| Category | Machining centers - vertical |
| Axis X | 700 mm |
| Axis Y | 400 mm |
| Axis Z | 330 mm |
| Rotary table (4th axis) | no |
| Type of CNC | |
| Table length | mm |
| Table width | mm |
| Max. part weight | 250 kg |
| Number of tool pockets | |
| Spindle taper | |
| Max. spindle speed | 24000 rpm |
| Spindle motor power | kW |
| Length x width x height | 2115.0 × 1900.0 × 2400.0 |
| Weight | 2200 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Fanuc ROBODRILL α-D21LiB5 |
| Last availability date | 20/11/2026 |
| Product id | P260928113 |
| Language |
FANUC ROBODRILL α-D21LiB — vertical 3-axis machining centre (manufactured 2018). This unit is suitable for medium-format machining with a long X-axis travel and high spindle speed. Key features and specifications:
General
- Manufacturer / Model: FANUC ROBODRILL α-D21LiB
- Year manufactured: 2018
- Number of axes: 3
- Machine dimensions (L×W×H): 2115 × 1900 × 2400 mm
- Machine weight: 2200 kg
Axes & travels
- X-axis travel: 700 mm
- Y-axis travel: 400 mm
- Z-axis travel: 330 mm
- Rapid traverse (X/Y/Z): 48 m/min
- Feed rate (X/Y/Z): 1–15,000 mm/min
- Interference radius: 380 mm
- Spindle nose to table: 350–680 mm
Table & workholding
- Clamping area: 850 × 410 mm
- T-slots: 3
- T-slot width: 14H14 mm
- T-slot spacing: 125 / 250 mm
- Table height from floor: 815 mm
- Maximum workpiece/part weight: 250 kg
Spindle & tooling
- Maximum spindle speed: 24,000 rpm
- Spindle taper: SK 30
- Spindle bearing diameter: 50 mm
- Maximum torque: 35 Nm (100% duty)
Tool magazine
- Stations: 21
- Maximum tool diameter: 80 mm
- Maximum tool length: 200 mm
- Tool clamping force: 2,200 N
- Maximum tool weight: 2 kg per tool
- Total tool mass capacity: 23 kg
Cutting capacity & feed forces
- Maximum metal removal rate: 600 cm³
- Maximum drilling diameter: 20 mm
- Maximum tapping: M16
- Feed forces: X = 2,700 N; Y = 2,700 N; Z = 5,400 N
Electrical & control
- Voltage / Frequency: 400 V / 50 Hz
- Connected load: 22 kVA
- Power requirement: 17.6 kW
- Control brand/model: FANUC Series 31i – Model B
Additional equipment listed with the machine
- KNOLL KF 200/950 cooling unit
- KNOLL 300 K-1 chip conveyor
Units available and recorded runtimes
- Unit 1 runtime: 400 h 20 min 5 sec
- Unit 2 runtime: 29,444 h 47 min 12 sec
If you need further clarification on configuration, options, or condition specifics, refer to the seller’s detailed listing for verification.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis FANUC ROBODRILL α-D21LiB was manufactured in 2018. It features an impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a robust clamping area of 850 × 410 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D21LiB vertical machining centre we have for sale. Contact us for further details.Travels and speeds
Rapid traverse (X/Y/Z): 48 m/min
Feed rate (X/Y/Z): 1–15,000 mm/min
Interference radius: 380 mm
Spindle nose to table: 350–680 mm
Table
Clamping area: 850 × 410 mm
T-slots: 3
T-slot width: 14H14 mm
T-slot spacing: 125 / 250 mm
Table height from floor: 815 mm
Max. workpiece weight: 250 kg
Spindle
Spindle bearing diameter: 50 mm
Max. torque: 35 Nm (100% duty)
Tool magazine
Stations: 21
Max. tool diameter: 80 mm
Max. tool length: 200 mm
Tool clamping force: 2,200 N
Max. tool weight: 2 kg/tool
Total tool mass: 23 kg
Cutting capacity
Max. metal removal rate: 600 cm³
Max. drilling diameter: 20 mm
Max. tapping: M16
Feed forces
X-axis: 2,700 N
Y-axis: 2,700 N
Z-axis: 5,400 N
Electrical
Voltage/Frequency: 400 V / 50 Hz
Connected load: 22 kVA
Power requirement: 17.6 kW
Units available and runtimes
Unit 1
Runtime: 400 h 20 min 5 sec
Unit 2
Runtime: 29,444 h 47 min 12 sec
Additional equipment
KNOLL KF 200/950 cooling unit
KNOLL 300 K-1 chip conveyor
Control Brand: FANUC
Control Model: Series 31i – Model B
Machine Height: 2400 mm
Machine Length: 2115 mm
Machine Weight: 2200 kg
Machine Width: 1900 mm
Max. Tool Weight: 23 kg
Number of Axes: 3
Spindle Speed: 24000 RPM
Taper Size: SK 30
X-axis Travel: 700 mm
Y-axis Travel: 400 mm
Z-axis Travel: 330 mm
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2034 |
| Last activity | Nov. 21, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis FANUC ROBODRILL α-D21LiB was manufactured in 2018. It features an impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a robust clamping area of 850 × 410 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D21LiB vertical machining centre we have for sale. Contact us for further details.Travels and speeds
Rapid traverse (X/Y/Z): 48 m/min
Feed rate (X/Y/Z): 1–15,000 mm/min
Interference radius: 380 mm
Spindle nose to table: 350–680 mm
Table
Clamping area: 850 × 410 mm
T-slots: 3
T-slot width: 14H14 mm
T-slot spacing: 125 / 250 mm
Table height from floor: 815 mm
Max. workpiece weight: 250 kg
Spindle
Spindle bearing diameter: 50 mm
Max. torque: 35 Nm (100% duty)
Tool magazine
Stations: 21
Max. tool diameter: 80 mm
Max. tool length: 200 mm
Tool clamping force: 2,200 N
Max. tool weight: 2 kg/tool
Total tool mass: 23 kg
Cutting capacity
Max. metal removal rate: 600 cm³
Max. drilling diameter: 20 mm
Max. tapping: M16
Feed forces
X-axis: 2,700 N
Y-axis: 2,700 N
Z-axis: 5,400 N
Electrical
Voltage/Frequency: 400 V / 50 Hz
Connected load: 22 kVA
Power requirement: 17.6 kW
Units available and runtimes
Unit 1
Runtime: 400 h 20 min 5 sec
Unit 2
Runtime: 29,444 h 47 min 12 sec
Additional equipment
KNOLL KF 200/950 cooling unit
KNOLL 300 K-1 chip conveyor
Control Brand: FANUC
Control Model: Series 31i – Model B
Machine Height: 2400 mm
Machine Length: 2115 mm
Machine Weight: 2200 kg
Machine Width: 1900 mm
Max. Tool Weight: 23 kg
Number of Axes: 3
Spindle Speed: 24000 RPM
Taper Size: SK 30
X-axis Travel: 700 mm
Y-axis Travel: 400 mm
Z-axis Travel: 330 mm
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Category | Machining centers - vertical |
| Axis X | 700 mm |
| Axis Y | 400 mm |
| Axis Z | 330 mm |
| Rotary table (4th axis) | no |
| Type of CNC | |
| Table length | mm |
| Table width | mm |
| Max. part weight | 250 kg |
| Number of tool pockets | |
| Spindle taper | |
| Max. spindle speed | 24000 rpm |
| Spindle motor power | kW |
| Length x width x height | 2115.0 × 1900.0 × 2400.0 |
| Weight | 2200 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Fanuc ROBODRILL α-D21LiB5 |
| Last availability date | 20/11/2026 |
| Product id | P260928113 |
| Language |
FANUC ROBODRILL α-D21LiB — vertical 3-axis machining centre (manufactured 2018). This unit is suitable for medium-format machining with a long X-axis travel and high spindle speed. Key features and specifications:
General
- Manufacturer / Model: FANUC ROBODRILL α-D21LiB
- Year manufactured: 2018
- Number of axes: 3
- Machine dimensions (L×W×H): 2115 × 1900 × 2400 mm
- Machine weight: 2200 kg
Axes & travels
- X-axis travel: 700 mm
- Y-axis travel: 400 mm
- Z-axis travel: 330 mm
- Rapid traverse (X/Y/Z): 48 m/min
- Feed rate (X/Y/Z): 1–15,000 mm/min
- Interference radius: 380 mm
- Spindle nose to table: 350–680 mm
Table & workholding
- Clamping area: 850 × 410 mm
- T-slots: 3
- T-slot width: 14H14 mm
- T-slot spacing: 125 / 250 mm
- Table height from floor: 815 mm
- Maximum workpiece/part weight: 250 kg
Spindle & tooling
- Maximum spindle speed: 24,000 rpm
- Spindle taper: SK 30
- Spindle bearing diameter: 50 mm
- Maximum torque: 35 Nm (100% duty)
Tool magazine
- Stations: 21
- Maximum tool diameter: 80 mm
- Maximum tool length: 200 mm
- Tool clamping force: 2,200 N
- Maximum tool weight: 2 kg per tool
- Total tool mass capacity: 23 kg
Cutting capacity & feed forces
- Maximum metal removal rate: 600 cm³
- Maximum drilling diameter: 20 mm
- Maximum tapping: M16
- Feed forces: X = 2,700 N; Y = 2,700 N; Z = 5,400 N
Electrical & control
- Voltage / Frequency: 400 V / 50 Hz
- Connected load: 22 kVA
- Power requirement: 17.6 kW
- Control brand/model: FANUC Series 31i – Model B
Additional equipment listed with the machine
- KNOLL KF 200/950 cooling unit
- KNOLL 300 K-1 chip conveyor
Units available and recorded runtimes
- Unit 1 runtime: 400 h 20 min 5 sec
- Unit 2 runtime: 29,444 h 47 min 12 sec
If you need further clarification on configuration, options, or condition specifics, refer to the seller’s detailed listing for verification.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2034 |
| Last activity | Nov. 21, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.