a System 3R vise and some rolls of wire, which are useful for wire EDM operations.
Operational notes indicate that the filters require replacement and the refrigerator unit is not functioning. It is recommended that an electrician disconnect the machine before transport. The machine is available immediately for viewing.
The control panel display has shown cutting time data of approximately 1956 hours and 14 minutes, along with other operational parameters. The machine has been maintained to remain operational, although no explicit guarantees or warranty are provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | Aug. 5, 2026 |
Fanuc Tape cut w2
Elektroerozivní drátová řezačka Fanuc Tape cut w2
Fanuc Tape cut w2
Fanuc Tape cut w2 Drahterodiermaschine
Fanuc Tape cut w2
Fanuc Tape cut w2 Wire cutting edm machine
Máquina de electroerosión por hilo Fanuc Tape cut w2
Machine d'électro-érosion par fil Fanuc Tape cut w2
Fanuc Tape cut w2
Fanuc Tape cut w2
Elettroerosione a filo Fanuc Tape cut w2
Fanuc Tape cut w2
Fanuc Tape cut w2
Wycinarka drutowa Fanuc Tape cut w2
Fanuc Tape cut w2
Fanuc Tape cut w2
Fanuc Tape cut w2 Электроэрозионный вырезной станок
Fanuc Tape cut w2
Fanuc Tape cut w2
Tel erozyon makinesi Fanuc Tape cut w2
EN
- Languages
English (GB)