| Manufacturer | Fanuc |
|---|---|
| Model | ALPHA-T14iA |
| Year | |
| Location | USA
|
This Fanuc ALPHA-T14iA vertical machining center is equipped with a Fanuc 16-iM CNC control system, providing precise and reliable operation. The machine features a 14-position automatic tool changer, allowing for efficient tool management and reduced downtime during machining processes. Included is a Nikken Model NSVZ180FA CNC 4th axis rotary indexing table, which enhances machining versatility by enabling complex multi-axis operations. A Renishaw tool sensing light is also part of the setup, assisting in accurate tool measurement and setup.
The machining center has a work table measuring approximately 14.96 inches by 21.6 inches, supporting a longitudinal travel (X-axis) of 19.68 inches, a saddle cross travel (Y-axis) of 14.96 inches, and a vertical travel (Z-axis) of 11.81 inches. The spindle nose to table distance ranges from a minimum of 5.9 inches to a maximum of 17.71 inches. It utilizes a #BT-30 spindle taper and offers an infinitely variable spindle speed range from 80 to 8000 RPM. The spindle motor has a horsepower rating of 5.5 kW.
The machine's rapid traverse rates for the X, Y, and Z axes are 1889 inches per minute, with a working feed rate of 590 inches per minute across these axes. The approximate weight of the unit is 3750 lbs.
The exterior of the machine shows some signs of wear and dirt but appears structurally intact. The control panel is mounted on the right side and includes a screen, keypad, multiple buttons and knobs, and an emergency stop button for safety. The tool turret inside the machine holds multiple tool slots, with a visible 14-position tool carousel numbered for easy identification. Hydraulic lines are visible in the work area, indicating the presence of hydraulic components.
The display panel shows machine coordinates and operational data, including recorded operating time of over 19,000 hours and cutting time exceeding 20,000 hours, which may be relevant for assessing usage history. The machine carries a label reading 'ROBO-05 ROBODRIL α-T14 1A.'
Overall, this Fanuc ALPHA-T14iA vertical machining center offers a comprehensive set of features suitable for various precision machining applications, with visible evidence of use but maintained structural integrity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
EQUIPPED WITH:
Fanuc 16-iM CNC Control
14-Position Automatic Tool Changer
Nikken (Model NSVZ180FA) CNC 4th Axis Rotary Indexing Table
Renishaw Tool Sensing Light
CATALOG SPECIFICATIONS:
Table Dimensions (Overall), W x L 14.96" x 21.6"
Table Longitudinal Travel (X-Axis) 19.68"
Saddle Cross Travel (Y-Axis) 14.96"
Vertical Travel (Z-Axis) 11.81"
Spindle Nose to Table, Maximum 17.71"
Spindle Nose to Table, Minimum 5.9"
Spindle Taper #BT-30
Spindle Speeds Range, Inf. Variable 80 to 8000 RPM
Working Feedrate, X, Y, & Z-Axes 590 IPM
Rapid Traverse Rates, X, Y, & Z-Axis' 1889 IPM
Spindle Motor, Horsepower Rating 5.5 KW
Weight Approximately 3750 LBS
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 3 |
| Last activity | June 11, 2026 |
EQUIPPED WITH:
Fanuc 16-iM CNC Control
14-Position Automatic Tool Changer
Nikken (Model NSVZ180FA) CNC 4th Axis Rotary Indexing Table
Renishaw Tool Sensing Light
CATALOG SPECIFICATIONS:
Table Dimensions (Overall), W x L 14.96" x 21.6"
Table Longitudinal Travel (X-Axis) 19.68"
Saddle Cross Travel (Y-Axis) 14.96"
Vertical Travel (Z-Axis) 11.81"
Spindle Nose to Table, Maximum 17.71"
Spindle Nose to Table, Minimum 5.9"
Spindle Taper #BT-30
Spindle Speeds Range, Inf. Variable 80 to 8000 RPM
Working Feedrate, X, Y, & Z-Axes 590 IPM
Rapid Traverse Rates, X, Y, & Z-Axis' 1889 IPM
Spindle Motor, Horsepower Rating 5.5 KW
Weight Approximately 3750 LBS
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Fanuc ALPHA-T14iA vertical machining center is equipped with a Fanuc 16-iM CNC control system, providing precise and reliable operation. The machine features a 14-position automatic tool changer, allowing for efficient tool management and reduced downtime during machining processes. Included is a Nikken Model NSVZ180FA CNC 4th axis rotary indexing table, which enhances machining versatility by enabling complex multi-axis operations. A Renishaw tool sensing light is also part of the setup, assisting in accurate tool measurement and setup.
The machining center has a work table measuring approximately 14.96 inches by 21.6 inches, supporting a longitudinal travel (X-axis) of 19.68 inches, a saddle cross travel (Y-axis) of 14.96 inches, and a vertical travel (Z-axis) of 11.81 inches. The spindle nose to table distance ranges from a minimum of 5.9 inches to a maximum of 17.71 inches. It utilizes a #BT-30 spindle taper and offers an infinitely variable spindle speed range from 80 to 8000 RPM. The spindle motor has a horsepower rating of 5.5 kW.
The machine's rapid traverse rates for the X, Y, and Z axes are 1889 inches per minute, with a working feed rate of 590 inches per minute across these axes. The approximate weight of the unit is 3750 lbs.
The exterior of the machine shows some signs of wear and dirt but appears structurally intact. The control panel is mounted on the right side and includes a screen, keypad, multiple buttons and knobs, and an emergency stop button for safety. The tool turret inside the machine holds multiple tool slots, with a visible 14-position tool carousel numbered for easy identification. Hydraulic lines are visible in the work area, indicating the presence of hydraulic components.
The display panel shows machine coordinates and operational data, including recorded operating time of over 19,000 hours and cutting time exceeding 20,000 hours, which may be relevant for assessing usage history. The machine carries a label reading 'ROBO-05 ROBODRIL α-T14 1A.'
Overall, this Fanuc ALPHA-T14iA vertical machining center offers a comprehensive set of features suitable for various precision machining applications, with visible evidence of use but maintained structural integrity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 3 |
| Last activity | June 11, 2026 |
Обработващ център - вертикален Fanuc ALPHA-T14iA
Obráběcí centrum - vertikální Fanuc ALPHA-T14iA
Bearbejdningscenter - lodret Fanuc ALPHA-T14iA
Fanuc ALPHA-T14iA Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο Fanuc ALPHA-T14iA
Fanuc ALPHA-T14iA
Centro de mecanizado vertical Fanuc ALPHA-T14iA
Centre d'usinage vertical Fanuc ALPHA-T14iA
Obradni centar - vertikalni Fanuc ALPHA-T14iA
Fanuc ALPHA-T14iA Megmunkáló központ - függőleges
Centro di lavoro verticale Fanuc ALPHA-T14iA
Apdirbimo centras – vertikalus Fanuc ALPHA-T14iA
Fanuc ALPHA-T14iA Bewerkingscentrum - verticaal
Pionowe centrum obróbcze Fanuc ALPHA-T14iA
Centro de usinagem - vertical Fanuc ALPHA-T14iA
Centru de prelucrare - vertical Fanuc ALPHA-T14iA
Fanuc ALPHA-T14iA Вертикальный обрабатывающий центр
Obradni centar - vertikalni Fanuc ALPHA-T14iA
Fanuc ALPHA-T14iA Bearbetningscentrum - vertikalt
Dikey işleme merkezi Fanuc ALPHA-T14iA
EN
- Languages
English (GB)