Contact us to receive an offer.
| Manufacturer | EXCETEK |
|---|---|
| Model | V1280/600 |
| Year | 2018 |
| Location | Italy
|
The Industrial EXCETEK V1280/600 is a wire cutting EDM machine designed for precision machining of complex workpieces. Manufactured in 2018, this machine accommodates maximum workpiece dimensions of 1,550 mm in length, 1,200 mm in width, and 595 mm in height, with a maximum workpiece weight capacity of 4,000 kg. The machine features X and Y axis strokes of 1,200 mm and 800 mm respectively, along with a Z-axis travel of 600 mm, enabling versatile machining capabilities.
It supports four simultaneously controllable axes (X, Y, U, V) with AC motors on all five axes, and offers a maximum taper angle of 30° over 100 mm. The allowable wire diameter ranges from 0.2 mm to 0.3 mm, with automatic wire feeding included. The machine's power generator utilizes Mosfet A.C. circuits, delivering a cutting speed up to 360 mm²/min with a 0.3 mm brass wire diameter, and achieves a minimum surface roughness of Ra 0.35.
The numerical control system is based on an industrial 64-bit PC with 1 GB memory and a 15" TFT touchscreen. Data input options include keyboard, RS 232, floppy disk, LAN, and USB interfaces. It features a servo closed-loop positioning system controlling five axes (X, Y, U, V, Z) with a minimum programmable increment of 0.0001 mm.
Additional features include optical scales on the X and Y axes, an unwinder for reels up to 50 kg, sets of 0.25 mm and 0.30 mm wire guides, a conical cutting system, and automatic threading with rethreading after wire breakage. The machine is equipped with a dielectric unit featuring an automatic demineralization system and a refrigeration system to maintain optimal operating temperatures.
The filtering plant has a capacity of 3,000 liters with automatic conductivity and temperature control, supported by a 14-liter resin capacity. The entire plant weighs approximately 9,600 kg.
Visible components include a control panel with a screen, keypad, and emergency stop button located on the right side of the machine, as well as the wire cutting mechanism inside the machine enclosure. A blue metal step platform is positioned in front of the machine for operator access, and a cooling or power unit is situated on the floor to the right of the control panel.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
EXCETEK V1280/600 WIRE EDM
Maximum workpiece dimensions: mm 1,550×1,200×595
Maximum workpiece weight: kg 4,000
X and Y axis strokes: mm 1,200×800
U and V axis travels: mm 260 x 260
Z-axis travel: mm 600
Allowable wire diameter: mm 0.2 - 03
Simultaneously controllable axes: 4 (X, Y, U, V)
Motors: AC on all 5 axes
Maximum taper: 30° on 100mm
Plant weight: kg 9,600
_
Filtering plant
Capacity: Lt 3,000
Conductivity control system: automatic
Resin capacity: Lt 14
Temperature control: automatic
Dielectric refrigeration system: refrigerator
_
Generator
Power circuits: Mosfet A.C.
Minimum roughness: ra 0.35
Cutting speed: mm2/min 360 (brass wire
diam. 0.3)
Automatic threading: standard
Power supply: 400V three-phase
_
Numerical control
Hardware: industrial PC, 64bit
Memory: GB 1
Screen: 15" TFT touchscreen
Data input: keyboard, RS 232, floppy, LAN, USB
Positioning system: servo closed loop
Number of controlled axes: 5 (X, Y, U, V, Z)
Minimum programmable increment: mm 0.0001
_
Machine complete with:
- Optical scales on X and Y axes
- Z axis 600mm
- Unwinder for reels up to 50kg
- N. 01 set of 0.25mm guides
- No. 01 set of 0.30mm guides
- Conical cutting system
- Automatic thread threading and rethreading after breakage
- Fastening system: frame with universal drilling
- 64bit numerical control with 16 Gb memory
- A.C. power generator with anti-electrolysis device
- Automatic technology generation
- Serial interface, floppy drive, LAN, USB
- Dielectric unit with automatic demineralization system
- Refrigerator
_
Year of construction: 2018
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 71 |
| Last activity | Nov. 2, 2026 |
EXCETEK V1280/600 WIRE EDM
Maximum workpiece dimensions: mm 1,550×1,200×595
Maximum workpiece weight: kg 4,000
X and Y axis strokes: mm 1,200×800
U and V axis travels: mm 260 x 260
Z-axis travel: mm 600
Allowable wire diameter: mm 0.2 - 03
Simultaneously controllable axes: 4 (X, Y, U, V)
Motors: AC on all 5 axes
Maximum taper: 30° on 100mm
Plant weight: kg 9,600
_
Filtering plant
Capacity: Lt 3,000
Conductivity control system: automatic
Resin capacity: Lt 14
Temperature control: automatic
Dielectric refrigeration system: refrigerator
_
Generator
Power circuits: Mosfet A.C.
Minimum roughness: ra 0.35
Cutting speed: mm2/min 360 (brass wire
diam. 0.3)
Automatic threading: standard
Power supply: 400V three-phase
_
Numerical control
Hardware: industrial PC, 64bit
Memory: GB 1
Screen: 15" TFT touchscreen
Data input: keyboard, RS 232, floppy, LAN, USB
Positioning system: servo closed loop
Number of controlled axes: 5 (X, Y, U, V, Z)
Minimum programmable increment: mm 0.0001
_
Machine complete with:
- Optical scales on X and Y axes
- Z axis 600mm
- Unwinder for reels up to 50kg
- N. 01 set of 0.25mm guides
- No. 01 set of 0.30mm guides
- Conical cutting system
- Automatic thread threading and rethreading after breakage
- Fastening system: frame with universal drilling
- 64bit numerical control with 16 Gb memory
- A.C. power generator with anti-electrolysis device
- Automatic technology generation
- Serial interface, floppy drive, LAN, USB
- Dielectric unit with automatic demineralization system
- Refrigerator
_
Year of construction: 2018
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Industrial EXCETEK V1280/600 is a wire cutting EDM machine designed for precision machining of complex workpieces. Manufactured in 2018, this machine accommodates maximum workpiece dimensions of 1,550 mm in length, 1,200 mm in width, and 595 mm in height, with a maximum workpiece weight capacity of 4,000 kg. The machine features X and Y axis strokes of 1,200 mm and 800 mm respectively, along with a Z-axis travel of 600 mm, enabling versatile machining capabilities.
It supports four simultaneously controllable axes (X, Y, U, V) with AC motors on all five axes, and offers a maximum taper angle of 30° over 100 mm. The allowable wire diameter ranges from 0.2 mm to 0.3 mm, with automatic wire feeding included. The machine's power generator utilizes Mosfet A.C. circuits, delivering a cutting speed up to 360 mm²/min with a 0.3 mm brass wire diameter, and achieves a minimum surface roughness of Ra 0.35.
The numerical control system is based on an industrial 64-bit PC with 1 GB memory and a 15" TFT touchscreen. Data input options include keyboard, RS 232, floppy disk, LAN, and USB interfaces. It features a servo closed-loop positioning system controlling five axes (X, Y, U, V, Z) with a minimum programmable increment of 0.0001 mm.
Additional features include optical scales on the X and Y axes, an unwinder for reels up to 50 kg, sets of 0.25 mm and 0.30 mm wire guides, a conical cutting system, and automatic threading with rethreading after wire breakage. The machine is equipped with a dielectric unit featuring an automatic demineralization system and a refrigeration system to maintain optimal operating temperatures.
The filtering plant has a capacity of 3,000 liters with automatic conductivity and temperature control, supported by a 14-liter resin capacity. The entire plant weighs approximately 9,600 kg.
Visible components include a control panel with a screen, keypad, and emergency stop button located on the right side of the machine, as well as the wire cutting mechanism inside the machine enclosure. A blue metal step platform is positioned in front of the machine for operator access, and a cooling or power unit is situated on the floor to the right of the control panel.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 71 |
| Last activity | Nov. 2, 2026 |
Телена електроерозийна машина EXCETEK V1280/600
Drátový elektroerozivní stroj EXCETEK V1280/600
EXCETEK V1280/600 Trådgnistmaskiner
EXCETEK V1280/600 Drahterodiermaschine
Μηχανή ηλεκτροδιάβρωσης με σύρμα EXCETEK V1280/600
EXCETEK V1280/600 Wire cutting EDM machine
Máquina de electroerosión por hilo EXCETEK V1280/600
Machines d’électroérosion à fil EXCETEK V1280/600
Elektroerozijski stroj s žicom EXCETEK V1280/600
EXCETEK V1280/600 Huzalos szikraforgácsoló gépek
Macchina per elettroerosione a filo EXCETEK V1280/600
EXCETEK V1280/600 Vielinės elektroerozinio pjovimo staklės
EXCETEK V1280/600 Draadvonkmachines
Drążarki elektroerozyjne drutowe EXCETEK V1280/600
Máquina de eletroerosão a fio EXCETEK V1280/600
Mașini de electroeroziune cu fir EXCETEK V1280/600
EXCETEK V1280/600 Проволочно-вырезной электроэрозионный станок
Elektroeroziona mašina sa žicom EXCETEK V1280/600
EXCETEK V1280/600 Trådgnistmaskiner
Tel erozyon makinesi EXCETEK V1280/600
EN
- Languages
English (GB)