| Manufacturer | EUROTECNO |
|---|---|
| Model | E12535D |
| Year | 2004 |
| Location | Spain
|
EUROTECNO E12535D single-screw extruder, manufactured in 2004, with a 125 mm screw diameter and an L/D ratio of 35:1. The stated output capacity is up to 550 kg/h, depending on material. The listed configuration includes a high-efficiency heating system with 6–8 independent barrel zones, ceramic band heaters and forced-air cooling, as well as a double vacuum degassing system with a liquid-ring pump.
The described line includes a force feeder or crammer hopper for film flakes and shredded regrind, a continuous hydraulic dual-plate screen changer and a hot die-face water-ring pelletizer. Cooling and downstream handling equipment are listed as a horizontal centrifugal dryer, vibrating classifier screen, pneumatic conveying blower, cyclone and bagging silo. These accessories are described as part of the line; their operating status is not specified.
The equipment comprises a long extruder body with feed hoppers and material-handling connections, a large drive assembly, several motors, control cabinets and connected pipes and hoses. A protective cover and access platform with steps are also present. The machine surfaces show dust, scuffing and general signs of use, including wear to the protective cover. No operating or testing status is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Single screw extruder manufactured in 2004. This EUROTECNO E12535D features a screw diameter of 125 mm and an L/D ratio of 35:1, with an output capacity of approximately 350 – 550 kg/h. It includes a high-efficiency heating system with 6 to 8 independent zones and a double vacuum degassing system. If you are looking to get high-quality extrusion capabilities, consider the EUROTECNO E12535D machine we have for sale. Contact us for further details.Screw type: Single screw
L/D ratio: 35:1 (35D)
Number of screws/mechanical shafts: 1
Output capacity: Approx. 350–550 kg/h (material dependent)
Main motor: AC electric with inverter drive (VFD), 110–160 kW (standard for Ø125 mm)
Screw speed: Electronically adjustable, approx. 0–120 RPM
Transmission: Heavy-duty, oil-cooled gearbox
Barrel heating zones: 6–8 independent zones
Heater type: High-efficiency ceramic band heaters
Barrel cooling: Forced-air cooling fans per zone
Degassing/venting: Double vacuum degassing system with liquid ring pump
Additional equipment
Feeding system: Force feeder / crammer hopper for film flakes and shredded regrind
Screen changer: Continuous hydraulic dual-plate screen changer
Pelletizing: Hot die-face water-ring pelletizer
Cooling & dewatering: Horizontal centrifugal dryer and vibrating classifier screen
Conveying & storage: Pneumatic blower to cyclone and bagging silo
Screw Diameter: 125 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 1, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Single screw extruder manufactured in 2004. This EUROTECNO E12535D features a screw diameter of 125 mm and an L/D ratio of 35:1, with an output capacity of approximately 350 – 550 kg/h. It includes a high-efficiency heating system with 6 to 8 independent zones and a double vacuum degassing system. If you are looking to get high-quality extrusion capabilities, consider the EUROTECNO E12535D machine we have for sale. Contact us for further details.Screw type: Single screw
L/D ratio: 35:1 (35D)
Number of screws/mechanical shafts: 1
Output capacity: Approx. 350–550 kg/h (material dependent)
Main motor: AC electric with inverter drive (VFD), 110–160 kW (standard for Ø125 mm)
Screw speed: Electronically adjustable, approx. 0–120 RPM
Transmission: Heavy-duty, oil-cooled gearbox
Barrel heating zones: 6–8 independent zones
Heater type: High-efficiency ceramic band heaters
Barrel cooling: Forced-air cooling fans per zone
Degassing/venting: Double vacuum degassing system with liquid ring pump
Additional equipment
Feeding system: Force feeder / crammer hopper for film flakes and shredded regrind
Screen changer: Continuous hydraulic dual-plate screen changer
Pelletizing: Hot die-face water-ring pelletizer
Cooling & dewatering: Horizontal centrifugal dryer and vibrating classifier screen
Conveying & storage: Pneumatic blower to cyclone and bagging silo
Screw Diameter: 125 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
EUROTECNO E12535D single-screw extruder, manufactured in 2004, with a 125 mm screw diameter and an L/D ratio of 35:1. The stated output capacity is up to 550 kg/h, depending on material. The listed configuration includes a high-efficiency heating system with 6–8 independent barrel zones, ceramic band heaters and forced-air cooling, as well as a double vacuum degassing system with a liquid-ring pump.
The described line includes a force feeder or crammer hopper for film flakes and shredded regrind, a continuous hydraulic dual-plate screen changer and a hot die-face water-ring pelletizer. Cooling and downstream handling equipment are listed as a horizontal centrifugal dryer, vibrating classifier screen, pneumatic conveying blower, cyclone and bagging silo. These accessories are described as part of the line; their operating status is not specified.
The equipment comprises a long extruder body with feed hoppers and material-handling connections, a large drive assembly, several motors, control cabinets and connected pipes and hoses. A protective cover and access platform with steps are also present. The machine surfaces show dust, scuffing and general signs of use, including wear to the protective cover. No operating or testing status is provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 1, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Bosnia and Herzegovina
1992
| Screw diameter | 60 mm |
|---|
| Output | 120 kg/h |
|---|
Greece
2025
| Screw diameter | 85 mm |
|---|---|
| Output | 250 kg/h |
| Plastifying capacity | 250 kg/h |
|---|
Czech Republic
2014
Turkey
1997
| Screw diameter | 90 mm |
|---|---|
| Output | 400 kg/h |
| Plastifying capacity | 400 kg/h |
|---|
| Output | 600 kg/h |
|---|
Spain
2003
| Screw diameter | 65 mm |
|---|
| Output | 240 kg/h |
|---|
Spain
2000
Slovenia
2009
Czech Republic
| Screw diameter | 63 mm |
|---|
Germany
Spain
2015
| Screw diameter | 55 mm |
|---|
| Output | 170 kg/h |
|---|
Spain
1997
| Screw diameter | 130 mm |
|---|
| Output | 400 kg/h |
|---|
Spain
2006
| Screw diameter | 105 mm |
|---|
| Output | 350 kg/h |
|---|
Spain
2014
| Screw diameter | mm |
|---|---|
| Output | kg/h |
| Plastifying capacity | kg/h |
|---|
Spain
2015
| Screw diameter | 80 mm |
|---|
| Output | 300 kg/h |
|---|
Spain
2015
| Screw diameter | 100 mm |
|---|
| Output | 550 kg/h |
|---|
Spain
2014
| Screw diameter | 105 mm |
|---|
| Output | 300 kg/h |
|---|
Spain
2014
| Screw diameter | 130 mm |
|---|
| Output | 500 kg/h |
|---|
| Screw diameter | 130 mm |
|---|
| Output | 350 kg/h |
|---|
| Screw diameter | 80 mm |
|---|
Spain
1999
Spain
2004
| Screw diameter | 90 mm |
|---|---|
| Output | 280 kg/h |
| Plastifying capacity | 280 kg/h |
|---|
Едношнеков екструдер EUROTECNO E12535D
Jednošnekový extrudér EUROTECNO E12535D
EUROTECNO E12535D Enkeltsnegleekstruder
EUROTECNO E12535D Einschneckenextruder
Μονόκοχλιος εξωθητήρας EUROTECNO E12535D
EUROTECNO E12535D Single screw extruder
Extrusora monohusillo EUROTECNO E12535D
Extrudeuse monovis EUROTECNO E12535D
Jednopužni ekstruder EUROTECNO E12535D
EUROTECNO E12535D Egycsigás extruder
Estrusore monovite EUROTECNO E12535D
EUROTECNO E12535D Vienos sraigės ekstruderis
EUROTECNO E12535D Enkelschroefextruder
Wytłaczarka jednoślimakowa EUROTECNO E12535D
Extrusora de rosca simples EUROTECNO E12535D
Extruder cu un singur șnec EUROTECNO E12535D
EUROTECNO E12535D Одношнековый экструдер
Jednošnekni ekstruder EUROTECNO E12535D
EUROTECNO E12535D Enkelskruvsextruder
Tek vidalı ekstrüder EUROTECNO E12535D
Romania
Belarus
EN
- Languages
English (GB)