Contact us to receive an offer.
| Manufacturer | EXCETEK |
|---|---|
| Model | V 1280/600 |
| Year | 2018 |
| Location | Italy
|
Overview:
This listing describes a wire EDM (electroerosion a filo) machine model EXCETEK V 1280/600 with detailed machine capacities, axis travels, and included systems and accessories. The specification list below reflects the information provided in the product documentation.
Workpiece capacity and axes:
- Maximum piece dimensions: mm 1.550 × 1.200 × 595.
- Maximum piece weight: kg 4.000.
- X and Y travel: mm 1.200 × 800.
- U and V travel: mm 260 × 260 (auxiliary axes for wire offset/control).
- Z axis travel: mm 600.
- Simultaneously controllable axes: 4 (X, Y, U, V).
- Number of controlled axes: 5 (X, Y, U, V, Z).
- Positioning system: closed ring servo-assisted.
- Motors: AC on all 5 axes.
- Minimum programmable increment: mm 0,0001.
Wire, cutting and surface performance:
- Admissible wire diameter: mm 0,2 – 03.
- Sets of guides included: one set from 0,25 mm and one set from 0,30 mm.
- Maximum taper capacity: 30° on 100 mm.
- Minimum achievable roughness: Ra 0,35.
- Cutting speed: mm2/min 360 (specified for copper wire diameter 0,3).
- Automatic wire feeding and automatic refeeding after break are listed as standard.
Electrical, control and interfaces:
- Power supply: 400 V three-phase.
- Generator: Mosfet C.A. power circuits with anti-electrolysis device.
- Numerical control: Industrial PC, 64-bit. Memory is listed in the documentation (entries show both GB 1 and 16 GB); please verify which applies.
- Screen: 15" TFT touchscreen.
- Data entry / interfaces: keyboard, RS-232, floppy, LAN, USB.
Dielectric, filtration and auxiliaries:
- Filter system capacity: Lt 3.000.
- Resin capacity: Lt 14.
- Conductivity control: automatic.
- Temperature control: automatic.
- Dielectric cooling: refrigerator.
- Dielectric group with automatic demineralization system is listed.
Included items and accessories:
- Optical lines on X and Y axes.
- Z axis 600 mm (as noted in travel specs).
- Spindle for coils up to 50 kg.
- Taper cutting system.
- Fixing system: frame with universal drilling.
- Serial interface, floppy reader, LAN, USB (as listed).
Additional notes:
- Installation weight: kg 9.600.
- The documentation lists several control/memory entries; please confirm the numerical control memory specification prior to purchase.
- All details above are reported from the provided product information; no additional condition claims (tested, refurbished, or warranty) are included.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Maximum dimensions of the piece: mm 1.550×1.200×595. Maximum weight of the piece: kg 4.000. Axes X and Y travel: mm 1.200 x 800. Axes U and V travel: mm 260 x 260. Z axis travel: mm 600. Admissible wire diameter: mm 0,2 – 03. Simultaneously controllable axes: 4 (X, Y, U, V). Motors: AC on all 5 axes. Maximum taper: 30° on 100mm. Installation weight: kg 9.600. Filter system capacity: Lt 3.000. Conductivity control system: automatic. Resin capacity: Lt 14. Temperature control: automatic. Dielectric cooling system: refrigerator. Generator: Mosfet C.A. power circuits. Minimum roughness: ra 0,35. Cutting speed: mm2/min 360 (wire copper diam. 0,3). Automatic wire feeding: standard. Power supply: 400V three-phase. Numerical control: Industrial PC, 64bit. Memory: GB 1. Screen: TFT touchscreen 15”. Data entry: keyboard, RS 232, floppy, LAN, USB. Positioning system: closed ring servo-assisted. Number of controlled axes: 5 (X, Y, U, V, Z). Minimum programmable increment: mm 0,0001. The machine is complete with: Optical lines on axes X and Y. Z axis 600mm. Spindle for coils up to 50kg. N. 01 set of guides from 0,25mm. N. 01 set of guides from 0,30mm. Taper cutting system. Automatic wire feeding and refeeding after break. Fixing system: frame with universal drilling. Numerical control 64bit with 16 Gb of memory. Power generator in C.A. with anti-electrolisis device. Automatic technology generation. Serial interface, floppy reader, LAN, USB. Dielectric group with automatic demineralization system. Refrigerator.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 70 |
| Last activity | Nov. 3, 2026 |
Maximum dimensions of the piece: mm 1.550×1.200×595. Maximum weight of the piece: kg 4.000. Axes X and Y travel: mm 1.200 x 800. Axes U and V travel: mm 260 x 260. Z axis travel: mm 600. Admissible wire diameter: mm 0,2 – 03. Simultaneously controllable axes: 4 (X, Y, U, V). Motors: AC on all 5 axes. Maximum taper: 30° on 100mm. Installation weight: kg 9.600. Filter system capacity: Lt 3.000. Conductivity control system: automatic. Resin capacity: Lt 14. Temperature control: automatic. Dielectric cooling system: refrigerator. Generator: Mosfet C.A. power circuits. Minimum roughness: ra 0,35. Cutting speed: mm2/min 360 (wire copper diam. 0,3). Automatic wire feeding: standard. Power supply: 400V three-phase. Numerical control: Industrial PC, 64bit. Memory: GB 1. Screen: TFT touchscreen 15”. Data entry: keyboard, RS 232, floppy, LAN, USB. Positioning system: closed ring servo-assisted. Number of controlled axes: 5 (X, Y, U, V, Z). Minimum programmable increment: mm 0,0001. The machine is complete with: Optical lines on axes X and Y. Z axis 600mm. Spindle for coils up to 50kg. N. 01 set of guides from 0,25mm. N. 01 set of guides from 0,30mm. Taper cutting system. Automatic wire feeding and refeeding after break. Fixing system: frame with universal drilling. Numerical control 64bit with 16 Gb of memory. Power generator in C.A. with anti-electrolisis device. Automatic technology generation. Serial interface, floppy reader, LAN, USB. Dielectric group with automatic demineralization system. Refrigerator.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview:
This listing describes a wire EDM (electroerosion a filo) machine model EXCETEK V 1280/600 with detailed machine capacities, axis travels, and included systems and accessories. The specification list below reflects the information provided in the product documentation.
Workpiece capacity and axes:
- Maximum piece dimensions: mm 1.550 × 1.200 × 595.
- Maximum piece weight: kg 4.000.
- X and Y travel: mm 1.200 × 800.
- U and V travel: mm 260 × 260 (auxiliary axes for wire offset/control).
- Z axis travel: mm 600.
- Simultaneously controllable axes: 4 (X, Y, U, V).
- Number of controlled axes: 5 (X, Y, U, V, Z).
- Positioning system: closed ring servo-assisted.
- Motors: AC on all 5 axes.
- Minimum programmable increment: mm 0,0001.
Wire, cutting and surface performance:
- Admissible wire diameter: mm 0,2 – 03.
- Sets of guides included: one set from 0,25 mm and one set from 0,30 mm.
- Maximum taper capacity: 30° on 100 mm.
- Minimum achievable roughness: Ra 0,35.
- Cutting speed: mm2/min 360 (specified for copper wire diameter 0,3).
- Automatic wire feeding and automatic refeeding after break are listed as standard.
Electrical, control and interfaces:
- Power supply: 400 V three-phase.
- Generator: Mosfet C.A. power circuits with anti-electrolysis device.
- Numerical control: Industrial PC, 64-bit. Memory is listed in the documentation (entries show both GB 1 and 16 GB); please verify which applies.
- Screen: 15" TFT touchscreen.
- Data entry / interfaces: keyboard, RS-232, floppy, LAN, USB.
Dielectric, filtration and auxiliaries:
- Filter system capacity: Lt 3.000.
- Resin capacity: Lt 14.
- Conductivity control: automatic.
- Temperature control: automatic.
- Dielectric cooling: refrigerator.
- Dielectric group with automatic demineralization system is listed.
Included items and accessories:
- Optical lines on X and Y axes.
- Z axis 600 mm (as noted in travel specs).
- Spindle for coils up to 50 kg.
- Taper cutting system.
- Fixing system: frame with universal drilling.
- Serial interface, floppy reader, LAN, USB (as listed).
Additional notes:
- Installation weight: kg 9.600.
- The documentation lists several control/memory entries; please confirm the numerical control memory specification prior to purchase.
- All details above are reported from the provided product information; no additional condition claims (tested, refurbished, or warranty) are included.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 70 |
| Last activity | Nov. 3, 2026 |
Телена електроерозийна машина EXCETEK V 1280/600
Drátový elektroerozivní stroj EXCETEK V 1280/600
EXCETEK V 1280/600 Trådgnistmaskiner
EXCETEK V 1280/600 Drahterodiermaschine
Μηχανή ηλεκτροδιάβρωσης με σύρμα EXCETEK V 1280/600
EXCETEK V 1280/600 Wire cutting EDM machine
Máquina de electroerosión por hilo EXCETEK V 1280/600
Machines d’électroérosion à fil EXCETEK V 1280/600
Elektroerozijski stroj s žicom EXCETEK V 1280/600
EXCETEK V 1280/600 Huzalos szikraforgácsoló gépek
Macchina per elettroerosione a filo EXCETEK V 1280/600
EXCETEK V 1280/600 Vielinės elektroerozinio pjovimo staklės
EXCETEK V 1280/600 Draadvonkmachines
Drążarki elektroerozyjne drutowe EXCETEK V 1280/600
Máquina de eletroerosão a fio EXCETEK V 1280/600
Mașini de electroeroziune cu fir EXCETEK V 1280/600
EXCETEK V 1280/600 Проволочно-вырезной электроэрозионный станок
Elektroeroziona mašina sa žicom EXCETEK V 1280/600
EXCETEK V 1280/600 Trådgnistmaskiner
Tel erozyon makinesi EXCETEK V 1280/600
EN
- Languages
English (GB)